Sudden HIGH Ram use (70-80%)
HI :)
I was wondering WHY it takes as much memory when the startup of Windows 7? It takes about 70-80% of my RAM. So sometimes, it falls to 20-30%. I don't know if it's because Windows is always responsible for elements of start/programs, but sometimes it REMAINS to 70/80%.
I don't really have a lot of programs that run at startup (less than 10 actually (seen by MSCONFIG)). And when I disable some services, make sure the "Hide all Microsoft services" checkbox is unchecked, means, I don't mess with my Windows services so that shouldn't be the problem. The services THAT I disabled are those which are useless / those who are NOT needed to be enabled automatically.
Now type these words on the right, I have 40% of the consumed RAM, with basic services of windows that run and some user defined ones (Advanced System Care, CCleaner, Avast, 7 (total of 252 MB for Chrome) Chrome running services). Google Chrome is not the cause of the problem, we all know Chrome should be like this (* EW) and Explorer.exe consuming 18MB.
So guys what I need to know is:
I know that this is not normal cause sometimes it falls 20%, but sometimes it doesn't, so WHAT could be the cause?
I have no need to speed up my computer cause, is not slowing down with a problem like that, but it worries me, then, HOW can reduce the percentage of use of my ram other than the closure of other unnecessary applications I?
I have a lot of maintenance such as Avast, Advanced System Care, IObit Malware Fighter programs (which works only no substantive and rarely used) and CCleaner. And I still my turned on Windows Defender, Yes, having a lot of maintenance, programs that run on the bottom could be the problem?
Some of my features of the system:
Windows 7 Ultimate 32 bit
Intel Core 2 Quad 2.33 GHz
2 GB of Ram
A few notes:
* Selective startup is selected with "Boot Configuration initial use ' unchecked
* System Boot Configuration settings intact, unchanged
* With Avast and CSA, I scan my system a little as 5 - 10 times a day, so NO virus. IObit Malware Fighter, WITHOUT adware, spyware or potentially unwanted software with Windows Defender.
Any response will be gladly appreciated :)
SA
I'm glad you work. If you installed Avast defender is DISABLED
Tags: Windows
Similar Questions
-
Use of very high ram of the Mac mini end of 2012 after startup
Hello my name is Ogi.Recently I have problem with my mac mini 2012.I end had a problem starting, so I used the startup, says apple. This problem has been resolved. But then another problem showed. Now, after I turn my mac mini on when I'll be on the desk I noticed that my mac is really slow. Then I open the activity monitor and watched. Wow 3.50 GB of ram used off 4. and I have not any startup programs. Now, so my mac is pretty useless. And btw, before when I started my mac I got 2.50 GB used and free 2.50, it is normal. Help, please!
Thanks in advance
When you use a memory
Run and view the results here so that we know more about your configuration.
From Mavericks, OSX tries to use all of the memory. Memory is not actively used is used to cache of files that may be needed.
-
Screen fail when high RAM is required
My screen like the image below look when I open automatic software like Photoshop, Google Maps, or DAO, I'm guessing that any program with high ram and/or video on demand
It started two days before, when I open Auto CAD, but I used to push harder for my mac, I mean, I was nothing compared to other times.
When I close the program, the screen returns to normal.
I have a macbook pro 15 "beginning 2011
8 GB ram
OS X El Capitan 10.11.5
2.2 GHz intel Core i7
Intel HD Graphics 3000 512 mb
Processor of AMD Radeon HD 6750 M graphics with 1 GB of GDDR5
Any ideas it might be and how could we to address?
Thank you
Would be - this problem:
http://www.Apple.com/support/MacBookPro-videoissues/
In any case make an appointment at an Apple store Genius Bar.
Shop Apple Store - Genius Bar
https://www.Apple.com/retail/Geniusbar/
This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.
-
100% ram used on Data-Guard
Hello
We test our application with Oracle data guard.
Is version of Oracle 11 g R2 (11.2.0.2)
The configuration of data-guard is a primary and a physical standby server.
Both servers have 16 GB of RAM. It is set on an ESX Server as two virtual machines.
Each vm has two processors with a speed 2127,902 MHz
OS is Red Hat Enterprise Linux Server version 5.5 (Tikanga)
It's an arch bit x86_64 machine.
The problem we see is that the consumption of RAM is almost 100%. (97%)
Earlier, the RAM has 4 GB, believed is not enough and went to 16 GB after we found that same 8 GB is not enough.
Even after setting the RAM 16 GB, entire memory was used.
The demand for good results, the answers are quick enough.
On average, there are 12000 inserts per minute in the database.
The CPU usage is about 25%.
We are looking to reduce the consumption of memory less than 80% so that if other applications must be run on the Data-Guard allows him to run or use nearly 100% of memory during the peak or abnormal conditions.
It is a facility dedicated with instance what a single database that is running on the firewall data.
Here is the use of memory (in MB)
< -.
[root@vm-lnx-rds1174 logs] free no. m
total used free shared buffers cached
MEM: 16051 15650 401 0 267 13532
-/ + buffers/cache: 1850 14201
Swap: 8095 0 8095
->
Here is the related configuration memory set to the oracle instance.
< -.
change the system shared_pool_size set = 0 scope = spfile;
change the system db_cache_size set = 0 scope = spfile;
change the system java_pool_size set = 0 scope = spfile;
ALTER system set LARGE_POOL_SIZE is 0 scope = spfile;.
change the system sga_max_size set = 0 scope = spfile;
ALTER system set sga_target is 0 scope = spfile;.
ALTER system set pga_aggregate_target is 0 scope = spfile;.
ALTER system set MEMORY_TARGET = 8G scope = spfile;
ALTER system set MEMORY_MAX_TARGET = 8G scope = spfile;
->
Details of the Configuration of Data-Guard:
< -.
DGMGRL > see Configuring
Configuration - DGConfig1
Protection mode: MaxPerformance
Databases:
PNETs - primary
PNET - Physical standby database
Fast-Start Failover: DISABLED
The configuration status:
SUCCESS
->
Please advice how we can reduce the memory consumption on the machine.
Thank you
KrishnaHello
on Linux, high mem use is normal. Linux uses all the memory cache of the drive. You can compile this program to prove.
#include
#include #include #include int main(int ac, char **av) { long int n,m,i; long delay; char *buf; if(ac < 3) { printf("Usage: %s \n",av[0]); exit(1); } sscanf(av[1],"%d",&n); sscanf(av[2],"%d",&delay); m=n*1024*1024; buf=malloc(n*1024*1024); // for(i=0;i and run it as follows:
. 4000 10 a.outIt will affect 4000 MB of ram 10 seconds. You'll see that once it's over, you have 4 000 MB of free ram. After awhile, this amount will be lower that linux will do IO operations.
Paul
-
I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?
In addition, the Console has opened with the same message several times, but I don't know what that means.
Any help would be appreciated.
Hello
The last is a picture of the Terminal window.
Just because it lists 'Console' does not mean that it has nothing to do with this application.
You have not said why or what you're trying to install so I can't help with that.
You can use the activity monitor to leave their.
After you select an item, use the X in a type of stop sign icon and confirm force quit.
21:36 Thursday; September 15, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
"High computer use" system error appears frequently.
"High computer use" system error appears frequently. Minimum of 768 MB of virtual memory and 1149MB max, but using 902 MB. Also when this error occurs I'll check the details and parameters, and it shows that everything is normal. Do I have to change my swap file size, system not indicativ of a virus. I use Verizon 'high speed internet', but it doesn't seem to be high speed for me. I have cleared the system event logs, defragged the hard drive and played all Windows performance tools.
"High computer use" is not a standard Windows message. If this is in fact the message you see, you need to determine what application it brings and what it means.
If this isn't the exact text that you see, please provide the full text of the message, without paraphrasing.
In general, you should leave the page file setting in the ' System Managed. Windows does a good job to manage page - better file that these articles "tweak your computer" might suggest.
The speed of your Internet connection will depend on many factors, but you can get an idea of how "fast" your connection is using one of the speed of the tests here-->
http://www.dslreports.com/stest
http://www.Speedtest.NET/
http://my.Verizon.com/services/Speedtest/ -
I am trying to remove all the printing to epson artiasn from my computer software, I use Windows XP. I can delete all except Epson Fax software. My norton 360 opens with a note saying: high energy use Epson Fax software 99% of CPU usage. I called Epson, they cannot help me remove the program. I spent 6 hours trying to remove the program, I did a full scan for all and all the viruses I tried to delete 100 times (the envy) and I still can't get out this Norton tell me that it's on an efxijrmv.exe file but I can not locate this file you can help me. I couldn't afford your 800 number to pay for the service, I just lost my job after 40 years in the business. Is there something I can do?
Thank you
Phil
Hi Phil,
Follow the steps in the article.
How to solve problems when you install or uninstall programs on a Windows computer
How to manually remove programs from the add tool / remove programs
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
-
I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
Unable to save my movie in high resolution using Movie Maker 2.6 (Win 7)
Hello:
I spent a ton of time and produced a slide show of wedding for the wedding of my daughter with overlay of music and various transitions. After all that work, I can't save my project in the movies high resolution using Movie Maker 2.6. I tried to go up to 512K Broadband (except option). But anything on this resolution, the film becomes black at some point. But you can still here the music. Why? Is it possible to go to resolutions higher for a slide show of bin? It is a powerful laptop with plenty of memory.
I have closed all other applications. Uncontrolled codec / file type compatibility etc. No difference. BTW, the file does not transfer or open to the latest Live Movie Maker help. That might have been a solution.
Any help would be appreciated.
Kind regards
Kevin K.Hello
My friend John Papa - MVP - is the expert on Windows Movie Maker.
PapaJohn.org
http://Papajohn.org/PapaJohn - online tutorials
http://www.Papajohn.org/mm2-online-tutorials.htmlWindows Movie Maker Tutorials - see the menu on the left and others on the main screen.
http://www.windowsmoviemakers.NET/tutorials/Windows Live Movie Maker help & how-to and Forums are good sources of information:
Windows Live Movie Maker that works in Vista and Windows 7
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3Official Support of responses - Movie Maker Forums site-
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=no====================
These might help:
Getting started with Windows Movie Maker
Import video, photos and audio on Windows Movie Maker
Get a movie in Windows Movie Maker
Make a movie quickly in Windows Movie Maker (AutoMovie)
Publish a movie in Windows Movie Maker
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
High disk use and high memory usage
It seems that my friend helped clean up my laptop I will still have a lot of problems. First my laptop becomes the high memory use. What? The system apparently when I look at the Task Manager. Here's what it looks like:
I don't know how to solve this problem. Keep looking it towards the top online and I haven't found anything that helps. I'm not a tech somehow so when you say something like "have you checked your drivers? I will say that I have no idea how to do that. As you can see the the Service Host: Local System has a lot of memory for some reason use any. And the system takes a lot of space for some strange reason. He is also windows modules Installer. I can't update my laptop Windows 8 for Windows 8.1
Another problem is that I can't get my cell trusts. I go on Internet explore and copy and paste the link that appears on the screen in another tab on him and he always says the same thing 'Open in Internet Explorer' and it still doesn't work!
I should also mention that my friend had to do a system restore to clean all the problems I had before. Who has worked for the most part. Since my laptop was running slower and he's still but a little better.
Any help would be great.
In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wikiIf you have any questions do not hesitate to ask -
HOW DO WE KNOW THAT THE RAM USED BY AN APPLICATION ON WINDOWS 8?
HOW DO WE KNOW THAT THE RAM USED BY AN APPLICATION ON WINDOWS 8?
RAVIKUMAR PI
Launch the Task Manager for more information on the memory usage.
How to use the new task manager in windows 8.
http://www.howtogeek.com/108742/how-to-use-the-new-task-manager-in-Windows-8/
-
ISE 1.3.0.876 high memory use
Hi team,
Kindly help me on our ISE Cisco version 1.3.0.876 that meets the high memory use. It has a HA configuration.
Primary school has 83% and secondary 63%.
Thanks in advance!
Kind regards
Mady
Tehreare some fixes in patches that resolve the problems associated with the use of memory
Last paych 1.3 patch 6 and included the following fix
CSCux53910: patch 1.3 ISE 5 augmented memory of lead for authentic latency
I recommend cosnidering install the latest patches
-
In addition, about half of my 8,000 e-mails are unread. Thus, the fact of having 4 000 unread emails in my mailbox Windows (Vista) slow down my computer more than if they were 4 000 read emails?
If so, is there a quick way to mark all read emails as read in Windows Mail (Vista)? .. .in windows Live Mail (Vista)?
Even if these unread e-mails degrade the speed, is there a quick way to mark all read emails as read in Windows Mail (Vista)?... .in windows Live Mail (Vista)?
I also regularly get an alert Norton of 'Use of disc high by Microsoft Windows Search Indexer.' Gravity is the next, and what can I do to fix the problem?
Finally, I have a lot of folders: would have 2,000 emails in the Inbox Windows (Vista) slow down a computer more than if 2 000 mails were one or more files? This change of response if the e-mail is unread vs bed?
#2: the Inbox is accessible by your computer whenever he asks new messages. The fact of having 1,000 messages in the Inbox slow it down? I have no personal experience, since I never have more than a dozen or messages in my Inbox, but it is so likely. If you have lots of free space on the hard disk, the messages would be better in another folder (s). Even if you create more WinMail's local folders and move messages to them.
I would also say this. Try to compact and repair the database.
WMUtil
http://www.oehelp.com/WMUtil/default.aspxIt can be very useful, and it can't hurt anything.
-
Scchose.exe use of the high ram and RAM ghost.
I recently updated my 12GB to 16GB ram then I noticed Svchost .exe raised usuage (389 848 KB) RAM, the process is bound to Wlansvc UxSms, TrkWks, SysMain, PcaSvc, Netman, hidserv, AudioEndpointBuilder. All with PID 1480.
Also the use of the ram in the task manager must be wrong, since the use of the ram is not were close to 55% of total ram installed (8 GB).
The system seems clean so scanned by McAfee and Windows Security Essentials.
Well actually, after I done things as checked all disks and reinstalled the MacAfee and a few other drivers. Use you RAM has improved somewhat (30% off), since there is not much question now and running while trying to save the settings actually used resources more CPU and RAM I wanted (can not play LoL and slow navigation on IE). So I guess for now I'll put that aside until I have again RAM RAM (16 GB is maximum, you can get on a laptop I think).
However I discovered that when I hit F8 and try to repair windows. It will slide in to bluescreen says unmountable_boot_volume... I guess I'm going to have to look into that one.
-
I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.
Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.
Thanks in advance
Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.
At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.
Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.
I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...
Luke
Maybe you are looking for
-
How to uninstall Norton AntiVirus of my EL Capitan iMac running?
The version of Norton Antivirus, I had before the update to EL Captian does not work with El Capitan, apparently. I want to uninstalled and you are using Symantec Endpoint Protection (which, by the way told me, works better than Norton). When I tried
-
How to transfer files from PC to PC via a serial port using labview
I need to transfer files (.txt, .doc, .xls) from PC to PC via a serial port using LabVIEW. Is it possible to transfer files, if so how to transfer?
-
Windows checks NO matter what publishers even from Microsoft.
I can not re - install Java and I get the error code 1330 or get windows cannot verify Publisher... this happens with everything I try to download and then run if I save the file, and then try to run it I get a msg saying that the file is damaged.
-
How can I get synaptic touch pad for windows 8?
my model is like 6 - 1002tx.running windows 8. I need driver for synaptic touch pad
-
Thin client based on Linux T610
Bulletin Board Hello! Just a few questions here I can't find via Google, manual and read other messages of the forum... We are trying to use a t610 with the Linux-based operating system and are facing obstacles, a little... I saw on the thin clients