Suddenly cannot print specific XL file due to the printer error

Similar Questions

• Photoshop does not save files due to the program error.

  I know what happens to many people, it seems. I tried everything I can. I can't save files that need to be done today. I'm going to record and photoshop says "cannot be done due to program error"

  have turned off the generator and graphics processing

  have you tried different text engine

  have uninstalled and reinstalled photoshop

  did a hard reset on all Pshop preferences...

  have restarted 476 times

  What can I do else? I can't find an update for the ATI Radeon HD 5770 video card I'm running, either. Please help

  Brett

  Thanks for the links c.pfaffenbichler. I ran through most of these things two and three times more. Last night, before giving up, I have reset the preferences with the keyboard (shift, option, command) command when Pshop starting... He has nothing. This morning, after you completely uninstall then reinstall Pshop, I advanced and open preferences Pshop file and drag on the pref.psp file. Restarted Pshop and managed to save the files I need to get out today. Why is the solution is beyond me.

  Upgrading my video card would help? This is the fourth or fifth catastrophic Photoshop problem I've had in the past months which has implemented a complete stand still...

• Cannot install Office Ultimate 2007 due to the editing error message

  Description of the problem: I have a desktop computer that I built from a kit of WGA (Windows XP Pro with Service Pack 2). This machine is an AMD based system and I had installed SP3 that caused a problem without end. I did a fresh install of XP and you have not installed SP3. This machine has everything installed at the origin of the office suites. I bought an Office 2007 Ultimate on m6mobile.fr store and tried to install it but always comes an error message: "Setup error: the language of this installation package is not supported by your system." I tried to install the software on a second DVD player, but I get the same error. I tried to install the software on my Sony Vaio laptop and it seems to install without any problem but I did not install, I just want to check if the software disk is defective. The laptop has XP Pro SP2 also. Any information or assistance be will greatly appreciate.

  I could solve this problem by copying the contents of the disc on my c drive, open the folder and clicking on Setup.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• I get an error saying "the BCM42RLY service failed to start due to the following error: the system cannot find the file specified. '.

  Log name: System
  Source: Service Control Manager
  Date: 17/07/2011-21:12:53
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: ivan-PC
  Description:
  The BCM42RLY service failed to start due to the following error:
  The system cannot find the specified file.
  The event XML:
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      203523
     
     
      System
      Ivan-PC
     
   
   
      BCM42RLY
      %%d Ko
   
  original title: can someone please help...

  Hello

  1. you are using a Dell computer?
  2. What is the model number of your computer?
  3. don't you make changes to your computer before the problem?

  BCM42RLY is a broadcom driver. I suggest that you uninstall and reinstall the drivers.

  Uninstall or reinstall a device

• Cannot open the file due to a header error Error Message.

  Hello

  If you're still trying to import an audio file (wav) in Adobe Premiere (or any other program) and get this error "Error Message.
  Cannot open the file due to a header error"

  Try to download this utility (found my copy Guide Fassoft Audio Converter of Tom.  I imported my wav file in the utility and then converted 'back' to another wav file in another folder.  And fixed it.

  There is a limit of 5 minutes on the trial version, but my audio file was less than 5 minutes, so it worked for me.

  I don't know that there are other similar utilities, so try any utility "Audio Converter" to see if it will fix your audio file.

  It worked for me.  Perhaps others have alternatives they would recommend.

  Rowby

  Hello

  I found a better (free!) utility to do this. (The free version of Fassoft Audio Converter has audio length limits).

  It is called MediaHuman Audio Converter and I found this site: http://www.mediahuman.com/audio-converter/welcome.html

  MediaHuman has worked on my windows 10 computer and does the work to 'fix' the question header error. Import the wav damaged and then exported to a new folder.

  Rowby

• Trouble with my email, I try all I get the following, windows update cannot download files due to the error 3048,3...

  original title: what is 3048,3

  I have a problem with my email and everything I try the update of windows I get the following, can not download files due to the error 3048,3... Thank you

  Hello

  ·         What mail client do you use?

  ·         Update you are trying to install?

  ·         What is the full error message that you receive?

  ·         What is the exact error message that you receive by email?

  I suggest to reset Windows Update components and check if it helps.

  See the Microsoft KB article below:

  http://support.Microsoft.com/kb/971058

• tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory (the installation failed)

  I tried to install VMWare Server for the past few hours now, but nothing helped. I use Ubuntu 8.10.

  I have already patched, had to move manually the files, and now I'm here:

  VMware

  VMware is installed, but it has not been configured (correctly)

  for this system. To (re-) set, invoke the following command:

  usr/bin/vmware-config.pl.

  root@xxxxxx-laptop: /usr/bin/vmware-config.pl

  Ensuring services for VMware Server are stopped.

  Stopping VMware services:

  Virtual machine monitor makes

  Networks bridged on/dev/vmnet0 made

  Server DHCP on/dev/vmnet1 did

  Guest network only on/dev/vmnet1 made

  Server DHCP on/dev/vmnet8 is

  NAT service on/dev/vmnet8 is

  Guest network only on/dev/vmnet8 is

  Virtual Ethernet is

  Configure libraries GTK + 2.4 relief.

  In which directory you want to install the mime type icons?

  use

  This directory contains your desktop menu input files? These files have a

  .desktop file extension. / usr/share/applications

  In which directory you want to install the application icon?

  pixmaps

  /usr/share/applications/VMware-Server.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path

  /usr/share/applications/VMware-console-URI-handler.desktop: warning: value ' vmware - server.png ' key 'Icon' in the group "Desktop Entry" is an icon of name with an extension, but there should be no extension as described in the icon theme specification if the value is not an absolute path

  Try to find a vmmon module suitable for your running kernel.

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)?

  Using compiler "/ usr/bin/gcc". Environment variable CC to override.

  What is the location of the directory of C header files that match your running

  kernel? /lib/modules/2.6.27-11-generic/build/include

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Building for VMware Server 1.0.0.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config4/vmmon-only '.

  do /lib/modules/2.6.27-11-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.27-11-generic'

  CC /tmp/vmware-config4/vmmon-only/linux/driver.o

  CC /tmp/vmware-config4/vmmon-only/linux/driverLog.o

  CC /tmp/vmware-config4/vmmon-only/linux/hostif.o

  /tmp/vmware-config4/vmmon-only/linux/hostif.c: in function 'HostIF_SetFastClockRate ':

  /tmp/vmware-config4/vmmon-only/linux/hostif.c:3441: warning: argument passing "send_sig" 2 rejects the characterization of target of pointer type

  CC /tmp/vmware-config4/vmmon-only/common/comport.o

  CC /tmp/vmware-config4/vmmon-only/common/cpuid.o

  CC /tmp/vmware-config4/vmmon-only/common/hash.o

  CC /tmp/vmware-config4/vmmon-only/common/memtrack.o

  CC /tmp/vmware-config4/vmmon-only/common/phystrack.o

  CC /tmp/vmware-config4/vmmon-only/common/task.o

  cc1plus: WARNING: command line option "- Werror - implicit-function-declaration" is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wdeclaration - apres-declaration "is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wno - pointer-sign "is valid for C/ObjC but not for C++

  cc1plus: WARNING: command line option ' - Wstrict - prototypes "are valid for Ada/C/ObjC but not for C++

  In file included from /tmp/vmware-config4/vmmon-only/common/task.c:1195:

  /tmp/vmware-config4/vmmon-only/common/task_compat.h: function ' void Task_Switch_V45 (VMDriver *, Vcpuid)':

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::validEIP' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::cs' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rsp' may be used uninitialized in this function

  /tmp/vmware-config4/vmmon-only/common/task_compat.h:2667: warning: 'sysenterState.SysenterStateV45::rip' may be used uninitialized in this function

  CC /tmp/vmware-config4/vmmon-only/common/vmciContext.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDatagram.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDriver.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciDs.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciGroup.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciHashtable.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciProcess.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciResource.o

  CC /tmp/vmware-config4/vmmon-only/common/vmciSharedMem.o

  CC /tmp/vmware-config4/vmmon-only/common/vmx86.o

  CC /tmp/vmware-config4/vmmon-only/vmcore/compat.o

  CC /tmp/vmware-config4/vmmon-only/vmcore/moduleloop.o

  LD /tmp/vmware-config4/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  WARNING: modpost: vmmon.ko module uses the marked "init_mm" symbol is not USED

  CC /tmp/vmware-config4/vmmon-only/vmmon.mod.o

  LD /tmp/vmware-config4/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.27-11-generic'

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/vmware-config4/vmmon-only '.

  The module loads perfectly in the kernel running.

  This program already created the file/dev/vmmon and was about to remove

  He someone else apparently already made.

  You have already setup network.

  You want to skip the network configuration and keep your old settings as they are?

  (yes/no)

  Extract the module vmnet sources.

  tar: /usr/lib/vmware/modules/source/vmnet.tar: cannot open: no such file or directory

  tar: error is not recoverable: leave now

  Unable to decompress the "/ usr/lib/vmware/modules/source/vmnet.tar" file in the

  directory ' / tmp/vmware-config4.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/download/modules/modules.html "and "

  " http://www.VMware.com/support/reference/Linux/prebuilt_modules_linux.html ". "

  The execution is canceled. [/ b]

  I know that vmnet.tar was here before... and he suddenly disappeared. How do we do it back, or can I download it somewhere? Thank you.

  A little worrying that this file should simply disappear - never happened on any of my guests. Check the logs, etc. for possible reasons. You get also warnings much more when you run vmware - config.pl I've ever encountered. What files did you manually have to move?

  If you download the tarball, extract the file from here and place it in the folder "/ usr/lib/vmware/modules/source", then you should probably go further. Should also be vmci.tar, vmnet.tar and vsock.tar in there.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

  I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

  You have Outlook open when you save? You need to close.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ORA-19838: cannot use this control file to open the database

  Dear all,

  While making RMAN cloning, we are facing problem,

  SQL > alter database open resetlogs;

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-19838: cannot use this control file to open the database

  Concerning

  Villi Kumar

  Dear all,

  While checking the database,

  Control the name of the database file is PROD

  In the instance, database name is TEST.

  So we took the PROD and edited control file trace file based on the TEST environment.

  Then run the script published in the TEST database trace file.

  Now we can open the database by using below command

  ALTER database open resetlogs;

  Concerning

  Villi Kumar

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  When I run pdf reader applications, I get this error:

  Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  Hello

  1. you remember to make changes to the computer before this problem?

  2 are you able to open files from other Adobe programs?

  Follow these methods.

  Method 1: The problem is that by default, when the PDF program is used as a COM object, then it cannot be activated by the following accounts:

  (a) a Director

  (b) system

  (c) interactive

  How to solve this problem is to change the DCOM settings for the Application'S object.

  Configure DCOM

  a. click Start, type run in the start search field.

  b. type DCOMCNFG , and then press OK. (This will load the "Component Services")

  c. navigate to Component Services, click computers, my computer, DCOM Config application PDF.

  d. right-click and select Properties.

  e. Select the Security tab.

  f. in "Launch and activate permissions" select personalise and press change.

  g. press the Add button to select the "Network Service" account

  f. click on the OK button, and then test your application, it should work fine now.

  Method 2: If this does not help, you can uninstall and reinstall Adobe reader software and check.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can download the latest version of Adobe reader from the following link.
  http://get.Adobe.com/reader/

• How to repair the CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.

  How I need to solve this problem? I didn't install on my desktop, no problem, but I install in my laptop this pop up when I run the software

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Runtime.InteropServices.COMException (0 x 80040154): recovery of the class factory COM for component with CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.
  at R2D2CtrlPanel.CSkypeMediator.ConnectToSkype)
  to R2D2CtrlPanel.CSkypeMediator... ctor()
  to R2D2CtrlPanel.R2D2Panel... ctor (img CImages, CRequiredVerifier & parent)
  at R2D2CtrlPanel.CRequiredVerifier.Timer_runOnce_Tick (Object sender, EventArgs e)
  to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
  at System.Windows.Forms.Timer.TimerNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  R2D2CtrlPanel
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) R2D2CtrlPanel.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5460 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5462 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  Interop.SKYPE4COMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Interop.SKYPE4COMLib.DLL
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Thank you

  Hello

  -When exactly you receive this error message?

  -What is the software you are trying to start?

  -Did you do changes on the computer before this problem?

  If the issue is with Visual Basic, it is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-IE/vsexpressvb/threads

  Hope this information helps.

• Get a connection error 421 4.4.2 dropped due to the socket error in exchange 2010

  We get an error while sending an e-mail to a particular connection 421 4.4.2 abandoned due to the socket error in exchange 2010

  Hi jussainkothari_412,

  Thanks for posting your question in the Microsoft answers Forum. Any questions on Exchange, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/