Suggestion of DR Plan

Similar Questions

• iCloud Legacy Plan

  I'm be renewed and I'm confused. renewal for legacy 25 GB $11.99 annual payment. New monthly 50 GB $0.99 per month. What's the catch? The monthly is an annual rate fixed. Suggestions on what plan I should renew with?

  No plug.

  Apple has simply gone from annual plan to a monthly plan that happens to work on a lot cheaper per month than before.

  You can keep your plan if you wish.

• I want to change my plan from student to the photographer

  I want to change my plan of student to the photographer with only lightrrom and photoshop, but it I don't suggest that comprehensive plan at $ 50 / month... How can I change my plan, what I have to give up everything and restart?

  Hi Steve,

  In order to change your plan, you will need to cancel the current subscription and subscribe on the other.

  Please contact customer service to cancel the subscription.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• recommend simple spreadsheet for macbook pro

  You want to create the worksheet Basic for the management and follow-up and analysis loads of family and spending.

  Never done before! Read and write basically only on e mail.

  Looking for a simple ready to use software?

  As you post the number for the Mac OS X forum, I suggest that you plan to use numbers that you can install on the App Store.  Figures has a personal budget template, I suggest that you only consider.  Then post here if you have any questions.

• How to make a wireless upgrade on Satellite P10 804 card

  I have a satellite P10 804 and it has a 802. 11B wireless card built (only part no PA3171U-1MPC). It's too slow to stream multimedia from my office. My router has capacity G + and I would like to update my wireless card to be somewhere near the same speed. The upgragdeable of cards is integrated (easily)? If so, is the PA3374U-1MPC card compatible? and how can I change?
  Thank you
  Shaun

  Hello

  Yes, surely. You can improve it, but you should not use original toshiba parts. You can enter a Wi - Fi card with the standard of g on ebay for example and install it yourself. the wireless LAN card must be placed on the bottom of your machine behind a cover that is fixed with a screw.

  I suggest, if you plan to buy a new one, take an atheros card because they are affordable, they are stable cards and chipsets quality is very good (send/receive/you connecting to a network) If you can´t do something wrong with an atheros chipset.

  Welcome them

• Can I download originals to iCloud for mac before move library of photos on external hard drive

  I moved my library of photos from my laptop on a thunderbolt 2 TB external drive. I opened pictures (option click) and chose this place to open. Then I opened the photos and click preferences on use this as library of photos of systems. I checked iCloud and he said that I had referenced files that could not be downloaded and consolidate them. I do not know which files are "referenced". These would be photos of the former library of iPhotos that was imported in the Photos. I have more than 20,000 pictures on iCloud. Will they all finally downloaded to my new library of pictures on the external hard drive? Or I have to download the originals on my mac before moving the library of photos on the external drive. I maybe need all start over and do it - except that I don't have enough space on my drive SSD from Mac to keep them all.

  Any suggestions? My plan was to have my photos on iCloud, the originals on disk external hard and then the mac and HD on my time capsule. Access iCloud on my iPad photos air and iPhones, iPad pro.

  When I look at the size of the library of photos in my pictures folder, it is about 12 GB - there is also an iPhotos library in the images folder which is 63 GB. I think I have to combine these files but don't know how to do this. If I also moves the iPhotos library to the new external hard drive which will be done automatically. Obviously I have not deleted the folders in the library on my Mac until it works.

  They must synchronize the external disk if it's where you said Photos your library is (that you have).

  Try to create a new smart album to see what is not downloaded.

  

  iPhoto for pictures

  iPhoto Library from iPhoto to picture for Mac

• error 1073807346

  Good day to all.

  My model of signal generator (E4432B) is a GSS - D series. I had downloaded the driver concerned and I was exploring the examples given. However whenever I run the .vi program, there will be an error message invites me as shown in the picture as an attachment.

  I had read through the forum messages from various sources and suggestions of first plan was to install the driver VISA. I did, but the same error still appears. Where can I ask what are the things I can always fail?

  In addition, if it's something to do with MAX, may I know the procedure step by step on how to do it as I am new to it.

  It's the attached program: "Agilent ESG series Signal FM Config '.

  Kind regards.

  On the front panel is a VISA, the name of the resource control. On the right side is a small arrow. Click on it. You should see a list of resources. You did not mention one important detail - the connection type. Your instrument should be listed in MAX before that you can select.

• Pavilion p6-2070sc: the upgrade of processor on a p6-2070sc

  According to the page of specifications of product for my Pavilion p6 2070sc (), I can upgrade the processor.

  I have 3 questions then:

  1: if I want to switch to an i7 processor, this one would agree: http://www.proshop.dk/CPU/Intel-Core-i7-2600-Sandy-Bridge-Tray-2287663.html

  2: can I do the upgrade myself?

  3: can I also buy this thermal grease: http://www.proshop.dk/Systemtilbehoer-(koelepasta-mv.) /Danamics-Koelepasta-1%2C5-Gram-2253904.html

  Thank you for your help,

  Carsten.

  Hello

  I don't plan on specific issues.  You will need to reuse the existing heatsink.

  Review a couple of uTube videos of Intel i7-2600 installation so that you get the feel of what you need to do.

  I suggest that you plan to install latest BIOS update for your PC and your PC stable before you proceed with the replacement of the processor.  It could not hurt to run diagnostics to make sure that your PC hardware is stable.

  If you experience problems after installing, then try to clear the CMOS memory.

• Calendar in XP Defragmenter

  I don't know there is a way to automatically schedule disk defragmentation in Windows XP, SP3.  I tried to use Task Scheduler, but not able to find the "program" to assign to the defragmentation.  There must be documentation on this somewhere?

  Mike,

  Go to control panel > administrative tools > Computer Management (Shortcut). Storage > Disk Defragmenter.

  However, I am not suggesting that you plan to automativically run. Your C: drive player needs 15% free space to run. I tried to run this week and I don't have enough space treatment. Instead, I'm trying to delete files on my C: drive recovery because I keep all documents on an external drive.

  Katherine

• WRT54GL: Fast cable internet connection; very slow wireless

  I have been chasing a problem for months and I am at the end of my mind.

  I started with a cable modem Motorola SB5101 and Buffalo bison wrt-hp-g54.  For years, we had a (intermittent) desperately slow wireless connectivity.  Recently I started to run through Speakeasy.NET speed tests to try to find a motive.

  Wire speed is consistently running 15-16 Mbit/s, compatible with the speed promised our cable package.

  Wireless speeds were a different matter.  From multiple computers, they would sometimes as soon as the wire speed; then all of a sudden (from all wireless computers) the speed would fall to 0.5 Mbit/s or less, then the speed measured on our single wired computer remained at 15 Mbps.

  Restart the router would mitigate the problem for a while, and then the wireless would fall up to 0.5 Mbps.

  Wire speed would remain stable at the nominal 15 Mbit/s.

  Well, looked like a bad router.  I replaced it with a WRT54GL hardware version 1.1.  I've updated the firmware to the last - v4.30.16.

  I selected a channel (2) wireless network what inSSIDer 3 watch is not used by any neighboring router (i.e., no interference).  I have that checked regularly and am sure that interference is not the problem.  The router is configured for the wireless G only; WPA - AES.

  The same problem occurs with the new Linksys router.

  In desperation I replaced the old modem SB5101 with a new SB6141 cable, not believing there could be everything possible that could help but, this what the devil - we will eliminate it as a factor as possible and go to DOCSIS 2.0 to DOCSIS 3.0.

  The problem persists.

  Thus, new router, cable modem brand new, constant wire-speed, without strong signals wireless, channel interference all around. but the problem persists. There has been no improvement on the old hardware I used.

  All computers, but a (XP Pro) is running Windows 7 Pro.

  The problem is not predictable, except that the speed degradation will happen sooner or later - and this is not progressive.  Suddenly, he fell like a stone and sticks to 0.4 to 0.5 Mbits/sec.  Reboot the router (usually) will fix it for a while, and sometimes it will clear up on its own, given enough time.

  I ran inSSIDer several times while this is happening, but he sees no other no signal on the channel I use--in fact, none on adjacent channels either.

  I checked from wireless to the router table and there is no other than our device, so it does not appear that the network has been hacked.

  Does anyone have an idea what might be going on or suggest an action plan?

  The only thing I can think is that there is something between the router and the computers wireless in the House which is eating up 95% of the bandwidth wireless - a sort of voting out of control.  But what?  I'm completely stuck.

  Follow-up.  I changed the channel 1 wireless; After doing some research I realized that sharing a channel (as long as your signal is at least 20 dB louder) causes fewer conflicts overlapping channels.  I have not changed anything else.  I'm tempted to allow the break-up of the frame but implementation of that seems to be somewhat specific to the supplier so I'll let it be.  In any event the wireless speed now as fast as the wire speed.

  The result is that since the re - install the Linksys firmware and do a hard reset that I saw not a single instance of the speed problem.  So I still don't know exactly what caused in the first place, but I'm glad that the problem has disappeared, so I'll just let things be.

  Thank you!

• Moniter turns black when you are working on computer

  I have an Acer Extensa 5420 running Vista Home Premium 32 bit and the screen will turn black in itself.  It of like when you press Fn + F6 to turn off the moniter.  However, I don't have to restart the computer to recover the moniter on, I can press Fn + F6 and move the mouse and it turns on.  I updated the driver, which is an ATI Radeon Xpress 1250 and which does not seem to solve the problem.  I ran a diagnostics of memory who reported no errors.  I contacted Acer and they suggested updating the driver that I've had and they said to do a factory restore.  I did not restore the factory, but because I really hate to do that if there is a simple solution to my problem.  I realize there are similar to this positions, but none like well my problem that I could find.  If anyone has any suggestions or responses they would be greatly appreciated.

  Imzadi75

  Hi Imzadi75,
   
  1. doesn't this problem occurs when you work with a particular program or application?
  2. Since when are you facing this problem?
  3. any recent change in software/hardware on your computer?
  4. doesn't this problem occurs when the monitor is inactive for a long time?
       
  Method 1:

  First of all I suggest you to turn off the graphics card on your computer and check if the problem persists, the problem does not happen, you need to contact your display adapter manufacuturer for the updated drivers or replace the unit.

  You must be logged on as administrator to perform these steps.
     

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the Device Manager, find the device and then right click on the device name.
  c. Select disables the device.
         
  Method 2:
   
  That the monitor lights up when the mouse moves, I suggest delete all plans power on your computer and check if the problem is resolved.
   
  Reference:
   
  
  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme
   
  See also:
   
  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions
   
  Method 2:
   
  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.
   
  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  Now search for the question.
   
  Follow the link provided below to fix the damaged user profile.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
   
  Method 3:
   
  I suggest you go the notch of hardware acceleration to none (the Basic acceleration setting) and check if the problem is resolved, follow the steps below:
   
  a. Click Start, type display settings in the search box and then click on display settings in the list programs.
  b. click on the settings tab and then click Advanced.
  c. click the Troubleshooting tab and move the notch of the slider hardware acceleration to none (the Basic acceleration setting).
  d. click OK and then click Close.
  e. If you are prompted to restart the computer, click Yes.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How do we install silvering on the hp touchpad of wells

  Unable to install silverlight on my touchpad HP webOS... HELP PLEASE!

  Hello and welcome to the HP support community!

  Joseph wrote:

  Unable to install silverlight on my touchpad HP webOS... HELP PLEASE!

  Sorry, Silverlight is not for webOS - it can not be installed.

  I suggest that you plan to install Android in order to get the best ability!

  WyreNut

• How will I know my administrator password?

  Hello, my husband needs to install some software manufacturer, Sat - Nav and it asks the administrator password.  I do not remember what it is and have tried all the other more obvious.  How can I retrieve or reset my Admin password please?

  When you have loaded Windows for the first time you have been prompted for the name of an account and a password. This account was created as an administrator account. This is the account that you now use.

  I also suggest that you plan ahead a little by creating, testing and documenting an alternative admin account, even though you have a spare House key. This will save you a lot of trouble. Relying on your memory is clearly insufficient.

• Print issues with old photos scanned .jpeg prints too large & can't print in black & white

  I have a bunch of old photos & scanned articles of a scanner flat of maybe 10 years ago or not.   These are all .jpeg files.

  First of all, when I print on the Windows Live Photo Gallery, they are all print in color, no matter if I change my printer settings or if I go in settings in Windows Live Photo Gallery and deselect color.

  Secondly, not printing in black & white, they all print out extra large and therefore do not fit on an 8 1/2 x 11 pages.  All this elements analysed in years were roughly between 3 "x 5" until maybe 8 'x 10'. "  The fact is that they don't print as I would like.

  One last question, is that I have a newspaper article large .pdf format.  I printed it weeks and had no point of color above.  But I printed this on paper 11 "x 17".pdf file.  She printed on the entire page, but it was stopped at the bottom of each printed page, and I don't understand why.  Which certainly confused me.  Any suggestions?  My plan was to save the pages together to view the log what it was.  It's pages of the newspaper of 1886.

  Thank you

  Sue

  Hi Sue,

  We apologize for the delay in response.

  This problem occurs with the printer settings.

  I wish that you run the printer Troubleshooter and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Note: He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If the problem persists, please refer to the article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please answer with the number of the printer model to verify if there is no known issue.

  Thank you.

• Can I subscribe to two simple applications in creative cloud rather than getting the entire suite?

  I have a subscription for first, already, but really just need an extra subscription for Photoshop. I can subscribe to two apps? I'm thinking that might save me $10 a month, rather than getting the CC range.

  Yes, you can.

  I suggest with the Plan of photography for $10 / month. You do not have to use Lightroom.

  Then it will be $30 / month (first + photography Plan) instead of 50 $par month for all applications.

  Check the differences between the Plan of photography and unique App below to see which meets your needs

  Using Photoshop | Differences between Photoshop and creative photography programs Cloud

  * The "Plan Photography Photoshop", mentioned in this link is a discontinued product