Suggestion to facilitate debugging of problems Add on

Similar Questions

• Suggestion BOX for first Pro! Add your suggestions. you want to see in CS 6.5 or CS7

  1. I would be grateful if you can import and attach files like in avid media compose.

  Sometimes we work on projects of greater and different computers, but if I open the project on another computer I have to recreate a link to the files, which is sometimes very annoying and sometimes I take my work home, but can't because the files are placed on different servers/sites I just can access the work. Thus, the importation of 'real' would be very useful.

  2. you should also be able to have the opportunity to structure your project as in avid media compose.

  
  If you create a new project, you need just a place/place where your files are stored as the Avid MediaFiles folder.

  3. on the display of the list - it should be possible to sort of assets, and in the project window, the icons are still at large (even if you are already chosen the smallest)

  4 speed/duration - it should be possible not only to adjust the % would be nice, also adjust the frame rate.

  for example, you have a project/clip with 25/24 fps. and you want to play at 24 / 25 fps without jump/interpolation of frames.  Also when you return the it, it should be possible to choose this option (with the information that the clip will be played more slow or faster, depends on what you want), it's just like you should accelerate or slow down the indicator in the timeline panel.

  5. is it already possible to choose a window via keyboard?

  
  If the source monitor Panel is enabled and I want to activate the timeline, can I do this without using the mouse, as (alt + F4)?   Jump between the source-project monitor, the window of the project, the timeline...  This would increase my SPEED work also if you in the source monitor and want to jump in the effects Panel should be possible without a mouse (tab).

  6. If you are already working on a project and you acknowledge that you have the settings wrong audio track it would be possible to change from mono to stereo and stereo to mono.

  7. multicam

  
  If you have configured a session with numerous Multicam (and/or) large files, it would be nice if you could do a right click on it and choose something like - convert achievable quality (proxies) - (also the size of the video for example 720 p to 360 p should shrink) (option box where you can adjust the quality/size and also suggest what pro first) because in many cases must be converted manually and these are a few extra steps you need to do, what I think is not necessary. When you are finished with the installation you need to right click again and choose - replace it with the original of the files - or something like that.
  MODE MULTICAM editing is sometimes still a pain. We want to change sometimes in Multicam - monitor, but whenever I have stop recording and press play and I want to just change the camera, I get a new installation I don't want (and rec automatically turns the) then when th rec is on and I'll frame and click in the multicam monitor on the camera I want to It does not add an editing tool. This is so weird and multicam makes uneasy work.

  I am really interested, what are your ideas and maybe adobe chooses some of them (hopefully) to improve the first pro.

  1. use Project Manager to collect your files in a new directory.

  2. have all your files on a disc is not normally a very effective way to edit. It is best to keep things on various drives on your PC.

  3 a. agreed. Put in a request to sort icon mode feature. https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  4 create a new sequence by using the rate you want to use and copy and paste your videos in the new sequence.

  5. There is of the hotkeys to switch between the panels. SHIFT - 1, Shift 2, shift - 3 etc.

  6. sorry, but I don't understand this one. The audio tracks are automated in CS6. Drop the audio, and you get a track that matches.

  7. I do not use a lot of Multicam, but since I was a fast RAID I don't have reading problems that require proxy. I hope someone else can handle this for you.

• Got the following error please suggest ways to solve this problem, thank you.

  I have Windows vista home basic version and received the following error message. Not able to install new programs so lately. Apart from that if I right click and try try to customize it would not allow me to... file opens and closes by itself!

  Product Windows® installation problem stopped working

  Problem event name: BEX application
  Fault Module name: MsiHnd.dll
  Fault Module Version: 4.0.6001.18000

  Hi RamakrishnanS_1080,

  ·         Have you made changes on the computer before this problem?

  I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Method 2: To the question to customize, follow the steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• my PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? that solve my problem

  Now PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? How to protect my pc and solve my problem and frequntly turn off my pc what I would do now?

  Hello

  When exactly do you get this error message?

  Perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/310353

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Director of the UCS, problem add UCS C-series

  Hello

  I have problem with UCS Manager 5.0, ocurr of problem when you add the server UCS C200 M3, the error is as follows, the MMIC version is 2.0 (3d).

  print_ucs.PNG

  

  connectivity issues are rejected as UCS UCS Director & MMIC are in the same network, have been tested with different servers for the same problem.

  Thank you!

  Hi,Cristobal

  Take a look at the compatibility table for Cisco UCS Manager, version 5.0

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/UCS-Director/...

  It is said that UCSD supports MMIC from 1.4 to 1.5.

  So, try to level UCSD 5.2 or 5.3.

• Problems add VPN PIX515 2nd

  I'm running a pix to pix VPN of NYC in Chiba in Japan without any problem. I need to add a 2nd VPN to pix even in New York to a pix no VPN in Frankfurt in Germany that does not work.

  Ben, I have provided the following information to Germany:

  IKE:

  Encryption: AES 256 bit

  Auth. ALGOR. : SHA1 160 bits

  IKE Diffie-Hellman group: DH group 5 (MODP1536)

  SA life duration: 3600

  IPSec settings:

  Encryption: AES 256 bit

  Auth. ALGOR. : SHA1 160 bits

  IKE Diffie-Hellman group: DH group 5 (MODP1536)

  SA life duration: 3600

  Transform-set esp - aes 256 esp-sha-hmac

  shared before key *.

  Below my setup with the additions for the VPN of the Germany is indented. I am not able to connect to the Germany and I seem to lose my connection Chiba sometimes.

  :

  6.3 (1) version PIX

  interface ethernet0 100full

  interface ethernet1 100full

  Auto interface ethernet2

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 intf2 interieure4

  hostname pix

  domain pix

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  names of

  access-list 101 permit ip 10.10.10.0 255.255.255.0 10.10.40.0 255.255.255.0

  access-list 101 permit ip 10.10.20.0 255.255.255.0 10.10.40.0.0 255.255.255.0

  access-list 101 permit ip 10.10.30.0 255.255.255.0 10.10.40.0 255.255.255.0

  -access-list 101 permit ip 10.10.10.0 255.255.255.0 10.10.50.0 255.255.255.0

  pager lines 24

  Outside 1500 MTU

  Within 1500 MTU

  intf2 MTU 1500

  IP outdoor 200.200.200.130 255.255.255.240

  IP address inside 10.10.10.254 255.255.255.0

  No intf2 ip address

  alarm action IP verification of information

  alarm action attack IP audit

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  allow icmp a conduit

  Route outside 0.0.0.0 0.0.0.0 200.200.200.130 1

  Route inside 10.10.20.0 255.255.255.0 10.10.10.1 1

  Route inside 10.10.30.0 255.255.255.0 10.10.10.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set esp - esp-md5-hmac chiba

  -crypto ipsec transform-set esp-aes-256, hmac-sha-esp Frankfurt

  MYmap 1 ipsec-isakmp crypto map

  correspondence address 1 card crypto mymap 101

  card crypto mymap 1 set peer 60.40.60.30

  card crypto mymap 1 set of transformation-chiba

  -map mymap 5 ipsec-isakmp crypto

  -correspondence address card crypto mymap 5 101

  -map mymap crypto 5 peers set 62.80.90.80

  -map mymap crypto 5 value transform-set Frankfurt

  mymap outside crypto map interface

  ISAKMP allows outside

  ISAKMP key * address 60.40.60.30 netmask 255.255.255.255

  ISAKMP - key * address 62.80.90.80 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 1

  of ISAKMP policy 1 encryption

  ISAKMP policy 1 md5 hash

  1 1 ISAKMP policy group

  ISAKMP policy 1 lifetime 1000

  -share of pre authentication isakmp policy 5

  -isakmp strategy 5 aes-256 encryption

  -isakmp strategy 5 sha hash

  -Group politics 5 isakmp 5

  -isakmp duration strategy of life 5-3600

  Having only one access list 101 for specify encrypted at both sites traffic is incorrect. Cryptographic cards are read from top to bottom, so "crypto mymap map 1" (the tunnel in Chiba) is always going to read everything first. This tunnel specifies the new traffic to Frankfurt, Chiba because that's what you said the PIX is actually subcutaneous traffic you want to go to Frankfurt. You must divide your crypto access lists at both sites with the following text:

  MYmap 5 ipsec-isakmp crypto map

  correspondence address card crypto mymap 5 102

  card crypto mymap 5 peers set 62.80.90.80

  card crypto mymap 5 game of transformation-Frankfurt

  access-list 102 permit ip 10.10.10.0 255.255.255.0 10.10.50.0 255.255.255.0

  However, you must also make sure now that the TWO ACL 101 and 102 are not THAT NAT would have, currently only ACL 101 is specified in your command "nat 0 access-list. Since you cannot specify several "nat 0 access-list" commands per interface, you must define a completely new ACLs that includes 101 and 102 and then set the "nat 0" on this subject, something like:

  access-list ip 10.10.10.0 sheep allow 255.255.255.0 10.10.40.0 255.255.255.0

  IP 10.10.20.0 allow Access-list sheep 255.255.255.0 10.10.40.0.0 255.255.255.0

  IP 10.10.30.0 allow Access-list sheep 255.255.255.0 10.10.40.0 255.255.255.0

  access-list ip 10.10.10.0 sheep allow 255.255.255.0 10.10.50.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  Who should you get, or at least get the process of construction of tunnel passes, you will have to wait and see if all the options that you specified are actually correct (they seem very well).

• Auch problem add during Installation?

  ICH habe heute die CC 2015 installed weil Sie als Zugabe zu einer gekauften Canon Kamera kam. I had nicht gedacht das ich ins so fat cell Greifensee wurde. Supplement Suite die habe ich mir von Topaz so wie auch die TKPanel V4 CC Version. Keine dieser Add ons lassen sich installieren. Ein Kontakt mit dem expressed result das alle Installationsprobleme bei den zu Userhelpdesk add on Hersteller liegen. Nun nach unzahligen Neu - und uminstallationen habe ich auf das herausgefunden Google dies wohl eher ein Adobe problem denn ein Add on Hersteller problem ist da mit der Version 2014 CC die noch gelafen sind Add-ons.

  Yesterday die Anmerkungen von Topaz Labs:

  Adobe Photoshop CC 2015 (Mac Version) Plugin Bug:

  We have identified a bug in the latest version (July 2015) of the PS CC 2015 causing Topaz Labs plugins do not run.  After in-depth investigation, it seems that the reason that our software does not start is Photoshop fails to launch the 6th entry in the menu filters 3rd party.  We were able to reproduce the bug and resolved that in order to get our plugins to work, you need to move us in the slot 5 or higher, or the 7th slot or lower to be able to operate.  You can do it by adding or removing plugins.  There is no way to rearrange the menu manually.

  
  

  WER kann helfen oder hat eine idea?

  
  

  Bernhard
  

  Install and use CC 2014

• Problem - add in plugin PowerShell PowerShell host

  Hello world.

  I want to run PS scripts locally on a host of the vCO.

  I have installed the components on it:

  1 WS 2008 R2

  2 vCO V5.1.0 build 2725

  3 PowerShell plugin V1.0.1

  4 WinRM V2.0

  5 PowerShell V2.0

  I configured WinRM by this command as an administrator:

  WinRM quickconfig

  WinRM set winrm/config/service/authentication @{basic = "true"}

  WinRM set winrm/config/service @{AllowUnencrypted = 'true'}

  WinRM set winrm/config/service/authentication @{basic = "true"}

  WinRM set winrm/config/client @{AllowUnencrypted = 'true'}

  WinRM set winrm/config/client @{TrustedHosts = "vco_host"}

  WinRM get winrm/config

  Config

  MaxEnvelopeSizekb = 150

  MaxTimeoutms 60000 =

  MaxBatchItems 32000 =

  MaxProviderRequests 4294967295 =

  Customer

  NetworkDelayms = 5000

  URLPrefix = wsman

  AllowUnencrypted = true

  AUTH

  Base = true

  Digest = true

  Kerberos = true

  Negotiate = true

  Certificate = true

  CredSSP = false

  DefaultPorts

  HTTP = 5985

  HTTPS = 5986

  TrustedHosts = 127.0.0.1, vco_host

  Service

  RootSDDL = O:NSG:BAD:P(A;;) GA; S:P(ALE;FA;GA;;;) (BA) WD) (AU; SA; GWGX; WD)

  MaxConcurrentOperations = 4294967295

  MaxConcurrentOperationsPerUser = 15

  EnumerationTimeoutms = 60000

  MaxConnections = 25

  MaxPacketRetrievalTimeSeconds = 120

  AllowUnencrypted = true

  AUTH

  Base = true

  Kerberos = true

  Negotiate = true

  Certificate = false

  CredSSP = false

  CbtHardeningLevel = relaxed

  DefaultPorts

  HTTP = 5985

  HTTPS = 5986

  IPv4Filter = *.

  IPv6Filter = *.

  EnableCompatibilityHttpListener = false

  EnableCompatibilityHttpsListener = false

  CertificateThumbprint

  WinRS

  AllowRemoteShellAccess = true

  IdleTimeout = 180000

  MaxConcurrentUsers = 5

  MaxShellRunTime = 2147483647

  MaxProcessesPerShell = 15

  MaxMemoryPerShellMB = 150

  MaxShellsPerUser = 5

  
  

  But when I want to add PowerShell host in PowerShell plugin I didn't do good. Nothing in the newspaper.

  I used HTTP, 5985, shared session and user session basis.

  Can someone help me please?

  Thank you.

  micy01

  Your log says: "Unable to load library 'vix'" - done-a you try to install the VERY OLD, obsolete plugin VIX on this host? If so, which causes all sorts of problems.

  1 it requires a basis of vCO Windows Server.

  2 If the initial configuration workflow is not running, it screws the other workflows

  3 If the library files are not unpacked in the correct on the vCO Windows Server folder, random questions appear throughout many parts of the vCO.

  It seems that you have:

  2013-10-23 15:40:27.219 + 0200 WARN [WorkflowHandler] error in the execution of the workflow 'add a PowerShell host '.

  java.lang.UnsatisfiedLinkError: cannot load library 'vix': Uvedeny modul nebyl nalezen.

  2013-10-23 16:46:49.511 + 0200 [performance] execution of workflow INFO ' copy to get virtual computers by name.

  2013-10-23 16:46:49.713 + 0200 WARN [WorkflowHandler] error in the execution of the workflow "copy to get the virtual computers by name.

  java.lang.NoClassDefFoundError: has not been initialized class com.vmware.vmo.plugin.vix.VixServer

  Remove the plugin VIX on your server and restart the Server Service of vCO. Your problems should go away

  Uninstall a plug-in for VMware vCenter Orchestrator

• Problems, add pages in InDesign CS3 ME

  Hebrew-oriented documents (from right to left):

  When I add pages or spreads manually or by inserting.

  All spreads after page 1 go to the far right of the timeline.

  This makes my practically useless file (unless I "Undo")

  I have found no one else with this bug.

  In English documents oriented:

  'Sometimes', adding pages in all places (except the end)

  the mount top and bottom table greatly increase the causes.

  Setting the size of cardboard in prefs does nothing.

  My colleagues have this problem as well.

  I've spilled my prefs. - no help.

  Very strange!

  Export to inx that he not repaired. -What helps on your installation?

  This happens with all documents?

  Substances

• Problems, add music

  IM pretty new to edit with Premiere, I have the Premiere Pro CS4. My problem is when I add background music in my project, it gets rid of the audio, video clips already in the project. How can I prevent that to happen?

  Well done to PrPro 2.0, this will give you a good idea of the Audio tracks and their headers. Note the empty track, which has been added at the bottom of the stack, just above the Master track.

  

  Hope this helps, and good luck,

  Hunt

• debug player problem

  When debugging I wonder, ' where is the debugger or host application race?
  I select the Local host, as I am not on a network with another machine.
  I get the error message "connection to the debugger or profiler could not be established by Adobe Flash Player 9.
  
  I tried to uninstall and install the latest debug player.
  
  What to do next?
  

  First of all, I have seen adobe suggests that remove you / uninstall all previous installations of flash player. I noticed several installs hang out after all my re - install different versions, which gave me a little complicated, but after removing a senior player and a debug version incorrect that I rebooted, went back in and uninstalled the stubborn player very well. restarted again, then installed the latest version of debugging to... http://www.Adobe.com/support/flashplayer/downloads.html
  But for me, the ultimate obstacle to configure my firewall. A step, I came on during a re-installation of Flex Builder, after I restored my system.
  I'm more of a designer to actionscript I am a developer so I I learn along the way, but from what I can understand, when I have to asked me "where is the host application or the debugger running?", he asked because I had disabled the connection by block it with Norton. All the pieces were in place, just badly configured.
  I think that I get blocked the necessary connection of my local host to my reader/IE7.
  Since the re - install and choose allow connections, I was fine.

  Hope that helps.

• Dear Sir, problem add-on with Erail.in. not showing is not available after the download places

  Mr President.
  I want to check the availability of the train in Erail.in seat but fail. It asks me to download the module and I did. But still the same problem and I am not able to do.

  kindly tell me process to check it out.

  Kind regards

  Laxmikant

  Try this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/Erail-plugin-for-Firefox/

• The device debug the problem

  Hi all

  I create a project of JDE in Blackberry Java plug-in forEclipse v1.5 6.0.0.

  and debug on my BOLD 9700 OS: v6.0.0.668 device after he signed.

  During the phone displays "Debugger is attached,"

  the pop Eclipse the error console:

  "Debug information are missing. Not all applications can be debogables. "Please make sure that you have installed the Simulator package that matches the handheld ID join to debug" and show much "no debug not found for... information. ».

  The app I have deployed the answer nothing when I type, when I clicked on ok to this error.

  How to launch the application successfully?

  Thank you

  Whenever I get this message, I clean/recompile the project, restart the Simulator and everything works normally after that.

• Windows Media Player 12 problems add music

  I have just upgraded to Windows 7 Ultimate from Vista Ultimate. I have all my music on a 1 TB Western Digital Carver Green, my Media Player. Now when I try to manage my media in Media Player, when I try to add files or anything, after I click on organize > libraries > music >, there is no response has no effect, no action. When I click on the video or something else, it allows me to peak records and all the rest that I need to do. But it doesn't add is not the media to the library. I don't know what to do I tried everything I can think of. I can go into the folders where my media is stored and click on a file and read it through media player in this way, but still no library to use... what to do, I do, it was a mistake to buy windows 7, so far I disappointed by this bean because all I have is not yet compatible with 7, and he has already planted 12 times in 1 week I got it for now, but the media play, what I'm doing, media player 12 is no good! 1

  Uninstall and reinstall WMP12.

  To uninstall,

  Click Start > type appwiz.cpl > select or turn off Windows features turn on

  "Multimedia functions" UNCHECK Windows Media Player.

  Restart the computer. This uninstalls WMP12.

  After the reboot,.

  Click Start > type appwiz.cpl > select features turn on or off Windows
  
  "Multimedia functions" CONTROL Windows Media Player.

  Turn it back on.

  It would reinstall WMP12.

  Let us know what happens!

  See you soon! In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• First Pro Debug event problem [NEED HELP]

  Hello guys and guys, Hello staff!

  For a few hours, I have a huge problem from first pro cc 2014!

  

  Since the beginning, that I'm not able to load an existing one or start a new project, which is very annoying, because I'm a youtuber and I need to edit videos to download. Now, I have to pause until the issue is resolved.

  Thank you very much for your help!

  Best regards

  Kevin

  It seems that you do not have this file:

  Workaround Remove the folder effect presets and Custom Items.prfpset of Documents\Adobe\Premiere Pro\8.0\Profile-CreativeCloud (or user name) - folder.