Error in the application of planning to open in the workspace

Similar Questions

• Error in the workspace when the client attempts to launch an application

  I get the following error when you try to run an application in the workspace.

  Error

  Application manager has encountered an error.
  Please contact customer service and provide the information shown below.

  Message Failed to get the configuration of the application.

  Error code 80180

  Server 127.0.0.1

  Timestamp Fri Apr 05 09:59:58 CDT 2013

  I created this guide for Horizon Application Manager 1.5. It's basically all the same, with the exception of the Horizon Workspace 1.0 replace the Service-goes with the bridge - goes to the place.

• The button "open in Smartview" error in the workspace for a user

  Hello

  One of our users is facing a problem while trying to open the data forms in Smartview via the workspace by using the option "open in Smartview. When you click on it it gives the following error: "the address is not valid."

  FYI - just to make sure I tried the same thing on another system with a different user name, and it seems to work correctly for the user and the system.

  It looks like an option or setting is not right or was messed up. Can you get it someone please let me know what setting/option could be the cause of this error and how to fix it.

  Future prospects for entries...

  You can connect to My Oracle Support Site and search for document id in the knowledge base search box. BTW, here's what you can do:

  1. uninstall Smart View
  2. Select START-> RUN
  3. type regedit
  4. go to HKEY_LOCAL_USERS\\software\HyperionSolutions\SmartView
  5 remove the Smart View key.
  6. close regedit.
  7 install Smart View

  Also, did you use are secure https protocol? In the options of IE, try to activate "Display mixed content" and see if that helps.

  See you soon... !!

  Rahul S.

• The option "open in Smartview" error in the workspace for a user

  Hello
  
  One of our users is facing a problem while trying to open the data forms in Smartview via the workspace by using the option "open in Smartview. When you click on it it gives the following error: "Navigation to the webpage cancelled.
  
  FYI - just to make sure I tried the same thing on another system with a different user name, and it seems to work correctly for the user and the system.
  
  It looks like an option or setting is not right or was messed up. Can you get it someone please let me know what setting/option could be the cause of this error and how to fix it.
  
  Future prospects for entries...
  -Krrish

  -Update

  Among the Internet Explorer settings have been updated (Internet Options - Security - "Enable Protected Mode" has been disabled) and also some JAVA related stuff installed on the system to solve this problem. The user is now able to open the dataform in SmartView via the workspace.

  Thank you
  -Krrish

• Error of the workspace when configuring ThinApp

  I get an error when you configure the network share for ThinApp for Horizon Workspace (2.0). The error is: "packaged applications configuration error: RepoUpdateRegistry() failed with the error: ERROR_GEN_FAILURE.

  I deleted the connector from the field and added it and I checked that there is full access to all users on this share. I added to the view of the Horizon without any problem.

  In addition, something weird is if I select 'Save' once again after receiving this error, it is said that the registration was successful, but not synchronize all application files.

  Any help is appreciated. Thank you!

  

  Ravi, stressed me VMware KB: activation for Horizon a virtual VMware ThinApp application previously packed without restoring links , in which I have advanced and recreated packages ThinApp making sure to select the option "manage with the Horizon. And BINGO, it worked.

  The journal entries that delighted that KB have been:

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: initialization of the discovery of application sharing

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Discovery actions of Application initialization succeeded

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Error importing thinapp package (Araxis Merge v6.5). No AppID found - not a compatible application Horizon.

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: RepoHZNUploadThinAppMetaData failed, app is 'Araxis Merge v6.5.exe', code HZN = 400 (HZN_BAD_REQUEST)

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: cannot download the package [Araxis Merge v6.5.exe]. Error code: 400 (ERROR_THREAD_MODE_ALREADY_BACKGROUND)

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Error importing thinapp package (Araxis Merge v6.5). Error code: 400 (ERROR_THREAD_MODE_ALREADY_BACKGROUND)

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Error importing thinapp (Chrome1) package. No AppID found - not a compatible application Horizon.

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Error importing thinapp (Chrome1) package. No AppID found - not a compatible application Horizon.

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: RepoHZNUploadThinAppMetaData failed, app = "Google Chrome.dat", code HZN = 400 (HZN_BAD_REQUEST)

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: cannot download the [Google Chrome.dat] package. Error code: 400 (ERROR_THREAD_MODE_ALREADY_BACKGROUND)

  2014 08-21 T 12: 57:59 - 06:00 connector - g ThinAppRepoService: t@67852700: Error importing thinapp (Chrome1) package. Error code: 400 (ERROR_THREAD_MODE_ALREADY_BACKGROUND)

• How can I fix the error of the workspace 'because the file is locked, you don't have necessary permissions... '. » ?

  I get the error message "could not apply the workspace because the file is locked, you don't have the necessary access permissions or another program is using the file." ... "When I try to open a workspace. Any ideas how to fix the permissions and this file has no permissions. I'm on a Mac.

  See here:

  CS5 'locked '.

• Error of the workspace

  When I connect to the workspace, I get the error "status: 404 - not found". Looks like some sort of related police.

  I was wondering if someone went through the same error.

  Thank you

  Content: text/html; Charset = UTF-8

  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 project / / BY" > ".

  < HTML >

  < HEAD >

  < TITLE > error 404 - not found < /title >

  < / HEAD >

  < BODY bgcolor = "white" >

  < FONT FACE = Helvetica > < BR CLEAR = all >

  < TABLE border = 0 cellspacing = 5 > < TR > < TD > < BR CLEAR = all >

  < FONT FACE = "Helvetica" COLOR = "black" SIZE = "3" > < H2 > error 404 - not found < / H2 >

  < / POLICE > < table > < /TR >

  < /table >

  < TABLE border = 0 width = 100% cellpadding = 10 > < TR > < TD VALIGN = top WIDTH = 100% BGCOLOR = white > < FONT FACE = "Courier New" > < FONT FACE = "Helvetica" SIZE = "3" > < H3 > of RFC 2068 < i > Hypertext Transfer Protocol - HTTP/1.1 < /i >: < / H3 >

  < / POLICE > < FONT FACE = "Helvetica" SIZE = "3" > < H4 > 10.4.5 404 not found < / H4 >

  < / POLICE > < P > < FONT FACE = "Courier New" > server has not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. < /p > < p > if the server does not wish to make this information available to the client, the status code 403 (refused) may be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. < / POLICE > < / p >

  < / POLICE > < table > < /TR >

  < /table >

  < / BODY >

  < / HTML >

  It is similar to the following question - Re: could not start the SSP

  See you soon

  John

• Help understand the workspace configuration error

  Hello
  
  I get the following error when trying to set up a new workspace (Apex 3.2.1/10g) using an existing schema:
  
  ORA-20001: error ORA-24344 30: success with compilation error
  APX8668250WS commissioning error.
  
  The workspace was not created. Nothing useful that I could find in the alerts log or logs of Apache. Not sure where else to look... all APEX objects in the database appear to be valid. Any thoughts?
  
  Lori

  Check the view of dba_errors for pl/sql errors.

  Select * from dba_errors;

  CITY

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the

  I'm unable to access my LR5.7 of my recent holiday catalog. I am running Windows 7 (64-bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot open another application already has its opening.» Leave the other copy of Lightroom before trying to launch' the problem is, that I can see a copy of the open LR5 and cannot locate the "." lrcat.lock"the specific catalog I want to open the file. I tried to re-boot my computer, but it did not work.

  Thanks Geoff. I was finally able to locate the "." lrcat.lock' of the relevant folder to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. Thank you

• Cannot open the application of planning through the workspace

  Hi all
  I have installed and configured the Hyperion products in the following order
  
  -> foundation services
  -> server Essbase
  -> Essbase Administration service
  -> planning
  -> reporting and analysis
  -> workspace
  
  We know that this workspace is a unique user interface.
  
  After setting up, I tried to open the planning via the workspace Application, but I could not able to find "* classic Application Administration *" under administer option of the menu navigation to guide me.
  
  Thanks and greetings
  Alizée

  Try to rerun the configuration utility and configuration of Foundation > Web server

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem with Photos Soft - error message the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00

  Hello, hope someone can help with my MacBook Pro sluggish.

  I'm in OS X Yosemite 10.10.3 version and tried to upgrade to El Capitan 10.10.5 on a Macbook Pro 13inc mid-2012.  He said it has already downloaded twice, but when I open the software it is still sitting at 10.10.3 without modification, download seems to take a lot of time - been sitting for about 6 hours.

  Now I trying to open the photos app but get the following error coming - the application built with PhotoLibraryPrivate version 215.65.00 but works with version 209.52.00.

  Any advice on what are the options for my new photos app! Have you tried different time machine backups and the computer does not like it either

  Upgrade to El Captain OS X 10.11.2 which includes Photo 1.3

  I have no idea of what you see on "El Capitan 10.10.5" as far as I know is not exiat

  LN

• Open built in the workspace Addons in LabVIEW application using the API

  I do Veristand project who uses a lot o custom code for additional features (database Custom logging, several preconfigured stimulus profile running on action of the user, custom logging datafile, customized SCADA-like display of the State of the system (pipes, valves, pumps, etc.)). On any other user of hand interface for the control of the program must be simple, because operators use (the only options, no change in operation) and similar to the previous system solution (which was HMI, touch screen with multiple monitors).

  I plan to do LabVIEW custom application for GUI which communicates with the gateway Veristand and target using API functions.

  However, I want to implement some already existing in the workspace tools in LabVIEW code, such as monitor of the alarm. There are "Open workspace tool" API functions in the labVIEW Veristand API function list. This function requires the toolpath to workspace as an argument. How can I set path for those built in the workspace tools? I'm not managing to find with the simple search.

  You may want to consider this topic

  http://forums.NI.com/T5/NI-VeriStand/open-workspace-tool/m-p/2253154

  Concerning

  -Eric

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.