Support for CD/DVD external USB NB100

Similar Questions

• Satellite L300, how to start from the cd/dvd external USB drive?

  I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
  I would like to start on a connected external USB CD/DVD player
  PROBLEM:
  BIOS will not start on this CD/DVD disc.
  In the BIOS boot priority is: CD/DVD, USB, HDD
  BEHAVIOR:
  When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
  QUESTION:
  Is it possible at all boot for CD/DVD USB external?

  Thanks for the efforts made to respond.
  Concerning

  It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

• Portege R500: XP Installation with CD/DVD external USB - SOLUTION drive

  Hi all!

  I just wanted to take five minutes to inform you that installing XP on a Portégé R500 with external USB CD/DVD drive is possible, even if you have already deleted Vista and with a CD bootable XP Win in hand.

  First go into your BIOS and check / set first boot device is CD/DVD player

  Start your installation of win XP from the CD without the F6 thing and let go his way

  After some time, the installation stops and says "cannot find the file xxxx" and you are invited to tell where is this file

  "" Just replace the drive letter "C:" which is given by default with the letter of your CD/DVD drive (and leave the rest as it is) and the installation will continue until the next "cannot find...". "and you need to again replace the drive letter, etc...

  After a complete installation 'automatic assisted manual', you are welcome in Win XP!

  The next question is "where can I find my CD/DVD drive letter?" and the answer is "it's the next letter after your last HARD drive letter" (I consider you have only your Portege with nothing else plugged that your CD/DVD) so more often it will be 'E' C: being the first partition of your HARD disc : is the hidden / recovery partition that winning creates.

  But don't worry, if you type try to the wrong letter, that you will have as much as you want until you find the good and the following "cannot find...". "it will remain the same.

  I hope that this information will help some of you who want a fresh installation of win XP from a newly formatted HARD disk.

  With sincere friendships.

  Mage.

  What a great information!
  Thanks a lot for posting this.

  I think it might be useful to others here.

  Good bye

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• How to use R & amp; R for backup on external USB HDD?

  Hello, I have two Lenovo workstations and we Desktop and other is Thinkpad and I want it to be saved on a single 1 TB external hard drive and I can't seem to backup both of them on external HD single.

  It seems that this does not work with only 1 TB HD no longer and well I format NTFS Partition with a primary active status and unique.

  Second, if I have divided into two partitions, the first work then and the other fails.

  The operating system on two workstations are running with Win-7 and using the same version of R & R.

  Are there documents to back up several workstations using R & R and yes I have read some forums on this topic but was not clear.

  No matter what docs, you can provide details would greatly apprecaite it.

  Thanks in advance.

  Jr.

  
  

• Updated BIOS for a boot with USB (external)?

  I have a laptop of G50-104NR with Windows Vista Home Premium.

  It doesn't seem to be a BIOS update available at HP when you run the update from HP. As best I am able to determine, the BIOS does not support boot from an external USB device. Does anyone know of a source of an update of BIOS or other workaround to allow booting from a USB device?

  Thanks in advance.

  the update of hp does not always show the BIOS updates.

  Enter your product number in the search box at top right of this page, select software downloads and the pilot, then the OS you are using.

  you will then to the drivers page for your laptop.

  most of the newest BIOS of HP usb Boot support

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Question about reinstalling operating system via external USB CD/DVD

  Hi all. I need to reinstall the operating system on my portege m200, but I have a lot of problems:

  (1) the recovery DVD seems to not work on my external USB dvd drive
  (2) at the start, it is impossible run any OS on cd USB external dvd drive, so I can't use another XP or Linux OS at startup

  Someone told me that I need a particular type of dvd-pc card reader. Is it true? dvd to pc-card readers are good or I need gadget particular toshiba?

  Thanks for the help and sorry for my English
  idum

  Hello

  As far as I know that you need a compatible USB key to boot from the external drive.
  I found this useful document with a list of compatible readers on the Toshiba support page.
  Please visit this link:

  http://support.toshiba-tro.de/KB/40/TSB4800R70001R01.htm

  Best regards

• My laptop does not recognize the DVD drive or an external USB DVD drive.

  My laptop does not reconise the integrated DVD or an external USB, DVD player.  But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine.  He could read the disc.  Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ===================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please make all underneath the same if you have done some before as is often
  the set of operations that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device.
  The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
  the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
  If the drive appears not to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, might
  having a cable loose or slight corrosion on the contacts (usually for a laptop) and
  other questions.

  Your CD or DVD drive is missing or is not recognized by Windows or
  other programs
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other
  programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that
  you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the
  Setup Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check
  in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
  Often, clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system
  Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
  No function while others do so properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? He
  are some registry entries that do not fix the resolution of problems and those who "might".
  be the cause.

  Check with your system manufacturer Maker and possible device for two firmware
  updates and the correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
  the key of course because there will be other subkeys in these keys. Do not forget to ask specific
  involved as well as the settings key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
  Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager,
  that displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite Pro P100 - cannot boot from external USB DVD

  My internal DVD player on my Toshiba Satellite Pro P100 failed, and my windows is broken.
  So I bought an external DVD drive to boot from, so I can recover the system using the product recovery DVD.

  Now, he actually goes ahead and starts from the DVD. But once in the setup it gives me the message: "ERROR: file Setenv.ini D:\Setenv.ini or X:\Tools\Setenv.ini not found!

  So I went ahead and checked if the file was... it was... but it is on Drive E:\ (probably because it's a USB device I'm starting from)

  -J' did some research and found that I needed to run the command: X:\tools\recogui /FE: say the recovery my files were actually on drive E:-which has helped a little... until I got a new error where it was always looking for the *. TPA file on drive D: eventhough I have via recogui had specified otherwise.

  Now what do I do to understand everything is to the recoveryprocedure on drive E: and not D:, as he seems to think?

  As I am in the middle of a period of review, quick response would be GREATLY appreciated :)

  Bad new boyfriend!
  Boot from external DVD USB drive is NOT possible!

  You can start only from the inside, ODD, HARD, LAN disk and external USB FDD (floppy)

  Greetings

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• DvD - external rom for Portege 3500

  I recently acquired a Portege 3500 as well as an external DVD-ROM from Toshiba (model No. PA3246U-1DVD). As I try to find the drivers for this I failed horribly (for the dvd - rom). It is connected via a CardBus card. Toshiba says that drivers should be part of Windows but my system is unable to find them. I was wondering if anyone here had drivers for the Portege 3500 for it. If I'm not mistaken, they should be for PCMCIA adapters. Any help on this would be greatly appreciated.

  * Note: retailers say the ships of external Toshiba DVD-ROM with cd contain the manuals and drivers. If anyone has a copy or could direct me to a site with them it would be greatly appreciated as well.

  above all external DVD players are manufactured by freecom

  You can find the driver cardbus, freecom for your 3500 here:
  http://support.toshiba-tro.de/tools/Portege/P3500/win-XP-TBE/CardBus-drv/CB-drv-P3500-XP-TBE-5135661-en.zip

  If you need additional drivers, you can find and download on the website of freecom (www.freecom.com)

• File USB supports for disappointment 19BL502B TV

  Hello

  After reviewing various brands and models of 19-inch TVs, I decided on the Toshiba 19BL502B, after downloading the manual for http://www.toshiba-om.net online.

  What particularly attracted me to it was the support of USB for movies Xvid encoded, as described in 'Appendix C: supported File Formats for USB Mode' in the manual that I downloaded from the top.

  So, I bought one, paid in cash, but when I try to run files xvid, TV does not have this format.
  Research in the paper manual that I got with the TV, Xvid files are not mentioned at all in Appendix C.

  Convert these files in mpeg2 standard comes with a heavy fall in quality and even when converted to Vob format, the image is ok, but there is no sound.

  I tried to take it back to the shop but they say there is nothing wrong with television, as it does what it says in the manual.

  So what's happening? Why my new TV from Toshiba UK does not supports xvid, even if the online manual says it does, and I know that make televisions more expensive and larger Toshiba?

  Can I get an upgrade of the software that supports xvid as advertised?
  My software version is 0.6.6 V and when I do an update he claims it's the lates version.

  So is there an earlier version of the software which, is there a place I can download it, put it on a USB key and upgrade to get what I consider all of the announced features?

  I am very, very disappointed, because it was really the main reason that I bought the machine, so I didn't have to reconvert and DVDs to read.

  Disappointed Frank.

  Hello

  File formats supported for USB mode are listed in appendix c.
  And the video Format Xvid is supported for files with the file extension. AVI
  So if your movies are encoded in the format xvid video, you must use the .avi file extension.

• External USB hub limit for Satellite Pro C650

  Is there a limit to how much you can connect via the Satellite Pro C650 of external usb ports?

  Provides four ports hub I, ports seem to work individually and all devices operate normally when plugged directly into the top of the Tower, but when all devices are plugged into the hub and combined high tower, there are future errors.

  Thank you
  Karyn

  Well, I think that this should not be a problem if the unique USB hubs provide clean power.
  The fact is that the only USB port provides common 500mA and if several devices would share the power of a USB port then it might be possible that the 500mA available would not be sufficient for all USB devices.