After istalling vista not showing no hardware networking

Similar Questions

• After effects is not show in creative cloud when I go to download

  After effects is not show in creative cloud when I go to download. @@@

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Vista not seeing PC on network

  My network is connected to a WRT54GS, before I had a wired version not wireless I could see the end network. Now with the WRT54GS I see her, I can ping, internet access, print to the network printer, and others with XP can see my vista PC. It is a pain if I need to transfer files that I have to go to other machines. All are on the same workgroup, all can ping, internet access and network. In short, everything works fine, but I do not see the network. Just my PC no other PC or printers, and discovery is enabled and set to the private sector. All suggestions will be useful. I've changed the settings in the router and the PC but no luck.

  Mark

  I want to thank everyone for help with this problem after watching on the other PC's I saw my mistake is the firewall blocking, it goes back to say oops 'seek first the basic stuff. " But I can see all my vista PC network

  Thank you

  Mark

  NightRider RV Inc.

  www.nightriderrv.com

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Installation of Windows 7 after Windows Vista (not an upgrade)

  I am running Windows Vista as my OS and I used the backup system for all my files, drivers, and applications for a disc hard iomega.  If I install Windows 7, (not upgrade); I'll be able to restore my files, drivers, and applications without problem? This is a clean install.

  Windows Update has nothing to with the upgrade or clean install of Windows. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• after effects is not showing the images unless I make them 3d layers.

  Hi guys,.
  AE shows not all images unless I have mark their layers in the form of 3d layers. I need layer background flat 2d so how can I solve this problem?

  Not looking through the active camera in your comp Viewer. You're looking through one of the other views (top, side, etc.) that displays only the 3d layers.

• Why the control panel network connections window does not show my active network connections.

  There is nothing visible in the network connections window. I still have full internet access.

  Hi GarryKerluke,

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  See the Microsoft article below and check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• XP toolbar based on the network not showing folder does not icons after sleep. Is it possible to "Refresh" w/o reboot? __

  I have a couple of toolbars (right-click Taskbar, toolbars, new toolbar), I created the network folders. More often than otherwise (used to not be that way a few years back) do not show the icons on the toolbar after the release of the standby mode. I can right click and choose "open folder" and reach the places I need as a work-around, but that beats the purpose of having the toolbar.

  I would like to have a way to refresh/reset the toolbar and have the icons without rebooting (or deletion / recreation). An hour or two, they made their reappearance - of course like to know what sequence of events caused that. Select / deselect the options to the right click (show the title, text, etc.) on the toolbar does not make the icons reappear.

  Hi swBytes,

  Try to create a mapped network share drive. Subsequently, you try to add the drive as a toolbar.

  Mapping a network drive

  How to connect and disconnect a network drive in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After re-installing Vista: error message "Windows doesn't detect any hardware networking".

  On another thread Microsoft Answers, I was advised to do an "inplace upgrade" to Vista to solve a problem I had with the opening of Word documents.

  I followed the instructions but was unable to do the upgrade in place of Vista.

  (The 'Upgrade' option has been blocked during the installation process.  And there is no other choice available "Troubleshooting", even if the directions had mentioned that this could be an option.  There is no workaround solution mentioned about how to proceed where it upgrade when the 'upgrade' option has been blackened.)

  So, I did a clean install of Vista - after saving all my files on an external drive, of course.

  This fixed the initial problem that I ask.

  Now, however, I can't access the internet after you complete this process.  I tried via wireless and services to broadband.

  Reads the error message: "Windows doesn't detect any hardware networking."

  How do I fix this?

  Thanks in advance.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• I am currently using Windows Vista 64-bit and every so often Vista shows that this network adapter is spent in local mode.

  I am currently using windows vista 64-bit and every so often vista shows that this network adapter is spent in local mode

  I did several tests, including
  ping google.com
  to test if it is online and this proves that when its premises in sound mode now online
  I also entered the adpaper of netowrking and disabled so that nothing can turn it off energy saving
  my antivirus is AVG
  AND use zonealarm as my firewall program Please note even with disabled zonelarm it still happens
  can anyone help
  ?
  original title: network adapter shows onffline but it is online

  Hello

  You can try to uninstall and reinstall the network adapter.

  To do this follow these steps:

  1. click on Start, in the Start Search bar type device manager and press enter.

  2. in the list of devices, right-click of the network adapter, and then click on uninstall, if she invites you to completely remove the driver files, click ok to delete.

  3 restart the computer once the uninstall is complete.

  4. after the computer restarts, it will automatically detect and install the drivers.

  5. check if the problem is resolved.

• Satellite Pro P300-1AY: Vista does not display computers XP network group

  On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
  On my old XP computer, I still see the new Vista computer

  Can you tell me why the Vista computer not always displays the XP computer in the network group?

  On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

  Hello!

  Have you disabled the firewall on the XP computer?
  Maybe a 3rd party security software is blocking it.

  Check the registry and go to:
  HKEY_LOCAL_MACHINE es\lanmanserver\parameters
  In this case don't Scream no entry with the name of Hide.
  If you have such an entry, delete it.

  Good bye

• Unable to connect to the college network after installing Vista business on Satellite A215

  I have a Satellite A215-S4757, which I brought with me in College, I was told that the server of the College has a problem with vista home, which is what I currently the wireless is down, so after installing business and plug in the ethernet cable, my laptop does not collect several wireless networks available, or otherwsie

  What to say that you can also access the network using Vista.
  But please note that the Vista operating system supports additional network access security settings that should be disabled or reset.

  How this site published by Microsoft should help you set up the network with Vista settings:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  Here are several tips:
  You should try to open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  Vista supports additional firewall options. Please disable all trying to connect to the server.

• Airport not showing is not as network device?

  My Airport Extreme 802.11ac does not appear in the finder as a network device. It showed in the previous Extreme model I was using, then leave for any reason any. After messing around for a month or two, then trying to get it working again, I bought the new 802.11ac AE, but it does the same thing.

  I have two other devices that appear in the finder under the shared part of the side bar of the Finder window, but cannot figure out how to show by EI. The wireless feature works very well, as a printer BSE connected to the USB port of the AE. Internet

  It would be different if I was using the IP address of the type 10.x.x.x instead being in bridge mode and using 192.168.1.X?

  Any suggestion is appreciated.

  My Airport Extreme 802.11ac does not appear in the finder as a network device

  In the finder it will show only upward if you have a connected USB drive.

  It showed in the previous extreme model that I used

  Only if you have the network resources available to him.

  Computers will be displayed, because they offer resources network, the PF to be exact.

  But the airport will not be displayed. Mine is not, and never has.

  My Time Capsule arises because it is a hard drive offering services of files on the network.

  Printers will not appear in the finder no longer...  Again, I have printers online... they do not show in finder and never have any version of Mac OS X, I used.

  However a printer with USB or SD card slots and a wired card which offers services of files on the network may appear... In the only finder services files will be displayed.

  EI has to offer network file services appears in the Finder... Plug a USB stick into the USB port and set it to share on the network and the AE will then appear in the finder.

  The place that you are looking for your AE's utilitarian Airport... It's the Apple of method available to see you the configuration of EI... no viewfinder.

• just formatted my WD my passport ultra 1 TB to my xbox 1. Its now not show on my windows vista computer

  OK, so I just format my WD my passport ultra 1 TB to my xbox 1. Its now not show on my windows vista computer, worked and connected very well before, but now nothing appears. Anything to help. Thank you

  OT:

  Please help with this

  Try this: go to "Start" then go to "Computer" right click on computer and left-click 'manage '.

  This will bring you to the management of the computer. From there, you should see the drive. Try "initialize disk".

  If you are not the "backup operator" or the "Administrator", then go to the control panel - system tools

  -Administrative Tools, then click on "disk management". From there, you can follow these instructions.

  Initialize new disks

  Backup operator or administrator is the minimum number of members required.

  To initialize new disks

  1. In disk management, right-click the disk you want to initialize, and then click Initialize Disk.

  2. In the dialog box initialize the disk , select the disk to initialize. You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  	Note
  	The disk is initialized as a basic disk.

  Additional considerations

  • New disks appear as uninitialized. Before you can use a disk, you must first initialize it. If you start disk management after the addition of a disk, the disk initialization Wizard appears then you can initialize the disk.

• Why my network connection properties do not show more UAC prompt?

  I can't put my connection properties more. In network & sharing center when I rightclick > properties on the connection interface, it shows no UAC prompt. I have disable Netbios over Tcp/ip, but every time that I connect it changes to default (enable netbios..). I'm the only Admin with 2 profiles on my personal laptop without connection (wired / wireless, office, etc.) of local network either. Earlier, the same connection worked fine with the settings 'disable netbios. I tried to create the new connection (same ISP, USB 3 G dongle), reinstalled the drivers of network cards, deleted the old connections, but the problem persists. I can't set my connection properties!

  I noticed most of my local network/Services have a profile not attached with long unknown password. New connections I make in a user profile does not show in my another user profile, it wasn't like that before. I want to know the default TCP/IP registry, in particular Linkage, Bind, export etc if this may be the reason. (Values in HKLM/System/CurrentControlSet/Services/Tcpip/liaison & Interfaces examples / by default). Of course the values may differ in each machine, but I want to have an idea.
  Finally, I would like to see some improvements in security in the next editions of windows. UAC never warn you when some outsider load .reg hives or changes to the settings, it annoys only his own user/admin. Our firewall is open for the subnet Local in the discovery rule of the network for the network private by default, assuming that we are all connected to the cable network of offices. There is also two versions of the firewall for home users specific & businesses users. It is impossible to uninstall a Service it it gets corrupted or protect the process svchost.exe/legit if someone hacks. Coz anti-virus software fails to catch the thieves hidden legitimate process. UPnP, printer ports, of the discovery of the network are all known loopholes in windows firewall forget remote things. If someone makes an unknown connection to my PC something must warn me at least. With fast connections to today I don't think that any Messenger needs firewall exceptions. It is unclear what programs/services the firewall knows & blocks ("all programs/services that meet the criteria"), it should be editable to all net database using software/services, which can be exploited by the bad guys. I don't see any logic in the purchase of an operating system, then buy a firewall too, it should meet. Also a protection tool for our vulnerable register which is originally from the success of a rival to round shape & red/green color used to make a pie & a big city is named after it. :-)
  Thank you! -Manish. 17/10/12
     
  Hi, Maria Teresa K,.
  Thanks for the reply with some good suggestions & I love your header "Refreshing Office & opening word doc", operations, sometimes even what is more difficult and more complex are easier in windows.
  -Very well, it was related to administrative privileges removed by a hacker or my ISP. As I've seen Undocked profiles with long password in most Network Services & Local such as RPC, BFE.
  I wasn't starting in safe mode with networking (press F8 at startup), then then ran mode Directory Services repair as well. Finally called my ISP was no Sim Card of my 3G dongle. is CHANGED!
  Then as a last solution, I have my Dialer app right click & he ran as administrator. This time I could see UAC prompt while clicking network map & could set the connection properties.
  You were right about my two profiles being Admin & it took place in both, so they used netuser thing (that infamous Director of integrated hidden a/c. which is not known by the users but is well exploited by hackers). I saw this profile sunflower photo in my profile %-appdata-temp folder, I use different images for my two profiles. Also, someone wrote to Parvdm port I checked later, I don't have any printer at all, so this hack port printer & file and printer sharing is the culprit. Anyway now it seems fine, only this soft dialer privilege token is set, then run it as administrator, it's funny that I am the admin.
  Yes, I ran several system restores but this intrusion is older that my restore point limit, yet once no way to keep/save our best Point restaurant forever. Not sure/easy way to fix a corrupted user profile, to copy all in a new, most of the software refused to work, a lot of customization needs to be redone. This change of name ntuser.dat is too scary, what happens if I can not log on later, I had a nightmare with LogonUI.exe when I applied a 3rd party desktop theme shit earlier, I had to reinstall windows. So start, logging on things that I dread, all must keep a portable external drive with windows & its profiles.
  Now, I read & know using Standard user instead of administrator has a/c. for browsing the net, but this theory does not work in practice so many apps to keep updated/re-installing 5.0.6.1 versions each week, and many apps produce UAC guests. Half my time wasting on typing Admin password in the profile Standard exposed, much easier for keyloggers to record it & then secondary logon also runs with remote registry, management of firewall remotely etc. OK, they are not checked in my Public network, but they are in the list of the firewall exceptions for can not show WARNING!
  My current problem is solved, but I insist on these few things to develop;
  (a) a separate tool for the Protection of the independent record.
  (b) with HKLM and HKCU a separate HKLW & HKCW for Windows registry keys that is Unchangeable no matter what. To do this, future apps should be as portable as possible.
  (c) more intelligent firewall multimode, antivirus, recovery tools built in, checked the IP range for windows updates/upgrade. Services and process manager.
  (d) the names of files dynamic with static virtual names for the same. Password for any whole folder/usb/removable/external drive.
  (e) all the hidden info, exposed in detail to the owners of the OS, not for some professionals, don't worry not bad know all this, so why hide from users. for example, I don't like the unknown password in BFE service responsible for firewall, if it is managed by others, then what am I doing here! In order to better help files offline if you please.
  (f) all stay is discussed by experts revered worldwide.
  Thank you! -Manish. 21/10/12