support for VMware workstation 7

Similar Questions

• Assign 1 NIC purely for VMWare Workstation

  Hi all

  I recently gave me a Z1 HP Workstation PC for my office.

  It is an integrated wireless and wired connections.

  What I would do, is use the wireless purely for VMware workstation 7 and connect it to our test card WLAN to provide connectivity to the outside (for the windows updates, etc.).

  Then use the wired connection, to connect to the domain network.

  Anyone know if this is possible? I can't find much info about him.

  Any help would be appreciated.

  Thank you.

  Good then you have to try to work around the problem.

  The host WiFi network adapter, let all IP6 verified but protocols and then manually set the IP4 address to a 169.254.x.x address while retaining the good mask subnet, default gateway, and DNS for the LAN router.  It comes in a way that is known to work however, it is still dependent on how the wifi adapter and the WiFi router manages normal communications.  If it works, what it does is to allow the virtual machine is to use the VMware bridge Protocol but the 169.254.x.x address stops the host itself to use.  Other normal settings for good subnet mask, default gateway and DNS servers for the LAN router has been know to turn on the bypass, which will take place on a WiFi network card and or WiFi routers.  In some cases, make what you want may have to be done via wired Ethernet, if a WiFi solution cannot be implemented.

  If it does not we know as there may be other things to try with the WiFi before you have to implement a wired Ethernet solution.

• Red Hat GFS is supported for VMware?

  I was not able to find a definitive answer about this, then take the community to see if I'm right:

  Red Hat and VMware does support Red Hat Linux computers virtual running GFS? We have a set a production level Wordpress blog servers running RHEL 5 64-bit using physical storage shared RDM (100 GB) and when these virtual machines are under heavy load the GFS volume freaks out and drop-outs. We need to power cycle the VMs (pull on the plug) and start them upward for GFS rerun.

  I was not able to find that our facility is even supported even though it works technically. Anyone know? No official word from Red Hat or VMware on it?

  Thank you.

  The only grouping support supported by VMware is MSCS.

• Capture the statistical support for VMware Cluster

  Hello and thank you for taking the time to read my question.  In the near future I will have a cluster vmware small I need to generate reports of use of resources on.  I saw a tool called queryperf which seems to provide for all my needs and then some, but I'm not sure how get or use this tool.

  I normally just jump on an esx host and try the command to see if I have it but I'm traveling at the moment and do not have access to one.

  To wrap this up, I'm very keen to learn the following:

  How no one acquires queryperf?

  Where the tool lauched from?  (by this I mean: guest operating system, command-line esx host, ect)

  How to run on a cluster vm instead of a single server/client integer.

  Thank you for reading my post and I thank you for your help.

  I'm not aware of a tool called queryPerf, but there is a VI API method called queryPerf() that allows you to query the performance data of your vCenter/ESX (i) /VM (s) http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.PerformanceManager.html#queryStats

  A great place to start to look for some samples or past issues/scripts/utilities that could be used to question the different associated performance stats is the VI API forums: http://communities.vmware.com/community/developer/managementapi?start=0

  There are also a few utilities preset that you can watch, onethat may be of interest is the viperformance.pl which is part of the VI Perl Toolkit Utilities http://www.vmware.com/support/developer/viperltoolkit/viperl15/doc/perl_toolkit_utilities_idx.html

  Also, here is a collection of news and recent documentation concerning the performance collection/analysis using VI SDK/API: http://communities.vmware.com/docs/DOC-9840

  Recently, VMware has started a new podcast for developers called the Coffee Talk where various topics concerning VI SDK/API/scripting/etc will be covered and the first two were related to the new vSphere SDK but she also had a lot of good practices on the collection of performance data that relate to the current VI 3.5 and coming vSphere 4.0 that you might find useful : http://communities.vmware.com/docs/DOC-9912

  You will be able to use the queryPerf() call in various set of programming languages (Perl, c#, .NET, PowerShell, etc) who can communicate with the VI SDK via the SOAP API. Depending on the platform and what type of data you want to collect, this should help you get started.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Determine the version number and compilation of VMwareTools for VMware Workstation 7.0.1 build 227600

  I installed VMware Workstation 7.0.1 build 227600 on a Windows 7 64-bit machine.  Update the VMware Tools using the compiler, one of the instructions is:

  CP /mnt/cdrom/VMwareTools-x.x.x-xxxx.tar.gz /tmp/

  How can I determine the values of x in this case? When I tried the following command:

  CP /mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz /tmp/

  I received the following error message:

  CP: cannot start ' / mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz':

  No such file or directory

  The GuestOS I tried to run is:

  Release of centOS 5.2 (Final)

  I always use AutoComplete with tab to get the name of the file.

  Type:

  CP/mnt/cdrom/VM, and then press your tab key. He must complete the rest automatically.

  Then complete the order with the part of tmp folder location.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• MOTHERBOARD INTEL DESKTOP SUPPORT FOR VMWARE

  Hai

  INTELDG45ID supports vmware technology... That is, can we install vsphere as vm in worksation

  Look at this link

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=4283306 & SKU = MBM-G45ID-Q6700

  Thank you

  VAMSi

  _{INTELDG45ID supports the vmware technology}

  Yes, you can install vmware if is having motherboard G45

  • Intel DG45ID (G45 motherboard)

  • Intel DG35EC (G35 motherboard)

  • Intel DP35DP (P35 motherboard)

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points

• Support for VMWare VT on HP Pavilion HPE h8xt

  I just bought a new HP Pavilion HPE h8xt and want to use VMware player to create a virtual using Windows 7 64-bit computer.  When I tried to do, VMware has informed me that I had to enable VT in the BIOS.  I restarted the machine and press F1 and F10 and have a 2.10.1206 interface of American Megatrends, who informed me that THE system BIOS has been CHG_705.ROM v7.05.  Anyway, I can't find any associated BIOS Setup option.

  The processor is an i7 2600, which is quite common.  This processor supports VT?  I just need to load a new BIOS?

  Thanks for any help!

  Hi Trailway,

  You should be able to boot into the bios and look for VT usually, it is disabled by default. You might find that it listed on the tab of the System Configuration.

  Run this program.    Test for 64-bit hardware  She say on the hardware virtualization?  Yes or no?

  Another test would be to download and use PC Wizard. Click processor under the hardware then scroll to virtualization. It should indicate Yes and if it is enabled or disabled.

  What is the number of exact product for your PC?

  I do not have the Intel i7 - 2600 k but my bios is different from the bios of your PC.

• Hardware support for VMware Fusion

  I want to create a virtual machine on Macbook Pro retina 15 "(MC975ZA) with 8 GB of RAM using 'VMware Fusion'." Please confirm to me that VMware Fusion is taken in charge for the MacBook Pro retina 15 "(MC975ZA) material."

  Yes, vmware fusion 5 works on mac book pro Retina of. The latest version supports the display function of retina as well.

  Please visit http://www.vmware.com/support/product-support/fusion/faq/requirements.html

  Download the demo version of fusion 5 and try it. If you have any questions, you can post in the community. If he is convinced to buy it.

• Support for VMware ESXi 5 MPLS

  I'm curious to know if the virtual switch can provide that some MPLS support so that can be unloaded from the VM? At present the virtual switch looks like a switch single layer2. Is it possible to get more features in Vsphere Enterprise?

  He basis of VMware, but not rack mounting.  It works just like a virtual machine on each ESXi host.

  You need to ask cisco for the licensing costs.

• Host kernel taken Linux supported for vmware Server 2?

  VMware is advertising that VMware server can be installed in 64 bit, Linux, but that's not true. I can't install it in one of my 64-bit Linux host. Only legacy distributions are supported. I use openSuse 11.2 64 bit or Ubuntu 9.10.

  Is it true that VMware is NOT recent Linux kernels of Pentecost compatible 2.6.3x? Only legacy host kernels Linux is supported?

  When this catastrophic situation will be fixed in the new version of Pentecost?

  None of the patches to install VMserver or workstation on more recent than AFAIK 2.6.26 kernels are officially released by VMware.

  If you really think that you need a core of bleeding edge, you must use these patches not supported.

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• How to set an MTU of 1600 for test Lab at home for the NSX on Vmware workstation

  Hello.

  I'll set up a laboratory at home to build a laboratory to the NSX. I am running 3 on VMware Workstation 11 Esxi hosts. All three hosts of esxi run each 4 Ethernet adapters on them.

  To configure installation VXlan for my lab at home, I have modified the virtual machine's .vmx file and changed the vmxnet3 device and it works.

  Ethernet1. ConnectionType = "custom".

  Ethernet1.virtualDev = "e1000".

  Ethernet1.wakeOnPcktRcv = "FALSE".

  Ethernet1. AddressType = 'generated '.

  ethernet2. Present = 'TRUE '.

  ethernet2.VNET = "VMnet1.

  ethernet2. ConnectionType = "custom".

  ethernet2.virtualDev = "vmxnet3" - change to vmxnet3

  Adapter type VMxnet3 only is not supported for VMware workstation and also one of my hosts broke down several times with the low error message in the log file.

  2015-08 - 02T 13: 37:48.254 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.261 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-5 | I120: VMXNET3 hosted: Packet has no eop, 1 scanner, tx ring size 512, txd valid 0.

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.536 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:51.436 + 10:00 | VMX | I120: E1000: E1000 full rx ring, empty packages.

  2015-08 - 02T 13: 37:53.636 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows has changed: 1 make MKSWindow (s) total 2.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State poweredOff without reset, soft, softOptionTimeout: 20000000.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: Stopping VCPU son...

  2015-08 - 02T 13: 37:56.567 + 10:00 | SVGA | I120: Fate of thread SVGA

  2015-08 - 02T 13: 37:56.571 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 1.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: GDI-Backend: HWinMux stopped making the composition of the window.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 0.

  2015-08 - 02T 13: 37:56.575 + 10:00 | VMX | I120: Thread MKS is stopped

  Can someone guide me how to set up a lab NSX on VMware workstation and use 1600 MTU for VXlan traffic. Any help is very appreciated.

  Hi all

  I managed to solve this problem by separating the storage traffic to a different vswitch and the traffic to a different VDS NSX.

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 e1000 up to 1000Mbps Full 00 0000:02:01.00: 0C: d 29:a4:7: Intel Corporation 1500 6th 82545EM controller Gigabit Ethernet (copper)

  vmnic1 e1000 up to 1000Mbps Full 00 0000:02:04.00: 0C: 29:a4:7 d: 78 1500 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic2 e1000 up to 1000Mbps Full 00 0000:02:05.00: 0C: 29:a4:7 d: 82 1600 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic3 0000: 0b: 00.00 vmxnet3 Up Full 00 10000Mbps: 0C: 29:a4:7 d: 8 c 1600 vmxnet3 Inc. VMware Virtual Ethernet Controller.

  ~ # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  1536 5 128 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  The VM network 0 0 vmnic0

  0 1 vmnic0 VMkernel

  0 1 vmnic0 network management

  DVS name Num used Ports Ports Ports configured MTU rising

  dvSwitch 1536 10 512 1600 vmnic3 - for network traffic

  DVPort use customer ID

  7 1 vmnic3

  81 1 NSX 2 controller nsx_controller_4be65643-37ca-468e-b00a-f711d6cc5447.eth0---noeud

  79 1 nsx_controller_8bb60e33-b290-4252-92b1-501aa2f83607.eth0---noeud NSX Controller 3

  110 1 vmk2 - vtep interface for the host

  119 1 Linux1.eth0 - test Linux VM

  This laboratory works fine for me now and my Adviser for laboratory at home will be not to use the same network card for storage traffic that was used for the traffic of the NSX.

  Thank you for all your help.

• Question for staff: VMWare Workstation 7: end of life?

  Can any of the VMWare team please clarify the situation concerning VMWare Workstation 7. My security software said 7 Workstation is end of life, and it won't pass me with rating of 100% because of this. Is there still some security fixes and stability issued for VMWare Workstation 7? What is the date of end for security patches support?

  I do not see where it is noted the end of Support (EOS) for VMWare Workstation 7.

  It does not separately, because it is not already EOS.

  from the link:

  VMware will support the previous major version and its minor versions for 18 months

  André

• VMware converter 4 support for partitions on dynamic disks

  I currently have a server physical windows 2003 which has its system and data partitions defined as dynamic disks (C and D partitions lie on disk 0-dynamic) not well why it's set up this way, it was built just like that.

  The goal is to convert this virtual server and I read many forums stating that dynamic disks are not supported for vmware converter, but some cases have succeeded where the target score was a record time-basic-but-now-dynamics.

  Is this the case? and if so, what alternatives can be tried to virtualize the server.

  Dynamic disks are supported for Windows.  The resulting virtual machine will only basic disks in a hot clone.

  I would just suggest that you make a clone of hot regular and do a slight reduction in the size of the disc resulting (even if it is 1 MB).

  Second, ensure that the system starts out of the c:\ partition and it is marked as a partition active and has a file boot.ini in the root.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• VMware Workstation 11 - connection to vCloud don't Air any displayed VMs?

  Connection to vCloud Air no VMs not posted?

  No Data Center displays, impossible to download?

  Any ideas?

  It was not fixed, I was told it was a bug and would be fixed with the general release

  vCloud Air.

  Support for VMware (VMware Workstation Support, India) me, notifies when this issue has been resolved! (when that date comes, I'll be updating here!)

• Installation of VMWare Workstation on Fedora 20 10.1

  Hello VMWare community!

  So I tried for the past few days to install VMWare on my workstation. I tried both VMWare Workstation 9 and 10, but that didn't work either. The problem is just after installation, when are compilation of kernel modules.

  Here is the log:

  [root@hunt33rsmobilelinux downloads] # cat /tmp/vmware-root/vmware-modconfig-10793.log

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = version 10.0.1 10793 = build = build-1379776 option = output

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: The process is 64-bit.

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Host is the version of Fedora Linux 3.13.4 - 200.fc20.x86_64 20 (Heisenbug)

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / root/.vmware/config ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in root/.vmware/config file. Using the default values.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: PREF cannot verify the permissions for the preferences file.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / root/.vmware/preferences ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: PREF cannot load the user's preferences.

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-root/vmware-modconfig-10793.log

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Created new pathsHash.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.638 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.638 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for vmci module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.

  2014-03 - 01 T 14: 43:20.723 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

  2014-03 - 01 T 14: 43:20.723 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

  2014-03 - 01 T 14: 43:20.724 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.724 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.

  2014-03 - 01 T 14: 43:20.725 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.725 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.

  2014-03 - 01 T 14: 43:20.727 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.727 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.

  2014-03 - 01 T 14: 43:20.728 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

  2014-03 - 01 T 14: 43:20.735 + 01:00 | vthread-3 | I120: must be installed: vmnet status: 0

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.748 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.748 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: Kernel header path comes from FileEntry: /lib/modules/3.13.4-200.fc20.x86_64/build/include

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: update the kernel header path to the /lib/modules/3.13.4-200.fc20.x86_64/build/include

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.837 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.837 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.838 + 01:00 | vthread-3 | I120: Compiler found at "/ usr/lib64/ccache/gcc.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: Got gcc version "4.8.2.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: With the help of the compiler provided by the user "/ usr/lib64/ccache/gcc.

  2014-03 - 01 T 14: 43:20.844 + 01:00 | vthread-3 | I120: Got gcc version "4.8.2.

  2014-03 - 01 T 14: 43:20.844 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: Try to find a PBM adapted for the core "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: No corresponding PBM set has been found for the core "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.853 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.853 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: Temp dir using ' / tmp '.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.870 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.870 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.951 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

  2014-03 - 01 T 14: 43:20.953 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.993 + 01:00 | vthread-3 | I120: The setting for vmnet destination path to ' / lib/modules/3.13.4-200.fc20.x86_64/misc/vmnet.ko '.

  2014-03 - 01 T 14: 43:20.993 + 01:00 | vthread-3 | I120: Extraction of the source vmnet "/ usr/lib/vmware/modules/source/vmnet.tar".

  2014-03 - 01 T 14: 43:20.996 + 01:00 | vthread-3 | I120: Extract successfully the vmnet source.

  2014-03 - 01 T 14: 43:20.996 + 01:00 | vthread-3 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-zXW96r/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.13.4-200.fc20.x86_64/build/include CC = / usr/lib64/ccache/gcc IS_GCC_3 = no ".

  2014-03 - 01 T 14: 43:22.104 + 01:00 | vthread-3 | W110: Vmnet failed.  Cannot run the command build.

  I have tried of course updated everything. yum update is ok, so I'm a bit with no idea.

  So, did you ever find this problem?

  Thank you

  Matthew

  • Fedora is not a host for VMware Workstation/Player-supported operating system.  Note that although not officially supported as a host nevertheless operating system I run it under Fedora 20, but with the stock kernel.
  • I do not think that the 3.13.4 kernel is still supported, even on a supported host OSes.
  • Take a look at: VMware modules & core 3.13