Support of Toshiba and Windows 7

Brands made on day of Windows 7 except for Toshiba.
A must be prepared at the beginning

I'm not agree with you.
I have two laptops Toshiba Tecra S10 and Satellite A300 home. The two laptops are supported for Win7.
I tried Win7 clean installation on laptops and everything works correctly.

Tags: Toshiba

Similar Questions

  • I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application.

    I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application. Help me please!

    For a built-in webcam see this support from manufacturers or their forums.

    You could I think trying a boot minimum http://support.microsoft.com/kb/929135 and see if its then OK

  • Video/DVD Player Toshiba and Windows 8

    I get a response message saying 'your version of the video/DVD Toshiba drive is not compatible with this version of Windows' turn Windows 8 Pro and downloaded the appropriate software on the site of Toshiba for Windows 7 x 64 and ran the software to reinstall the program.

    Any help would be appreciated.

    Thank you

    > Your version of the video/DVD Toshiba drive is not compatible with this version of Windows
    > Turn Windows 8 Pro
    >... to open the software from the site of Toshiba for Windows 7 x 64
    Where is the problem? For me, the situation is clear.

  • Hyperion Planning support for browsers and Windows

    Hello everyone

    I have a question about browsers and Windows that support Hyperion planning.

    Hyperion is compatible with Windows 10?

    Hyperion is compatible with IE 11?

    Hyperion is compatible with Firefox (latest version) 43

    SmartView is heading the bureau 13?


    Thanks in advance.


    Concerning

    MSA

    You will need to provide what version of Hyperion (and Smart View) you are on for people to answer this question precisely as each version is different.

    Your best bet (and should always be your first choice in these issues) is to consult the EPM support matrix

    http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

  • Supported satellite M110 and Windows 7

    G ' Day all,

    I'm trying to help my daughter with her:
    ___Manufacturer: Toshiba
    ___Family: satellite M110
    ___Model: PSMBOA - 01J00D

    Can someone tell me if this model will run Windows 7 and where to find the drivers?

    Thank you

    Pat Garard

    According to Toshiba Australia support page your laptop is supported for Windows XP Home and Vista 32-bit edition only.
    In any case, I'm sure that you can run Win7 on this model of laptop. Many Vista drivers can be used and also older hardware will be installed after updating Win7.

    So to install Win7 and check the Device Manager to see which components of the material must be installed. First chipset Vista display driver and Win7 update utility.

    Just be patient and I think that after several reboots over the components will be installed.
    Test it.

  • How do I increase the memory in my computer, its proximity to full and its all toshiba and windows content especially if im afraid delete it. What can I do?

    My computer is incredibly slow all of a sudden and I don't really have any major programs installed that should cause this. I recently downloaded i tunes and have a large amount of media but cannot imagine to be the only problem. Any advice help greatly appreciated.

    Hello

    You can check the following items and check if it helps to solve the problem.

    Optimize the performance of Microsoft Windows Vista

    How to troubleshoot performance issues in Windows Vista

    You can also read the following article and check.

    Prevention of problems of memory

  • Problems with WiFi from Toshiba and their lack of support - you're not alone

    For those of you out there problems with WiFi on a Toshiba laptop, you're certainly not alone.

    Over the past years, I have noticed a growing number of different brands and models of computers laptop toshiba and laptops with the same problem.
    Last year, 100% of the toshibas that came in my workshop have had this problem, it is about 75% of the laptops that I fixed.

    These models have all hardware wifi (Agere, Intel and Realtek)

    The wifi switch is on, on the same computer, some programs to detect as being market, others see it as extinct.
    What, it doesn't connect to a same wireless router when used to.

    Responses of toshiba were the usual non-professional form response from: it must be the router, try to flip the switch, you have updated the bios?, update the drivers et al.

    It is a software problem, and given the number of people on this forum talking about the same issue, it's a great.

    Often, I came across the issue of windows for communication services wireless disabled by software of Toshiba and I believe, that it is a conflict between tosh software and various other (zone alarm, windows and al.)

    In some cases, the software seems to intervene and to corrupt the OS from windows drivers and interfere with their implementation and enforcement, which is worrying, the software doesn't have to touch all areas. (if not, what is the point of a BONE in layers)

    I sometimes managed to force to work (for example manually restart the services), but these solutions are not a "clean way" of doing things.

    The most reliable way to solve this problem seems to be, backup your data and reformat back to the manufacturer's specifications, and then immediately uninstall the software from toshiba and update the drivers terribly old (even those on the site are about one year more up-to-date for the model I'm working currently on.) Unfortunately most of my clients is companies that need a LOT of data stored in different saved locations, then a ton of programs specialized to be reinstalled, which is slow and costly.

    Message from TOSHIBA:
    Please make it a sticky in this forum for all the REAL solutions, not one of the threads that I watched with your suggestions has been resolved.

    If there is little no support for your products in this regard, I will contact the ACCC, choices, and associations of trade fair with an open letter that I ask all customers affected to sign, and I will put a national call for people with the same problem to come forward.

    I would like to ask also if you encounter a problem where your wifi stopped working and it does not detect or work, please just post "bump" under here so that we can keep way reasonably clutter free.

    I used to recommend Toshiba and Asus for laptops, now, this list is one.

    Greetings from the Australia (aus site sent me here for the forums)

    Damien Holley

    +@lonetraider+
    You can do what you want but as mentioned above; WiFi problems are not specific to a laptop manufactures, you'll notice WLan issues on computers (laptops, desktops computers) all manufactured products.
    I had 4 different books of four various manufacturers and ALL had problems of WiFi, but most problems could be solved by the driver update, change, or reset of the router are.

  • My cursor jumps to the right and cannot use it for games. Have the Toshiba laptop and Windows Vista Edition using Home Premium pack 2

    my jumps to cursor to the right of the page and will move for me when you play as Bejewelled. Have laptop Toshiba and use Windows Vista Premium Pack 2.

    Hello
    You did recently change?
    It is while you use other applications?
     
    I suggest that you update touchpad and display drivers for the cards and check.
    1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. in Device Manager, locate the touchpad, and then double-click the device name.
    3. click Driver tab, then click on set to update driver and follow the instructions.
    4. now Locate Display Adapter and then double-click the device name.
    5. click Driver tab, then click on set to update driver and follow the instructions.

    Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
     
    You can also change the touchpad settings and check.
    To do this:
    1. click on start
    2. click on Control Panel
    3. Select mouse and then check the settings
     
     
    Thank you, and in what concerns:
    Swati Keni-Microsoft Support

  • Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

    Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

    give me the link?

    I need the latest package driver.

    -Thank you

    Please use BC Assistant.

  • Windows 8 upgrade - support for Toshiba laptops models

    Hi community

    If you want to know if your mobile phone is supported by Toshiba win 8 update, please visit this page:

    + The table below lists all Toshiba models by short numbers that are currently supported for the Windows 8 upgrade program. +

    http://EU.computers.Toshiba-Europe.com/innovation/generic/Windows8-matrix

    _ * Incidentally: * _

    If you are looking for specific * Windows 8 drivers * for your Toshiba laptop, visit the drivers of Windows 8 for the upgrade wizard page:

    http://EU.computers.Toshiba-Europe.com/innovation/windows8_drivers.jsp?service=EU

    Welcome them
    Tom

  • "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

    Original title:

    Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

    Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

    Hello

    You did changes to the computer, before the show?

    Solution A:

    For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

    Method 1:

    Check out the following link.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 how to back up and restore the registry in Windows

    Method 2:

    Connect the external hard drive on another USB port and check.

    Solution B:

    For the problem with the help and Support, check if the service is enabled.

    a. click Start, click run. In the Open box, type services.msc and press ENTER.

    b. right-click on the service called Help and Support , and then select Properties.

    c. under the general tab, set the type Startup to Automatic and click Start.

    d. close the services window and check for the issue.

  • Windows Touch - this feature is supported on Vista and XP?

    Windows Touch is supported on Vista and XP?

    No....

  • Open windows help (HTML) and Windows Help and support of the 100... each program file, I opened

    Original title: help and Support.

    Open windows help (HTML) and Windows Help and support of the 100... each program file, I open... I disabled the assistance and support of windows, it did not stop... PL, help me...

    I once formatted the c drive, but it did not stop... It consumes the pagefile (util) and more problem occure... Please help me!

    Hello

    Step 1: Search for the issue in the clean boot state.

    Step 2: Online virus and malware scanner and check.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:

    Using the event viewer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP

    http://support.Microsoft.com/kb/308427

  • Dell Precision 390 and Windows 7 64 bit driver support

    We have a Dell Precision 390 and want to pass this to a Windows 7 64-bit operating system.  Several months ago, I noticed driver support for Windows 7 64-bit for the Dell Precision 390 model but pilot at the moment the site and downloads not support all these drivers for Windows 7.  It seems that the support has been removed.  At best, it supports only Windows Vista 64-bit.  Can someone explain why there is no support driver for Dell Precision 390 for the 64-bit Windows 7 platform?

    Tony

    I have a Dell Precision 390 and Windows 7 Ultimate 64 - bit loaded just fine and it is running.

    It is strongly suggested that you do a clean install.

    So I wiped my HD (after backing up personal files). Don't come to format your drive, I mean totally wipe it.

    Automatic updates will install the drivers you need for any connected device or visit the manufacturers for your drivers.

    So in short, "Don't sweat it".

    Go ahead and download this puppy goes for a few years.

  • Errors in Windows 7 with Windows Help and Support, network connection, and the system restore

    I have a HP Pavilion dv6 (4 years), sometimes overheated with heavy use. Normally I can cool, restart and wear. However, my laptop just overheated and closes, and this time I encounter all sorts of problems.
    First of all, after the reboot, I noticed that the system does not automatically connected to my Wi - Fi (it does not even recognize the available network).
    Secondly, in attempting to fix the network problem, I clicked on the link "Troubleshooting", only to receive the following error message "an unexpected error has occurred. ID of Package cannot continue the Troubleshooting Wizard": unknown path: C:\Windows\diagnostics\system\networking error Code: 0x8007045A

    Third, because troubleshooting did not work, I thought I'd try the help and Support Windows to search for answers. However, when I opened it, I received the following message: "Windows Help and support has encountered a problem. You might be able to solve the problem by restarting Windows Help and Support. If the problem persists, proceed as follows: 1. search the online help on the Windows website.  2. contact your manufacturer of computers or Microsoft Support for assistance. There could be a problem with one or more Windows system files or folders on your computer. "Because I could not connect to the internet, these suggestions and links were useless.

    Fourthly, as I failed to locate the problem, I tried a system restore. However, after he appeared to run (took about 30 min) and restarted Windows, the following message appeared: "system restore was not entirely successful. The system files and settings on your computer did not change. Details: System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore. An unspecified error occurred during system restore. (0x80070005)
    You can try the system restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see what is recovery? "I have disable my antivirus (AVG), tried and received the same error message.

    Short physically all my backup files and restore to factory settings, I think I've exhausted what I can do.

    * EDIT * after scouring the site, I found a suggestion to run the tool via the command prompt System File Checker (see thread here: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/no-internet-connection-on-this-computer-after/83fb22c9-712e-467d-9a68-f8d52dde9bcb), which I did and found some corrupted files. The following response appears: "Windows Resource Protection found corrupt files and repaired successfully details can be found in the CBS.log newspaper... File system changes will take effect after the next reboot. "After restarting, the internet connection problem seems to have been resolved. Service work. and Windows Help and Support also works! I hope it helps someone else!

    Hi Lorenacadi,

    Thanks for sharing of the resolution. Your efforts and patience are highly appreciated.

    In addition to the emission of heat:

    Two things inside the laptop generate heat - power (in the place where the power cord plugged in) and the processor.  The CPU has a heater and a fan to help disperse the heat and keep the CPU at a reasonable temperature.  Hot air is sent on the vents, and air at room temperature between in other events.
    What happens generally is dust forms near the vents, near the Airways within the laptop computer which lead to the mouths and on the CPU fan itself.  All these sources of dust cause airflow slow down, so that the hot air lingers and gets even hotter.  To resolve this problem, you will need to take the laptop apart and 'very good' to clean the dust and the CPU fan.

    Another potential source of heat which would be composed of dust problem might be software related.  More 'work' the CPU must do the most energy is needed and therefore more heat is released.

    Keep us in case you have questions/suggestions more associated with Windows.

Maybe you are looking for

  • Is my content gmail is no longer visible, only the subject line, any ideas?

    My Gmail on firefox shows is no longer the content of the e-mail. I don't see the subject line, and sometimes the first line of the email. I have not changed anything. Have updated my firefox, it makes no difference. I tried Gmail in IE and it works.

  • Skype login screen white

    Thus, as the title says. I had this problem until I was forced to upgrade my Skype. A fully automatic process, in which I had no words to say. In any case, this new version of Skype crashed my system, immediately after that I started and logged. Ctrl

  • What is the best way to move and organize records

    I recently bought a Mac Pro and have bought files across the FRO my windows laptop but what is the best way to organize the files iCloud or local drive and how do I move files in my list of "all files" in individual cases.

  • Mouse transceiver Microsoft ergonomic Sculpt broke!

    Salvation; I forgot to remove the transmitter/receiver for my my laptop Microsoft ergonomic mouse. I put my laptop in my bag with the transmitter/receiver still connected to my PC. I realized that it is broken when I tried to use the mouse and it say

  • Vista Sp2 installation fails with the error ASN1

    When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data  Anyone have any ideas? I tried everything I can think and find on the web or on TechNet.  I even reinstalled the