Support pilot Solution Menu EX

Similar Questions

• xw6400 xw6600 xw8400 xw8600: Trim SSD support pilot solution ESB2 xw workstations

  EDIT: IT TURNS OUT THAT THIS PROBLEM EXISTS IN THE W10PRO64 INSTALL ON HP XW WORKSTATIONS AND PROBABLY OTHERS.  SEE THE MAIN 7/16 MESSAGE.

  I worked on a project to help another Member of this forum, and just made a significant breakthrough related to workstations xw, their storage and support TRIM SSD controllers driver version.  I discovered this when working with Hard Disk Sentinel Pro version 4.60, the free trial version.

  It turns out that the Sentinel program can probe a SSD and see what parts of the usual special OS components for the optimization of the SSD are installed, and especially if DECORATIVE knowledge for the SSD is really at work.  In their FAQ, they explain that the operating system can have the function TRIM supported, but this PAD can actually be disabled despite the operating system having received the appropriate command to turn it on.  This is due to hardware (storage controller chipset is perhaps simply not able to do) or software (the version of the driver for this chipset may be unable, but a newer driver may operate properly).

  I fell exactly this problem of driver and bet that few of us knew that this might be the case.  Xw6400, xw6600 and xw8400 xw8600 workstations that all use the same storage ESB2 controller chipset and the xw6600 I was working on a series THAT SSD Intel 320 returned a response to my probe with Hard Disk Sentinel TRIM was supported but disabled.  Another xw6600 with SSD even reported THAT TRIM has been supported and active.  The first was using ESB2 8.6.2.1315 drivers older drivers and the second was using my 'best' favorite ESB2 drivers 10.0.0.1046.

  I ran the normal TRIM check control on the first xw6600 (DisableDeleteNotify fsutil behavior query) and she came back from 0 (which means the TRIM is enabled in my W7Pro64 OS).  Run the cmd as administrator, using an elevated command prompt.  It turns out that 0 operating system response does not mean THAT TRIM is currently working... it just means that it might work if the hardware and the driver have both were sufficient.

  I then updated my driver storage controllers ESB2 via Device Manager for the 64-bit version 10.0.0.1046, re-directed Hard Disk Sentinel, and now have TRIM both supported and active.

  This is an important finding... goal before, with the ESB2 8.6.2.1315 drivers, I could manually run the TRIM of the Intel ToolBox software, but now the operating system can run TRIM automatically, at regular intervals.  I'm just happy that I had already set on this 10.0.0.1046 defined as my drivers of go - to for clean installs a long time ago.  Those who, moreover, are not what you get the installer of HP DVD.  I got them from Intel.  Target the x 64 folder of the Device Manager for travel it driver update method, assuming you are using a 64-bit operating system.

  Note the arrows below, with 3 photos showing (1) a version clone on a disk of a source image of HARD drive, then (2) a clone of build on an SSD of the source image to HARD drive (with the old drivers) and finally (3) build a clone on a SSD HARD drive (with these new drivers installed) image.

  

  Former pilots and note that Acronis or operating system specific SSD components added automatically:

  

  Now, with the 10.0.0.1046 new drivers:

  

  You can use a trial version of Hard Disk Sentinel to confirm whether or not your SSD TRIM feature works actually automatically operating system and if not then try some new drivers of storage controllers and check again.  I found Hard Disk Sentinel to be rather intrusive, so do not keep not installed other than for this type of test.

  I have prepared a number of HP W7Pro64 xw workstations running the activation of W10Pro64 and stumbled upon the fact that the W10Pro64 standard install places older drivers of storage in the setup controller have been recorded previously in W7Pro64 moved to 'support' TRIM but do not have automatic controlled by regular OS TRIM SSD feature enabled.  It has, instead, been 'disabled '.

  It's one thing to manually run TRIM once a month, but you should really have the OS taking care of this task and do not forget.

  For HP workstations that use the storage controller chipset ESB2 and emulation of BIOS SATA value 'RAID + AHCI' or 'RAID' If this other option is not available (same driver install results, whatever) there is a problem.  I have not studied upward in the ZX00 or ZX20/ZX40 generations yet because they use other chipsets and drivers for this task.  ESB2 chipset workstations include the xw6400, xw8400, xw6600, xw8600, more a lot more HP.

  The W10Pro64 install results in automatically install the driver of ESB2 being 8.6.2.1025 with driver date 10/08/10.  With a Hard Disk Sentinel program detects that TRIM SSD is supported but not active:

  

  After updating the driver for the 10.0.0.1046 more recent version, dated from 13/09/10, the TRIM feature for the operating system has been both took in charge and active:

  

  I found Hard Disk Sentinel a tool valuable, but a little intrusive, so I install only to such experiences and then uninstall.

  Thus, greeting take is the same for these workstations running W10Pro64 it was when they are run under W7Pro64 (see above messages, 1/16).  Update the 10.0.0.1046 storage ESB2 if controller driver version you want as your SSD that will be automatically triggered by W10 for cleaning PAD regularly.

  Who remembers to do it manually?

• "A driver support Solution Menu Ex is not installed."

  Original title : My Windows XP Home Edition displays a yellow triangle with an exclamation point by saying: "a driver support the Solution Menu Ex is not installed."  How can I install it?

  My windows XP Home Edition displays a yellow triangle with an exclamation mark in him saying 'mistake' and a note that ' a driver support the Solution Menu Ex is not installed.    What can I do to install it?

  Hello

  (1) make you a yellow exclamation point in front of printer?

  (2) using Canon printer?

  (3) when exactly you get this error message?

  (4) don't you make changes to the computer until the problem occurred?

  This question appears if you are using a Canon printer.

  I suggest you to find a driver for a device on the manufacturer's Web site and install the latest version.

  How to solve problems of hardware and software drivers Windows XP: http://support.microsoft.com/kb/322205

  Information about the hardware devices for Windows XP drivers: http://support.microsoft.com/kb/319908

  Hope this information is useful.

• How to install the driver supports solution menu ex

  When signing on the computer I got a yellow triangle with an exclamation point in him saying: "a driver that support Solution Menu Ex is not installed."

  How do I install it and where can I find?  I am not connected to a printer.

  Hello

  -For how long have you had the problem?
  -Don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  Remove the external devices connected to your computer except keyboard and mouse and check if the problem persists.

  Step 2:

  Start your computer in safe mode and check if you get the error message.

  See also:

  How to solve problems of hardware and software drivers Windows XP: http://support.microsoft.com/kb/322205

  Information about the hardware devices for Windows XP drivers: http://support.microsoft.com/kb/319908

• Why hasn't MX320 Solution Menu scan option

  When I initially installed my MX320 in Windows Home Premium, I installed the Menu Solution and used successfully to scan documenets and back up the files on my computer for several years. After my mother destroyed auto map, I put together a new computer with a hard drive completely blank (no residual programs). I have re-installed the mx320 using the original drive and now the menu takes has no scan option to choose from. I tried to download the software and drivers absolutely without success. Is it possible that the installation of the 'real' Solution Menu is limited to the original installation?

  I also unsuccessfully scanning for the PC by using the control panel of the printer. He goes into a long "Please wait a moment" and poster possibly 'sleep scan PC' forever.

  I know that these issues were discussed in detail with any forthcoming solution. My solution is to replace the printer but for sure not with a gun.

  I contacted Canon Support and got a response in less than a day. The problem is that you must download MP Navigator to your system in addition to the Menu of the Solution. I did this and a Scan biutton appeared in the Soluion Menu. The scan function worked as before.

• Solution Menu EX will not install after uninstalling

  My Canon MX882 all-in-1 would not go online last night. I ran the Wirless easy install the printer to make sure it was on my wireless network and it connected. The prinbter still showed offline in the printer status.

  I have unintslled all the sofeware Canon and drivers and all have said that they unintslled. I restarted and went through install it. Just what I instaklled appears, except Solution Menu ex it does not appear in programs and features, but when I try to install I get the message "a new version of the Canon Solution Menu EX is already installed. This installationb is cancelled. »

  How to force a reintsll or remove asnd cleaning the partially installed Canon Solution Menu ex

  This isn't earthshattering for me. I have a new laptop on the way and will reinsatlling everything on it. But it would be nice to install Solution Menu EX for now on my old computer.

  Short of reinstalling Windows 8.1, is there an easy way to get this problem fixed?

  Somne software providers offer a cleaning program to completely remove their products, just for a problem like this. The rationale for barrel of chance?

  I downloaded and install 3rd party software that is supposed to do, but they could not find Canon Solution Menu ex

  I met the same problem during the installation of the drivers from Canon and the software on my new PC. I uninstalled the Quick Menu of Canon Solution Menu EX installed. I tried to install quick menu and he told me that it was incompatible with the Solution Menu ex

  I went back and read the info about each feature and found the warning in the Quick Menu to say it can uninstall Solution Menu EX before installing the Quick Menu, but it doesn't have a warning in Solution Menu EX info.

  As Solution Menu EX was the feature of not install it, I read his information and that he had not seen any incom [atibility with Quick Menu. The warning message that Solution Menu EX is already installed is incorrect and confusing. It would be nice if the message had an extra warning that Quick Menu is incompatible with the Solution Menu ex

• solution menu ex is not displayed when the application is started

  I reinstalled my drivers and Canon MG5320 software several times, and the Solution Menu EX nor the MP Navigator EX 5.0 screens appear with the starting of applications. I have no way to change the destination for my scanned image file.

  The solution I was looking for is described here: http://justinsmind.wordpress.com/2010/09/18/mp-navigator-ex-not-running-correctly-with-windows-7/

  The problem was a leftover Dell all in one folder in the twain_32 folder. After removing the old Dell files, properly installed Canon software.

  This looks like a problem faced by many users.

• What is the difference between the center of HP, HP Advisor, HP Support Assistant solutions?

  I'm getting confused with all the software that provides HP.  Above all, it seems useful, but...

  A kind of host with HP Advisor HP-style began to appear on my system windows 7.  I don't think I want.  If I do not need, how I stop it all to appear?  Should I run adviser or Assistant to the support for the maintenance of my laptop HP Pavilion PC?  Is for my Photosmart C4580 HP Solution Center?

  HP Advisor monitors the integrity of the system and allows easy access to troubleshooting solutions. HP Advisor also displays information of the computer, including the details of the guarantee and the connections to devices, such as printers.
  http://support.HP.com/us-en/document/c01969885

  HP Support Assistant is a utility that contains a set of diagnostic and repair tools that you can run any time your computer is not working properly. The HP Support Assistant is integrated with the help and Support Windows utility to provide support documents and access to the Microsoft and HP tools to perform regular updates, help prevent potential problems and provide information valuable system to solve your computer problems.
  Most of the known hardware issues driver and software can be solved by running the HP support Assistant. HP recommends you run the HP Support Assistance maintenance and troubleshooting tools before calling HP Support for technical assistance.
  http://support.HP.com/us-en/document/c01916574

  HP Solution Center is the main software which allows you to control and maintain your all-in-one printer. The program is part of the software package and the driver complete features and cannot be downloaded separately. HP Solution Center acts as a central point of access for tasks such as scanning, printing and copying, and also allows access to the following features:
  Parameters of the product (for example, the analysis and print settings)
  Product help and troubleshooting
  Links to the purchases and supplies
  Other HP software (such as photo editing software)

  If you printer Photosmart C4580, take the HP Solution Center.

  I recommend that you have installed on your system HP Support Assistant. You can uninstall HP Advisor if you do not want. If you want to disable it to load at startup, here are the steps:
  1. click on the settings button in the bottom right corner any page of HP Advisor.
  2. on the general tab, remove the check box control launch Advisor PC Dock at every start.
  3. click on apply.

• Is Adobe Reader for iOS and Android Support with Solution PKI encryption?

  Hello

  I searched for an answer if Adobe Reader for iOS and Android can read PDF files encrypted by infrastructure solution to public key (encrypted by a public key, in order to be decrypted by the private key pair), but to date I have not found the answer.  From the Adobe web site, I understand that Adobe Reader for Android supports to read a document encrypted with AES256 but it does not mention on PKI.  I had to guess it does not support encryption with PKI, but I would just get a formal response and would like to know if Adobe Reader Mobile will support it.

  Thank you!

  Masaya

  Unfortunately, it is still not supported on mobile versions of Adobe Acrobat DC.

  Thank you.

• Support software solution Center

  Printer in question runs great.  Connected wireless to all devices & large prints.

  Problem is with it not appearing on the Solution Center.

  Have 4 HP printers connected.

  3 appear on the Solution Center program & can interact with the 3.

  Last printer I bought was installed by mode but not FACT NO appear on the Solution Center of the screen.  The result is that solution Center does not interact with it.

  Why this might be happening?  Too many printers?  I tried to remove printer software & put it back, once again, but has not fixed the problem.

  Suggestions?

  Hi @ohrw03

  The Deskjet 3510 uses software version 28.8, which means that it wil not see the Solution Center. Instead, you can look like an icon that looks like your printer on your desktop and open it to start the Printer Wizard, or open all programs > HP folder > search the 3510 it and select it.

  If you can't find it, please download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer.

  This will ensure that you have all the software installed for this printer.

  Another way to open the Printer Wizard is to go to printers and devices, double-click your printer and choose HP printer Assistant there;  (another printer, same idea)

  

  Please let me know if that fixes the problem, thanks.

  Notes; When you open the Printer Wizard, it will look something like the image below;  (another printer, same idea)

  

• How can I get my help and support in my menu start to start so I can use it? one of the tech told me that I had to reinstall the exe file, but it didn't help me find to reinstall the file.

  My help and support does not come to the top in my xp home computer. If I need to reinstall the program exe file, I can find to operate here? It is not on my computer.

  Hi Rex-36

  You can consult the services to see if the service is running. Click 'Start', click 'run' and in the Run dialog box, type "services.msc". On the page that has ensued, scroll down to "Help and support" and right click. Select 'Properties'. .  Look to see if the service is running and if this is not the case, click on the button to start the service. In the box "Startup type", make sure that it is in the type of start "Manual" or "automatic" . Click 'OK' and exit.

  I hope this helps.

• Support HP Solutions Framework - 11.51.0049.msi

  Still problems with my Officejet 7210. I completed all the steps very well, but the final when I download/install framework, it STILL hinders is looking for this doggone .msi file.

  Hi there vulcelt,

  I don't know if you are running Windows 7 64-bit or 32-bit however, please check to see that you are running, and then I would say either by the Hotfix Microsoft tool here if you have 64-bit, and if you're running 32-bit, you can try CCleaner to help repair the corrupted in your operating system files. If you have a different registry cleaner that you use normal or prefer, try and let me know if it helps.

  Good luck!

• How to restore the system to this day erlier and how its help and support on the start menu

  How to enable help and support in the menu Start menu, I need to do system restore, but I get a popup saying enable h & s

  Hello davidheier,

  Click Start, run and type SERVICES. MSC start the help and Support service.

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Remove/hide help and support on the start menu.

  Original title: IS NOW MICROSOFT HELP AVAILABLE online?

  NOW I NEED MY HELP AND SUPPORT OF THE MENU START.

  PLEEEEASE CAN SOMEONE GUIDE ME?

  Hi Mastressa,

  Thanks for posting your question on the Microsoft Community Forums
  I understand from the description of the issue, that you want to delete/hide help and support on the start menu.
  Let me go ahead and help you with the issue.
   
  Are you facing problems with the help and Support?
   
  I suggest you to follow the link to the article "to remove a program from the start menu icon" and check if it helps:
  Customize the start menu
  http://Windows.Microsoft.com/en-in/Windows7/customize-the-start-menu
   
  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• is "driver support" a company is legitimate

  I received a notice of 'support pilot' that I have 20 obsolete drivers and offering a solution if I save & pay a fee. Is - is this legitimate?

  Hello

  Please ignore and run a malicious software removal tool to clean it properly. Please try the following:

  www. Malwarebytes.org/Download

  Kind regards.