Supported encoding Types javafx.scene.media package

Similar Questions

• call a procedure of package DB type complicated if the type defined in the package itself

  Hello world

  I use jdev 11.1.1.7.0

  I defined a package of data with a procedure and internal two types as follows:

  Create Or Replace Package Db_Package As 
  
  Type rec Is Record(Rec_Type Varchar2(10), Rec_Desc varchar2(10) );                        
  Type recordList Is Table Of rec;
  
  Procedure Test_Procedure(p_out out recordList);
  END db_package;
  
  
  

  evil

  I want to call this procedure in the module of the application. I know how to call a procedure or function db AM,

  but in this case that I've defined two types in the package itself and I use one of these types as to the procedure output parameter, I had a problem.

  below is the example of code to call the db procedure, but it does not work because the plsqlBlock.registerOutParameter () setting will not

          CallableStatement plsqlBlock = null;
          String statement = "Begin DB_PACKAGE.Test_Procedure(:1); END;";
          try {
              plsqlBlock = getDBTransaction().createCallableStatement(statement, 0);
              plsqlBlock.registerOutParameter(1, OracleTypes.ARRAY);// it doesn't work
              plsqlBlock.executeUpdate();
              Object object = plsqlBlock.getObject(1);      
  
  
          } catch (Exception e) {
              e.printStackTrace();
          }
  
  
  
  

  I know that if I set the types of packets (rec, recordList) as types of oracle (instead of setting in the packaging itself) so I can call the procedure with success, in this case I should use below:

  plsqlBlock.registerOutParameter(1, OracleTypes.ARRAY,"Recordlist");
  

  but I wonder how you can call a procedure from the package if the types defined in the package itself.

  Kind regards

  Habib

  JDBC supports the types of oracle level package only from 12 c database and jdbc driver ojdbc7 (which requires java 7).

  Dario

• In the opening different file types that Windows Media Player opens indicating does not support the file type or the CODEC. Why? Help, please!

  AT THE OPENING OF THE DIFFERENT TYPES OF FILES WINDOWS MEDIA PLAYER OPENS INDICATING NOT TO SUPPORT THE TYPE OF FILE OR CODEC. WHY? Help, please!

  If you try new types of files that WMP is not pregnant then it will warn you that they only peuvent malfunction.

  I got when I started to use video files to .ts format - he warned me, and then I told him to go ahead & try anyway, so he did and they worked.

  If say you your WMP to try to use the format, then you can include the results in your response to the request of zig - zag for more info - make sure to specify what types of files they are.  Note the messages you get from WMP because it will give more information that just what file extension are files - video files can be, for example, the extensions of files .ts taking video & audio formats of all kinds such as mpeg2 or mpeg4 & mp3 or ac3.

• Cannot display UTF-8 in javafx.scene.text.Text text

  I'm unable to display text (read a txt file with encoding utf-8) in a text component javafx.scene.text.Text. It comes as an undesirable character. However, this text is visible when it is defined as the scene title. No idea how to show Indian languages in JavaFx?

  You load and set the police appropriate for text?

  Font font = Font.loadFont(LabelCustomFontTest.class.getResource("TRON.TTF").toExternalForm(), 10);
  Text text = new Text("TRON");
  text.setFont(font);
  

  BIDI text is not supported. Is it a two-way police?

• Media packaging error! HTTP request error

  Hello

  I get "error media packaging! HTTP error request"while Adobe Flash Access Manager packaging media. I tried the suite option.

  1-single flv file & single folder

  2 - change watch folder interval between 60000 and 6000.

  

  I get the following error in the tomcat log file (localhost.2013 - 10 - 01.log).

  October 1, 2013 17:04:18 org.apache.catalina.core.StandardWrapperValve invoke

  SERIOUS: Servlet.service () for servlet UICommunicator threw the exception

  java.lang.ClassCastException: com.adobe.flashaccess.core.media.drm.pro.flv.FLVMediaType_Ext cannot be cast to com.adobe.flashaccess.core.media.MediaType

  to com.adobe.flashaccess.sdk.media.drm.MediaProcessorFactory. < init > (MediaProcessorFactory.ja goes: 45)

  at com.adobe.flashaccess.sdk.media.drm.MediaProcessorFactory.getInstance (MediaProcessorFacto ry.java:58)

  at com.adobe.flashaccess.sdk.media.drm.MediaProcessorFactory.getMediaProcessor (MediaProcesso rFactory.java:81)

  at com.adobe.flashaccess.sdk.media.drm.MediaEncrypterFactory.getMediaEncrypter (MediaEncrypte rFactory.java:44)

  at com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer.packMedia (RefImplPackagerSer ver.java:333)

  at com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer.packFolderMedia (RefImplPacka gerServer.java:269)

  to com.adobe.flashaccess.refimpl.userinterface.UICommunicator.packageSingleMediaFolder (ICOM municator.java:1354)

  at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost (UICommunicator.java:131)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)

  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 583)

  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)

  at java.lang.Thread.run(Thread.java:724)

  Help, please!

  Thank you

  Hello

  A few questions:

  1 has already been able to use this tool in the past?  If Yes, it will help to know what changes caused this error to occur.

  2. If you get stuck and need as soon as POSSIBLE, we also provide tools of command line with many more features than this user interface tool - please take a look at AdobePolicyManager.jar and AdobePackager.jar.  This document has instructions on how to use the tool: http://www.adobe.com/support/flashaccess/pdfs/FAXS_3_0_ReferenceImplementations.pdf

  3. If you are a developer, we actually provide the source code for the package manager - you can debug in the RefImplPackagerServer class to see invalid applications valid vs

  see you soon,

  / Eric.

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• Need help! This version of Windows does not support this version of Windows Media Technologies.

  I got this error message when I tried to install Hotel Giant 2. Don't really know what to do... Pls help! Contact Microsoft Corporation support This version of Windows does not support this version of Windows Media Technologies. This product, which was created by Microsoft Corporation, has been blocked from running because it can prevent your computer from starting correctly in the future. Recommendation

  Hi Dot77,

  Thanks for posting on the Forum of answers.

  I suggest to download the patch from the site Web of Nobilis.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What are all the extensions &#62; types for windows media player files

  What are all the extensions > types for windows media player files?

  Open Windows Media Player and go... Tools / Options / File Types tab...

• The subsystem needed to support the type of image is not present.

  Virtually all of the programs on my computer will start is no longer.  I get the following error:

  C:\Program Files (x 86) \ "follow-up to program details.

  The subsystem needed to support the type of image is not present.

  This includes Sonos Desktop, LogMeIn, Norton 360, Microsoft Office 2010, Windows Live, etc, etc...

  I can't find any report of this error online before.  It seems that this has started after a Microsoft Update.  Microsoft Recovery cannot restore to a previous point.  I get a reply that she has failed possibly do for an antivirus program.  Uninstall Norton does not start because of problem initially registered.

  All thoughts,

  Thank you

  Hello enthusedmass,

  Thanks for posting on the Microsoft answers Forum.

  You might see if you have corrupted system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Restart your system

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Please answer and give us an update on your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Photo Viewer does not support the type of file or must be update error

  I can't open some files. They say the picture Veiwer only market not supported file type or must be updated. Where can I get help with this? Or you can change the file type to a file supported by wild poliovirus?

  Try to install Windows Live Photo Gallery that supports different image formats.

  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started