Supported HP Driver Updates

When I go to HP & website support download drivers, it shows this long list of updates. Does only show the updates that I need like Windows updates or it shows all updates driver for my computer even though I have them already? I had HP updated active all the time.

HP Customer Care Web page for your model of watch always all updates for your model regardless if they are installed or not.

HP Support Assistant installed on your system will extract only the updates needed to your system depending on the version of the driver installed on your system.

Tags: HP Desktops

Similar Questions

  • Support and driver updates on the Satellite P500-15F and Nvidia GT 330 M

    Hello all and thanks in advance for your help.

    First of all, I wonder if the toshiba support center works for all products... try again with 'satellite', P500 and you find not 15th!

    He continues with Toshiab Tempro... I can't validate my serial number...

    However, I wanted to update my Nvidia GT 330 M driver to the latest version 314.22 but can't fnd any info on the OEM driver...

    Best regards and good luck to everyone!

    >... try with 'satellite', then P500 and you will find no 15th!
    On this forum, you can find hundreds of threads with the same question and the same answer: to find your model, you must choose the short model number and not this part of the model name. THERE

    our P500 a short model number * PSPGSE * please visit Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp and check it once more.

    Latest drivers will be there. I have the model PSPG8E, original use Toshiba driver and don t have still no problem with video performance.
    You have a few problems with the performance?

  • 4K @ 60 Hz fichier_ecriture deleted on the bootcamp driver update?

    Hello, I currently have a 2015 Macbook pro with a M370x AMD 10 under bootcamp with the graphics driver 6.0 Windows Update installled.

    I am running a LG 27UD68-P on the mini display port with an adapter Club3D HDMI 2.0.

    This will run out 4K @ 60 Hz very well on Mac OS X and same bootcamp without updating to 6.0 graphics driver was last updated.

    Now that I've updated, my refresh rate is only limited to 30 hz, even if AMD Radeon is the maximum resolution supported and the refresh rate is 60 Hz 4K.

    I've updated the graphics card drivers previously using the method of unofficial workaround for the AMD driver version, but I re-installed Windows since then and you just want to know if it is possible with the latest updated version? If this is not the case, what would be the next driver update be scheduled for possibly?

    Thank you.

    No one on the CSA can provide you with a date.

  • now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

    Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

    Here are the current models of Brother products which are supported.

    http://support.brother.com/g/s/ID/OS/Macintosh.html

    If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

    Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

  • 15 Pavilion: Pavilion Windows 10 Driver Update quick access keys

    Hi people!

    The "SHORTCUT KEY" that towers power button has a small RED led installed which is supposed to light up when you press on to show that the speakers are turned off, however after an update of the Lord knows what, like Microsoft to preserve 'secret' is now to win 10 updates and get it if you want it or not, the RED Led has stopped working which I hope is a software problem that can be solved by installing the latest version of the driver HOT KEYS so...

    Using the "HP Support System" the "Robot" told me to go on the Support Page, get my model of laptop recognized then choose updated driver and select "HOT KEYS", except when you get to the drivers there is nothing that looks remotely "HOT KEYS DRIVER" in the list of all driver updates.

    Does anyone know where this "object", or what I should expect for HP Support human out of bed on Monday morning and answer the question?

    I hope the people of HP who put the "How To" pages would check them until they commit to their Web pages!

    Thank you

    Life is a journey, not a destination so make the most of it so that you can!

    Hi again,

    After completing the steps gave you me and the Chipset driver and then, installation by running the installation Realtek in Administrator Mode. For some reason, I found myself with a Microsoft HD Audio Driver installed, which do not operate the RED Led!

    Then back through everything in your instructions for the second time, but the Chipset driver is back with an intallation error, so I just ran the Realtek sp73189.exe.

    For some reason that gave me a message telling me when I had done was no installed Audio driver!

    I then ran it again and after re-boot Led RED rest would not work, so I went into Device Manager and see "Update Drivers" offered that I stressed the Realtek HD Audio, and I was rather surprised to see that there is an update as of 26/01/2016 6.0.1.7730 driver Version.

    It was automatically installed and left for a few minutes, then low and here are the RED Led which is now "glowing" Fortunately started working again.

    Know not why the first two 'impossible' attempts or if the Realtek sp73189.exe had been replaced by yet another update, but at least now everything is going well until Microsoft eventually make another 'Dump for update' secret and screw something else!

    See you soon

  • The TOSHIBA for Bluetooth ACPI driver update failed

    Hi all

    I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

    When I tried to download the latest version of the driver it says that I have the latest version of the driver.
    He also says that the device is functioning properly.

    It does not recognize my S4 where before he did.
    I now can not get it to pair because he does not see.

    When I did the last update of MS that I noticed the results put BT update failed, as shown below.

    Any ideas on a fix would be appreciated.

    The TOSHIBA for Bluetooth ACPI driver update
    Installation date: 08/08/2015-09:37
    Installation status: failed
    Error details: Code 80246005
    Update type: recommended

    This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

    More information:
    http://sysdev.Microsoft.com/support/default.aspx

    Help and Support:
    http://support.Microsoft.com/select/?target=hub

    BT is activated using the function keys?

    What is the status of the Bluetooth technology in Device Manager?
    You see errors, some yellow exclamation?

    What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
    No doubt this has problem of BT

  • 14 - n204sf Pavilion: Pavilion 14-204sf has an AMD graphics card but driver update for a nVidia

    Hi, in my attempts to find a solution to my problem with the current for my Pavilion 14-n204sf graphics driver, I found on the web from the list of available drivers HP site in which the graphics driver is a Nvidia card in the machine is an AMD Radeon 8670 M as shown in the master database and reported in the control panel of the machine. What is the reason for this discrepancy? Do both adapters use the same driver or is this just a mistake - and in this case, where is the Radeon driver?

    Thanks in advance for your help.

    Hi @jlb21,

    Thank you for your inquiry.

    I understand that you upgraded your system to Windows 10 now looking a driver updated for the AMD Radeon 8670 M and there is not a list on the page of software and the driver for your model.

    If this does not work, you can try to install a driver on the AMD website, but can find that you do not get the same options as before.

    Drivers + download - drivers & Support AMD Center

    You may consider contacting HP support for assistance or perform recovery to factory.

    HP computers - performing a recovery of HP (Windows 8) system

    If you decide that option and that you don't create recovery media, you can get a kit of HP support recovery.

    Contact HP to Contact HP Support assistance

  • Intel GMA graphics driver update on the Satellite Pro U series

    I want to upgrade my graphics accelerator driver that is Mobile Intel 4 Series Express Chipset Family.
    On the Intel website, I found this accelerator and new driver for Win XP OS that has been released 31.3.2009, its version is 14.38.3.5047.

    Although I can not install it because this driver is not verified by Toshiba and the site Web of Toshiba is the driver who is one (of course I have it) year old. So, is a way to install the new driver from Intel or can you please this verified driver?

    BTW, if the latest drivers are more than a year, it does not resemble the good support.

    Zdenek Konecny

    Hello

    I m using Intel drivers too and I n t have a problem to install.

    If you have tried to install the driver through setup.exe, you should try manual in Device Manager. Right-click on the graphic card > driver update. Use the Advanced installation step and choose the driver directory yourself.

    Before installing the driver, you must remove the older version first, and then restart the laptop.

    Good bye

  • Qosmio G50 PQG55A: NVIDIA driver - update or not

    Hello

    Thanks in advance for anyone who can help.

    The short question is, should I update my NVIDIA driver from 175,90 (as shown on the Web from Toshiba site) to the Version: 186.81 WHQL as suggested by the NVIDIA site.

    The long version follows...
    My Qosmio G50 (PQG55A-04J01Y), running under Vista 64 Bit, crashes intermittently. It is sometimes good for more than a week earlier, sometimes once or twice a day.

    I was quite thorough with virus and malaware controls.

    Everything seems to stop, even if the mouse still works.
    I have to turn off the PC, sometimes reboot Check Disk runs and corrects errors.

    Windows Problem Reports and Solutions comes with the following:

    ------------------------------------------------------------------------------------------------------------------------

    A problem with the NVIDIA graphics driver
    NVIDIA Graphics Driver has stopped working properly.
    An update of the driver, as appropriate, could prevent this problem does not happen.
    There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

    1. search the optional third-party updates
    2. try to manually update the NVIDIA Graphics Driver
    3. check the NVIDIA Corporation Web site for driver updates
    4. check the Web site of the manufacturer of your computer for driver updates

    If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

    How can I find the manufacturer of my computer?
    How to upgrade manually a pilot using a file downloaded?

    1. updates of Windows are perfectly up-to-date.

    2. when I try to update driver I get the message;
    + Windows has determined the software driver for your device is up to date. +
    However...

    3. when I use the NVIDIAs tool to automatically search for updates, I get the following:

    NVIDIA driver downloads
    Product

    NVIDIA GeForce 9600M GT
    Current installed Driver * 175.90*

    Driver was last updated
    Computer laptop version 186
    Version: * 186.81 WHQL *.
    Release date: August 27, 2009

    He said also;

    + The program driver NVIDIA Verde Notebook, this is a reference driver that can be installed on laptops NVIDIA GPU. However, please note that your computer laptop OEM (OEM) provides drivers certified for your mobile specific on their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. OEM may not provide technical support for the issues raised by the use of this driver. +

    5. but here on the Toshiba site he says nVidia NB9x Display Driver true display VISTA 64 Bit 18/05/2009 7.15.11.7590 51,35 MB

    That is to say, the driver I have already.

    So... should I install the latest driver or not?
    If not, is there anything else I can do?

    Thank you very much for reading all this and thanks in advance for any help.

    See you soon

    Steve

    > Short is, devrais I update my NVIDIA driver from 175,90 (as shown on the Web from Toshiba site) to the Version: 186.81 WHQL as suggested by the NVIDIA site.

    Generally, you must use the graphics driver downloaded from the Toshiba driver page.
    The graphic card driver from the Toshiba page has been tested and it s certified by Toshiba.

    The common graphics driver nVidia is not designed for laptop and that's why these drivers don't support a protection against overheating.
    Driver Toshiba done!

    So using the page nVidia graphics card driver can be risky and could overheat your GPU so the use of 3 third-party drivers is always at your own risk!

    I have thin you should stay with the driver from the Toshiba page

  • Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

    I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

    The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

    Human Interface Device: Bluetooth Remote Control (works)

    Modem: Modem Standard via a Bluetooth #2 link (works)

    Network cards (all working correctly):

    Device Bluetooth (personal area network)

    (Heading RFCOMM Protocol TDI) Bluetooth device

    (and my other network devices, all functioning properly also)

    Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

    I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

    I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

    Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

    Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

    Any help would be greatly appreciated.

    I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

    There were these problems:

    1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

    (2) my phone under Bluetooth devices could connect but would not photos transfer.

    (3) neither my helmet Bluetooth would not work.

    The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

    For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

    If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

  • HP Jet 13-c020na (touch): Hp driver update recommended

    I have a recommended driver update Support Assistant (latest version), who was able to install. Can someone please?

    Intel driver customer thermal and dynamic framework.

    In the device under Intel (r) platform dynamic and thermal management framework there are five items listed and all pilots are presented as the best driver software installed.

    Advice on how to proceed would be appreciated.

    Thank you

    L

    Thanks for the last answer. I fear, I really don't understand what you advise, but I'll settle this as an end to this post.

    Since then, I talked to Hp support that now suggest the reason for which was that the driver was not installed because Hp 13 flow doesn't have enough memory. Make sure that what you want, but I think I went now as I can with this problem. I'm reinstalling w8.1

  • HP Pavilion x 360 Convertible: the Intel HD graphics driver update fails to install

    Hello

    I got my new laptop for Christmas and a few days ago, HP support assistant told me that there was a Version "Intel high definition (HD) Graphics Driver Update": 10.18.15.4281Ep3. I downloaded the updated, but after that 4 attempts trying to install via HP support assistant I kept getting the same message "installation failed." Then, I went to my downloads through Explorer of files and found the downloaded file. When I click on the file it takes me to the Setup Wizard and I can start the installation, but about 2/3 of the way if the installation I get the same message "the process cannot access the file because it is being used by another process" and then the installation completes without completing. I'm not sure how to find out which process is using the file or how to do the complete installation so I would really appreciate your help.

    Thank you very much, Rich

    Hello

    Follow the steps below to uninstall the driver:

    1. Press the Windows key + R
    2. Type devmgmt.msc
    3. Press Ok
    4. Right-click on the graphics card and select Uninstall
    5. Restart the computer

    After the computer restarts, run the Windows Update and the last update will be installed.

  • The Intel HD Graphics driver update

    I have a HP Pavillion laptop g7 with Radeon HD 6470 M. graphics card I've been invited to udate the graphics driver with HP assistant. I downloaded 3 times and each time it will not be installed. When he gets to the part of the installation, it gives me a warning that my internet security is turned off, and then gives me a failed installation. If I go on the AMD website to get the update, he said I have to do it from my laptop manufacturer. Anyone know why I can't install this update?

    Hello:

    You can ignore Microsoft updates or ANY update (from HP, Microsoft or AMD) for Intel video on your PC.

    The only factor that you can install on your laptop's driver AMD support for your laptop and driver page, which also installs the Intel video driver.

    The problem occurs because these automatic updates don't know that you have switchable graphics and it detects an older version of Intel video driver and wants to install a more recent version.

    The problem is the AMD driver on your PC support and driver page only supports the older Intel video driver and try to install will not work either or will mess up your video.

    No more, you can use any driver directly from AMD. None of those who have the necessary Intel driver for switchable graphics to work.

    So you can hide the update, ignore the update, some adjustment, you must choose to not see or install it.

    If you see a HP update specifically for AMD/Intel switchable graphics in your laptop computer, you can install that.

  • Pavilion g6-2002au: USB driver update failed

    I did a periodic update of the system on the laptop drivers.  The last time, I remember it was almost 2 years ago.  And this time I encountered problems.

    This topic follows my request on this thread about SafeMode start/restore after a driver update failed:

    http://h30434.www3.HP.com/T5/notebook-boot-and-lockup/booting-safe-mode-on-HP-G6-2002au/m-p/5690028/...

    And as I said it I begam making one an update to pinpoint what caused the original problem with the bulk update.  After 7 by an updated driver, I found the (or, at least) a cause of the problem.  The following image, 2 PCI to USB host drivers caused an error message from windows after the update.

    There are 6 USB drivers linked to this very old/aged list and clear terms the number of items of equipment installed on the laptop.  See this screen shot of the Device Manager list:

    Drivers USB 6 update, I have taken these 2 items to be updated first because 1) they seemed to be the oldest (replacements were dated in 2010), and 2) if I understand technology, these bits connect the processor to host chip and the actual hub bus.

    I chose just these 2 PCI-drivers for update (unchecked the selection for all other boxes in the recall list) and proceeded.  When the installation has ended a windows message box reported an error of windows to one of the devices (one, not declared or referenced by a number).  Considering that the originals had worked for years without apparent problems, I started a process of restoration.  It worked, and restored 'very old' pilots work again without any error boxes, while the most recent have not.

    This is a screenshot of the restored Details of driver (work), which seem to be the original objects from Microsoft for XP3. Vista and windows 7

    Any ideas why this (the driver update failure) happens?

    Davidk10

    @Davidk10

    There is no update from HP, the prograns you are using is not supported by HP.

  • HP Pavilion 15 laptop: amd driver update after that upgrade from win 10 leads to the boot failure.

    I have a HP Pavilion 15 laptop.

    After I my windows 8.1 upgarded to win 10 and decided to update my graphics driver amd, after the installation of update to the course to restart commissioning hangs at the hp logo (sometimes to start startup repair, then fails).

    This only happens on this specific driver update... do not update this driver translates by "display driver stopped working / crashed and now has recovered" message.

    is this a problem with the update of the driver or I can't use this update in win 10?

    Hey @AnjaneyaAnand,

    Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

    For starters I would say that the HP Support Assistant running.

    Here are some useful links for the HP Support Troubleshooting Wizard or by downloading the latest version:

    HP Support Assistant

    HP computers - using HP Support Assistant (Windows 10, 8, 7)
    With the help of HP Support Assistant (Windows 7, Windows Vista)
    HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)
    HP PC - troubleshooting HP Support Assistant (Windows 7)

    I highly recommend to run the Windows Update tool that it can find and update all the old drivers or missing you need.

    Please hold me.

    By pressing the Thumbs Up button below, you can always say thank you!

    See you soon,.

    TechSurge.

Maybe you are looking for