Supprised to find that answer BPEL does not complete the process

Similar Questions

• BlackBerry Smartphones BlackBerry support insists that STV100-1 does not support the China Mobile HK?

  Then I go to Hong Kong right now with my Priv, using a prepaid of China Mobile Hong Kong that I've used with my classic. Noticed that I can not make calls with it so I called BlackBerry charge to open a support case.

  I noticed two things:

  -I am able to receive a 4G signal

  -Whenever I make a call, network goes to no Service. I also can't find any network if the phone is set on 2G or 3G only

  -I can not receive calls, it keeps saying number not reachable, as if the phone was turned off

  -In the phone app, my number is listed as unknown.

  After a lot of troubleshooting with the support rep, she argued that my private does not support the China Mobile HK, which doesn't seem wise. I'm temporarily using the card with a backup of Telus/Koodo G4, while my private does not work, and it works fine.

  Priv STV100-1 supports:

  • FD - LTE 1, 2, 3, 4, 5, 7, 12, 17, 20, 29, 30
  • HSPA + 1, 2, 4, 5/6, 8

  H812 G4 Telus LG support:

  • FD - LTE 2, 4, 5, 7, 12, 17
  • HSPA + 1, 2, 4, 5/6

  China Mobile uses UMTS and LTE 3/7 1/8. This is why don't the Priv actually be MORE supported? I ' n suspect a hardware issue yet I can't seem to convince management of the case.

  Okay, BlackBerry RMAing my device now, so I guess that's it.

• I use gmail and some emails that I receive does not show the graphic or image only a small graphic icon.

  I use gmail for my email. Some of the emails that I receive does not show the graphic or photo. I can see the photo/image in Internet Explorer, and when I hit the reply in Firefox. This started happening about 5 months ago. I used to be able to view e-mails without any problems... I checked all options and have display images enabled. This happens with every email from a yahoo group and a few other emails as well. I have the latest version of Firefox. I tried uninstallng and reinstall firefox... no change.

  This has happened

  Each time Firefox opened

  == There are about 5 momths

  Thank you.. I ended up working... followed all your advice and the closure of all add-ons... are working! r

  Better gmail also seems to be a problem

  I appreciate your help.

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• The Task Manager does not display the process and tabs, even if the menu can be seen.

  Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.

  Here is a link that you can see a screenshot on my problem.

  http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG

  Thanks in advance for your help

  Original title: Task Manager problem

  I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
  Deleted it and the work of all the graphical interfaces as it should.

  Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.

  Kind regards
  Laszlo

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• I started the disk defragment the task, but it has not completed the process. He just continues to run.

  I started the disk defragment the task, but it has not completed the process. He just continues to run. I let it run for days and nothing don't past he never stops running. What should I do to get this to accomplish the task?

  Hello

  Take a look at my responses to a message here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/defrag-has-been-running-for-5-hoursshould-it-take/3f45c33e-08f3-4885-86a7-b5bbfe152dab

  Concerning

  GT4U

• How to extend the range of my Airport Extreme Base Station (802. 11 a, c) using a relay of Airport Express (802.11n).  Airport Utility (V635.2) says that this version does not support the relay.  That is what it is?

  How can I extend the range of my Airport Extreme (802. 11 a, c) using an Airport Express (802.11n) point.  Airport (V635.2) utility does not recognize the Express on its screen?  I have to buy equipment?  I'm on a MacPro OS X 10.10.5.  Thank you.

  AirPort utility that ships with OS X 10.10.5 supports base stations as 802.11ac & 802.11n AirPort. It should be able to configure both of your base stations for a scope (wireless connected base stations) or roaming types (base station connected Ethernet) wireless networks.

  When you initially configure the Wan, it helps to keep the two base stations in the same room. Once configured, you can move the base station that extend to the desired location. The important key is that the final positioning of the station that extends the base must be understood that it's to expand in order to maintain sufficient bandwidth to the station remotely for clients from network connected. Please check the following airport user tip for more details.

• CC will not be listed first installation after that first install would not complete the installation.

  Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

  Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

• Print screen button (with or without the key Fn is) does not start the process?

  Print screen (with or without Fn key) key does not start any process?

  The PrintScreen key is misnamed.  It copies the screen to the Clipboard, so you can paste the image into Paint or other graphics application.

  It has nothing to do with printing [and did not over fifteen years].

  See this thread for some additional useful information - How to use Print Screen on Win7 & where will the image

• Still is not complete the process of generation of new Blu - Ray

  Hello, I'm having some trouble with still and hope someone can help out me. I built a menu for my Blu - Ray which is quite simple and I encounter is not complete the build process while trying to make a menu. I made sure to check for errors before you build a picture and he said there was not. I don't really know what else to say that everything else is pretty standard. I use a background of movement which is about 8 minutes long with a sound that is about 12 seconds of time for my menus. I don't know if audio will be repeat or just play once, but I hope for the former. If not, I'll have to go to audio, a bunch of time in SoundBooth in a loop then import who. Anyway, he shouldn't be doing the build does not work.

  I tried to uninstall QuickTime, reboot my computer and build again (because I heard other codecs can cause conflicts with yet) who solve a mistake that was rising but the construction stops making a menu now. I use the CSI version if that matters. I'll try and reinstall again now but would like to another entrance in case it does not work. Any other advice would be greatly appreciated.

  When a project has had many (which can still) be only 1 errors, simply make a change are not enough. To test possible specific questions, start a new project with a new name and use only what you need to test the issue. And in your case, if you have not already, I would start the project from scratch. You can import the psd menus.

  Anyway, he shouldn't be doing the build does not work.

  I guess he could do the build works do not, especially if the problem is the menu that you declared.

  See for the duration of the menu and timing issues.

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html#ws AC740C6D-83DE-489e-8B15-5A816A3019C7

  Audio short will play and stop. The video will probably set the duration of the menu.

  the construction stops making a menu now.

  What happens if you use the option "Make the motion Menu".

  Edit: File-> Render-> motion Menus.

• Supplementary question: how to fix refresh settings, so that my browser does not destroy the information from the entry form?

  In addition to the question below, another problem is not only my email responses are deleted when the browser refreshes, the message itself is no longer available. I have to start from the point early in my e-mail list, rather than staying on the email once opened.

  Moreover, I reset and restored my Firefox as a solution, which did not help. I did it twice, following the instructions. The process has been painful and I had to get a little information, not to mention a problem with bookmarks merged. I would like to avoid this solution at all costs. Here's what I said earlier. Once again, thanks for any help, you can provide.

  For several weeks now, I noticed that my browser "refreshes" the food more frequently, so often, in fact, that no matter what email, chests or survey questions that I answer get wiped. It started to happen with the last update. I can't find any setting in my preferences that will stop the constant refresh (reload? updates page?). It's also frustrating when trying to make purchases online, and as I said, write emails, fill out forms, fill out surveys, etc.

  Thank you in advance to quickly solve this frustrating problem?
  I use a Mac and spin the Mavericks. This problem was present with the previous operating system, too. Thanks again!

  Greetings,

  The new version of Firefox, 27.0, seems to have solved all the problems I listed above, and I am delighted. Thank you for your time trying to help me solve problems. For security reasons, I was hesitant to go to an earlier version and went to the opera instead. Opera didn't is not supported, however, by my institution if while it helped, I couldn't stand using it.

  Thanks, too, to the team which built 27.0. I appreciate it.

  My problems are now solved.

• I can't answer calls on my watch, it worked fine and now it leaves me the answer but does not bind the call he said uable to link call or something like that.

  I can't answer calls on my watch, when I try it says unable to connect

  Ho

  On your iPhone, look at app check phone settings mirror & sound is on.

  See you soon

  Brian

• Why a menu that takes place does not change the width of my mobile site?

  Hello! I placed a vertical menu inside an accordion for a menu widget that takes place for a mobile Web site. Problem: When I open the menu with Safari on iPhone (iOS 9) the page gets some unwanted extra large. I can't find any objects that might happen on the border. What is the reason for this behavior?

  Web site: Büromöbel Lippische

  Thank you for sharing the file.

  In the content area of the accordion panel you have placed the menu as the 100% with the order of the day.

  Please select the menu and make sure that the 100% button is not active on this issue. Republish the site and it works perfectly then.

  

  Concerning

  Vivek