Still is not complete the process of generation of new Blu - Ray

Similar Questions

• I started the disk defragment the task, but it has not completed the process. He just continues to run.

  I started the disk defragment the task, but it has not completed the process. He just continues to run. I let it run for days and nothing don't past he never stops running. What should I do to get this to accomplish the task?

  Hello

  Take a look at my responses to a message here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/defrag-has-been-running-for-5-hoursshould-it-take/3f45c33e-08f3-4885-86a7-b5bbfe152dab

  Concerning

  GT4U

• Supprised to find that answer BPEL does not complete the process

  BPEL 10.1.3.1.0
  
  We are new to BPEL realitvely so we were surprised by the activity of the response behavior.
  
  We have a few synchronous BPEL process that call each other. We go back an outputVariable/object that indicates the success or failure of the called procedure. After invoking any of these processes, we check the content of the object that is returned in the response.
  
  If the object indicates an error, we the output variable and run a response to our caller.
  
  If the object indicates success, control passes to the next activity in sequence.
  
  But when we looked at the check in the console, we noticed that the execution of the process ended with the answer. Several of the following activities indicate that execution continues and (potentially) returned separate response at the end of the process.
  
  We read this right? There are actually two returned messages?
  
  We would expect this kind of behavior for an asynchronous process, but they are all synchronous processes.
  
  In our tests, the first response sent is received. But we wonder what could happen on a busy network. If the messages back for some reason, the calling process may receive a success message when there really was a problem.

  You are right

  If you model the additional activities after the response that they will be executed.
  you could do the response of your catch error handler

• Cannot install Age of Empires II, it is not complete the installation process

  Original title: I'm not able to install Age of Empires II.  It is not complete the process of setting up and gives me the product identification number. What should I do next?  I had installed and working before you leave on a trip and you returned to find that the files were corrupt. So, I uninstalled and tried to reinstall, but it won't.

  Hello

  1. you receive an error message or error code when the installation crashes?

  2. where exactly you are trying to install the game?

  3. what operating system is installed on the computer?

  Check if an error message or error code is listed in the event viewer. You can check the link below:

  Open the event viewer: http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  Reference: Appears when you install Microsoft Games and mapping programs.
  http://support.Microsoft.com/kb/258496

• Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

  Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

  BillBlackstone,

  KB982018 should be installed last, separately from other

  Install the 3 other updates manually

  Restart

  Back to updates of Windows and install KB982018

  Restart

  05/02 / 1108:16: 57 pm

• hure Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

  Acrobat Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

  Hi RKrensel,

  Please let me know the version of the operating system installed on your computer?

  If you are on windows system, run this tool cleaner Download Adobe Reader and Acrobat tool - Adobe Labs & restart your system.

  Make sure that there are no Adobe process running in the background using the Task Manager.

  Then try to download & install Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X & serialize using your Adobe ID

  Let me remind you that your subscription for one year has already expired on 4 September

  Kind regards

  Nicos

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• When I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation

  I installed several card games again and had no problems.  But when I tried to installHoyelpuzzle and Board of Directors, it was installed but that it would not complete the installation. I have

  Windows Explorer and uninstalled until I reinstalled it.  I've done 4 times.  He went all way through the process, than to see a message that Setup could not be resumed.  Given that the other two disks of Hoyle have been correctly installed, why do I have problems with the drive of Hoyle puzzle and board? I contacted Hoyle and does everything that they told me to do.  But without success.  What could I do it wrong?

  Hello

  (1) what is the operating system that you use on the computer?
  (2) you get error codes?
  If you use Windows 7, Hoyle Board Games is not compatible with Windows 7.
  You try to install the game in compatibility mode.
  Click on the below link to check the compatibility of the game.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Hoyle%20Board%20Games&v=Encore&UID=&pf=0&PI=9&s=Hoyle%20card%20game&OS=64-bit
   
  You can check the link below:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  You can check with the manufacturer of game for patches to run the game on Windows 7.
  http://support.Encore.com/
  I hope this helps!

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Driver management has completed the process to add the HdAudAddService Service

  At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until I upgraded to 8.1 windows and this is the message that appears on the sound properties

  Driver management has completed the process to create the Service HdAudAddService of ID device Instance HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0.

  Driver management concluded the process to install the driver hdaudss.inf_amd64_70c6945afa5f06b5\hdaudss.inf for the Instance ID of device HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1002\4 & 9339 A 11 & 0 & 0001 with the following status: 0x0.

  Method 1 worked 100% here!

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/driver-management-has-concluded-the-process-to-add/04857a5a-5c8e-4790-9D24-5f4c40591a0e

  YES!

  No need to uninstall my drivers!

  I worked in the Services and tinkered with him and he started etc but change for local totally worked!

  YES!

  Thank you!

• Storage migration fails with the error: could not complete the network copy to path to the file

  Hello

  I have two hosts ESXi 5.5 with local storage and VMware vCenter device which manage them. Everything worked well until that time.

  Now when I try to make the host migration and storage, processing or power off the virtual machine, I get the error message:

  Could not complete the network for file /vmfs/volumes/.../path/to/file.vmdk copy

  The situation is the same when I try to deploy VM on ESXi-2 model that is on ESXi-1.

  All with the network configuration is correct. I have ping between the hosts on ESXi and ESXi and vCenter. No firewall hosts ESXi and vcenter. No physical firewall between hosts.

  The network latency is less than 1 ms. No packet loss.

  I read this VMware KB article: Storage migration fails with the error: could not complete network file copy and I tried solutions explained here, but the results are the same.

  You have ideas where the problem may be?

  Hello guys,.

  I finally found the problem.

  ESXi servers are configured with MTU 9000, but the switch where the hosts are connected was a bug documented with frames. I found the problem after finding this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003734

  I run the command of ESXi-1:

  vmkping - d-s 8972 192.168.10.12 where 192.168.10.12 is the ip address of ESXi-2

  The result was:

  3 packets transmitted, 0 packets received, 100% packet loss

  as a workaround, I reduce the MTU to 1500, then I patched the problematic switch.

• "Could not complete the command image size because that file name is not valid"

  Hello

  Please help me, when I try to resize the file psd his watch this message... .whats the matter?

  "Could not complete the command image size because that file name is not valid"

  Thank you!

  I had the same problem with you and tried to look around, but I solved it myself. One or two layers created by the insertion of your library which have been uploaded to the server cloud.

  When you open the file, you can see the warning as "recreate a link... blah blah your file" If reject you the message, you can still work on it, but you cannot resize, or drag all layers to other new file (tried).

  Everything you need that discovering the layers that are related to the server delegating and delete it. FACT.

• Time Machine could not complete the backup

  Since installing a Superdrive replacement, Time Machine is not back up.  I get an error message that says: 'Time Machine could not complete the backup "Time Machine backup disk. Full backup impossible. An error occurred during the creation of the backup folder. »

  I followed the instructions in the Time Machine error - backup failed, but none of the steps solved my problem.

  I suggest that visit you Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Time Machine could not complete the backup-backup drive is not found

  I get a message...

  "Time machine could not complete the backup to Time Capsule

  I can't find the backup disk. Make sure that the backup disk is connected, or select a different backup disk. »

  I have not had this problem before, it's all connected...

  If you have not already made a comprehensive network feeding cycle, it would be a good basic troubleshooting step.

  To turn off some appliances, you actually pull the plug on the appliance.

  Turn off all devices on your network, computers, routers, modem, printers, mobile devices, etc... in any order you want

  Wait a minute

  Turn on the modem and let it run for 2-3 minutes by itself

  Switch on the device connected to a modem and let run for a minute

  Keep turn on devices one at a time about a minute apart, until the entire network is back

  Try a backup

  Report on the results

• Time machine could not complete the backup of... The backup disk image could not be found (error (null))

  Running OS 10.11.3 on my early 2011 Macbook Pro 2.7 GHz Intel Core i7 with 4 GB 1333 MHz DDR3, use Time Machine to back up to my Airport 802.11ac purchased 16/09/2014:

  Backup failed: Time Machine could not complete the backup of... Airport Time Capsule.   The backup disk image ' / Volume/Data/MacBookPro.sparsebundle ' could not be found (error (null)).   Last successful backup: yesterday at 12:17

  I can see the airport and the data file in my network.

  I immediately did a full time Machine backup on a USB key and it disconnected from my system.

  I unplugged the airport, let it rest for a minute and returned the power plug, let it settle for a green light.  I'm restarting Time Machine backup to the airport.

  I need to replace the airport?  The appliance starts to fail?  Or, it is more likely is a problem with winter static electricity that has damaged the image and reconstruction will fix all this.  Reconstruction will take about four hours with no guarantee that it will work.

  Please see #C17 in this document great support... http://pondini.org/TM/troubleshooting.html