Surface Pro 3 touchscreen does not respond correctly

Similar Questions

• Microsoft Surface Pro - striking swiping does not work

  Hello

  I have desktop, versions Tablet and phone from my site, designed with Muse and everything works fine... except on a Pro of Microsoft Surface (Tablet version) drag between the images in the slideshow doesn't work.  I tested this on an iPad, the Tablet Dell, Tablet Samsung Tab and slide it works well in the version of the tablet of the site.  The version of the Tablet displays well on the Surface Pro, but none of the many slideshows work with swipe.  (Slippery surface works with other sites).  All updates have been applied to the Surface, and I re-calibrated the touch screen.

  Here is the site:

  www.johnblaustein.com HOME page (note that the slideshows are auto-play, but slideshows with images numbers below the frame image are not auto-play and work with hitting swipe)

  Any other person having hit swiping problems with the Surface Pro?  A way to solve this problem in Muse?

  Thank you.

  John

  Thank you for more details and results of the tests. Yes, we have connected bug against this behavior and to study further for the solution.

  I will update you on the same thread once the problem is corrected.

  Thank you

  Sanjit

• OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

  I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

  Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

  I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

  The printer is connected wireless to my router, using a 'fixed' IP address

  Can someone help me, please?

  Thankx

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• Unable to play the game of solitaire, it is corrupted and does not respond correctly

  Original title:

  WINDOWS VISTA ULTIMATE MEDIA CENTER (solitare game) is corrupted - how fix this? SUPPORTED

  The SOLITAIRE game that is part of WINDOWS - VISTA ULTIMATE (MEDIA CENTER) is damaged and does not correctly: IE: he jumps after several games of cards (3) when you click on the bridge, rather than 3 at a time.  How can I solve this problem? ... SUPPORTED

  Hello

  Method 1:

  Disable and re-enable the solitare game of "Turn Windows features on or off". See the following link for the same od:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Method 2:

  Put the computer to boot and then check if the problem persists.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135 
  
  Note: Don't forget to put the computer to a normal startup. Follow step 7 of the above mentioned link.
   
  Method 3:

  I suggest to create a new user account and see if the problem still occurs, follow the link:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix follow him damaged user account the link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

• Surface Pro Fallout 3 does not

  Can someone get Fallout 3 to work on the Surface Pro. I can install it via Steam, get to the screen to launch, but when I press Play; the game fails to load or to go further - any suggestions?

  OK, for those who have the same problem. Here is the solution.

  You will need (from the Fallout 3 Nexus and a French site that I found)
  (1) disable Games for Windows Live (you will not be able to use it at first, but be prepared)
  Link: http://www.jeuxvideopc.com/downloads/7413-fallout-3/details-29926.php
  (2) I started a game on my main game rig to generate the following files to at least get the initialized game Fallout ini, falloutprefs and Renderinfo
  I copy & pasted into My Documents / my games / Fallout 3. on my Pro Surface
  Now (since I got the inifile in place) I could launch the program disable Games for Windows Live
  You will still not managed to start a game at this point, but is one of the biggest obstacles to the road.
  Now go to Fallout 3 Nexus and download the compressed file Package Intel HD Graphics Byypass
  http://Fallout3.nexusmods.com/mods/17209/?
  Unzip it and follow the instructions.
  Click the shortcut of Fallout 3 and there you go. :) - Finally

• Sat Pro L10: WXP does not start correctly

  With a few computer startup problems. Screen loads but does not load the widows "xp" logo. So, I went with a balnk screen and no computer activity. Can you help me?
  S

  Hello!

  It can be:
  1. some Windows XP system files are damaged (it looks like explorer.exe)
  2. the machine has probably a virus.

  Suggestion: it is possible to reinstall OS (Windows XP)

• Satellite Pro L850-1DW does not start correctly

  Hello

  I have a client who has a L850-1DW / PSKDHE-00E005EN laptop.

  She keeps pointing out that the computer does not start successfully from the cold.
  She argues that the question arises mainly when the battery starts but sometimes when it is plugged into the mains.
  I can see where point of newspapers that BSOD were registered at the start and that, on more than one occasion, his computer was recovered from a restore of Windows. He has also recovered factory once too.

  Although I've seen the consequences of these issues of "start-up" I have yet to experience first hand with the device.

  I noticed yesterday that the BIOS is outdated (as I had an alert Tempro).
  I upgraded from 1.6 to 6.50. Yet once, I didn't have problems.
  I can't find the release notes for the BIOS so I don't know if this is a known problem that has been fixed.
  I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.

  Any suggestion is welcome.

  Otherwise, I guess I have to connect a call with Toshiba.

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should ask your client if you can make the data backup and install original recovery image. To my laptop computer reviews must be tested with the settings without installation of additional software.

  > I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.
  Who knows? Ask your client and show how to start the laptop by pressing the button walk / stop. It must be done slowly and for only one second.

• Gesture with one finger touchmouse does not respond correctly

  My fingers touchmouse gestures work ok, except for the gesture with one finger :( It does not at all on the desktop. It scrolls only of up and down a Web page, or when I'm in a window. It does not navigate to other directions with one finger.
  A quick response would be appreciated.

  Hi Teri,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Keep us updated with the results once you try the steps above.

• my mouse on my laptop does not respond correctly, going where ever he wantsa go and don't type wht words I will have a few seconds delay, can't play games or do much his frustratjing

  the mouse does not well, typing is slow and have to wait for the words to catch up, internet or disable, this has just begun, I can't select things very well, it takes time to play a game or write a letter

  Hi Kandikane,

  A. are you referring to the touch pad or external mouse?
  B. What is a USB or a wireless mouse?
  C. who is the manufacturer of your computer?
  D. recent changes made on your computer?

  You can try to update the drivers and let us know the result

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the driver, and then choose Update.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• After update Xbox Elite anniversary update cortana does not respond correctly

  I recently updated my Xbox Elite One August/anniversary update and everything works great except for Cortana for some reason any that it says that my profile customization is limited. It works for the rest of my family. Does anyone have the same problem or difficulty. Thank you.

  Original title: Xbox 1

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• vCenter does not respond correctly

  Hello

  I've updated vCenter 5.0 to 5.1 U1a vCenter everything is good, expect for the fact that when I for example. try mirage a virtual machine or adjust some settings on the cluster, I get an error: the request failed because the server remote tool too long to respond. I tried to reduce the CV database and working for 2 min. and then backup of "request failed because the server remote too long answering tool..." dose - anyone know what it is?

  Thanks in advance

  

  The problem was the DB. I installed a fresh vCenter server and DB, and it worked.

• Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

  Since a few days I can hardly use Lightroom more. A few minutes after you start Lightroom, it becomes extremely slow. The cursor will also each where I don't want that. If I'm looking for a photo it stops on any other photography. When I close Lightroom I and start it again I can use it for 3 or 4 minutes without problems, but it starts again. If I open it in Adobe Photoshop Lightroom Photographers I have no problem. It is fair to Lightroom. I hope someone can help me.

  What tasks you perform in these "minutes"?

  Specifically, you do a lot of brushing or healing spot?

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed