OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

Similar Questions

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• Tecra A7 - Intel PROSet / Wireless does not respond to the stop

  Hello

  during shutdown of my Tecra A7 the Intel PROSet/Wireless does not react, but must be completed manually.
  The last such Intel driver published by Toshiba download would help solve this problem?

  Thanks in advance for your support!

  Best regards
  ClausP

  Hello Christmas

  You can try to remove Inter PROSet and use the Windows settings for WLAN configuration.

  I don't have this problem, but you can also try installing the latest version of the Toshiba support page.

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Satellite Pro M10 PS630E does not start after upgrading CPU

  I tried to install a new processor for my Toshiba Satellite Pro M10-PS630E.
  He initially has a 1500, I tried to put a 1766.

  I follow the maintenance manual, later the computer change is not star upward.
  When I connet to power it show that the luminous power of orange/amber color and make 5 flashes, then 3 and then restart blinking.

  My question is "is it posible to do a reset of the bios parametrers" or "reset the CMOS?
  Is it possible to get it working again.

  Hello

  The flashing light means that it has detected a hardware problem on the motherboard!
  Perhaps you have used a wrong CPU and is not compatible.

  Perhaps the BIOS does not support this processor and therefore this flashing error code appears.

  What say you can't update the BIOS! First of all, that's not possible since only focused on the victory of BIOS is available for download. You must run the Windows operating system to update the BIOS.
  Secondly the update of the BIOS won't help you with this problem!

  You must use a CPU that is fully compatible!

  Welcome them

• HP Pavilion 15-e017tx - button Wireless does not work after bios update

  Hello

  I have the HP Pavilion 15-e017tx for the past 8 months.

  Press f12 to this machine is shared by the key wireless button, which was working fine until there was a BIOS update last week.

  Now I try to turn off the wireless using this button it will not respond (light orange).

  I checked the Device Manager, there seems to be a problem with the driver.

  IF you have knowledge of this problem please let me know.

  Thank you

  Hello:

  The update of the BIOS should affect the driver wireless button.

  I would recommend that you reinstall as the unknown device is probably the one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 5389906 & sw_lang =

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Pavilion 15 n096sa: Hp Pavilion Wireless does not work after Windows 10 critical update

  HP laptop Pavilion 15 PC - product number: F4T58EA #ABU - 10 family 64-bit Windows

  Hi all

  I have recently upgraded to windows 10 and had not had any problems until one evening internet dropped out. After a while I realized the wifi adapter did not work. I tried to update the driver, nothing helps. The unit displays under working properly in Device Manager but does not appear in the network connection settings.

  I tried a system restore point that solved the problem but then Windows 10 updates (updated critical around 23 September 15) and wifi no longer works again. I noticed there was recently a couple of new updates of the driver (sp72517), but these have not solved the problem.

  I can still connect to the Internet using a LAN cable, but need help need help I can't easily use a LAN due to the location of routers. I've updated the Hp Wizard and I tried troubleshooting etc but still no joy.

  The elbow of any help would be appreciated gratefully.

  Thanks TT

  Hi all

  I managed to find a solution to this problem online, don't know how or why it worked, but it solved my problem and I hope that it might help others.

  I uninstalled and deleted the files from the wireless driver, then uninstalled Kaperskey and restarted my laptop. Then I went into Device Manager and manually updated the network drivers (think I might have restarted again here) and sucsess hey presto, all that remained to do was to reinstall kaperskey.

  Hope this helps someone else with a problem with wifi Realtek Pavilion.

• N5110 wireless DOES NOT WORK AFTER RE INSTALL WINDOWS 7, I NEED THE DRIVER without THREAD SPECIFIC please

  Hello

  My problem started when I re installed windows 7 Ultimate and everything worked perfectly including wireless internet connection

  Only free Wifi does not, I tried to download almost all of the drivers in the support page for the model my and still not identified, I even called customer service and they sent me the link to the pilot specific and still does not.

  Please help, any solution...

  THX in advance :)

  Good guys and finally I did it.

  I will talk about my missing driver, either (on the inside of the Device Manager) (NETWORK CONTROLLER), I just pressed on right click then properties, then you choose details... instead of the description of the device open and choose the lds material then simply copy the 2nd driver name and google it online, you will find free download from many sites thro web... I just did this and simply the wifi works perfectly now.

  :)

• Surface Pro 3 touchscreen does not respond correctly

  Original title: touchscreen turns out be a pain

  Hello and sorry for such a pessimistic title for my post, but it's the truth.

  I feel like I have to clean all my touch screens at least a dozen times every day and who still does not seem to keep them working properly. I use Windows Pro 8.1 on my 3 Surface Pro and my office and touch screens on both systems, of course. My question is simple enough, it seems that I have to click on 'touch' on any of a zillion times for the computer to realize that I'm actually doing something. Is this normal after the first week or I have to update the drivers or something?

  Also, is it just me or do DirectX present a major problem with touch screens? I play LOTRO and I double-click-right on everything in order for people to talk to me or to make a transaction in store interfaces. This is not normal, and if that's the case, why can't not Microsoft fix this? I can't be the only person who has noticed or written on touch and directx...

  Anyway, if anyone knows of solutions other than return to the mouse, please let me know. :)

  Hi Heiko,

  Thanks for the update. This could be caused by a compatibility problem between Internet Explorer and the site that you are. Sometimes, this can be fixed by adding the site to your list of compatibility view.

  Difficulty of the problems to view site with compatibility view

  http://Windows.Microsoft.com/is-is/Internet-Explorer/use-compatibility-view#IE=ie-11

  If the problem persists, then as you say the problem seems to be specific to the application it would be best to contact their support site.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.