vCenter does not respond correctly

Similar Questions

• Unable to play the game of solitaire, it is corrupted and does not respond correctly

  Original title:

  WINDOWS VISTA ULTIMATE MEDIA CENTER (solitare game) is corrupted - how fix this? SUPPORTED

  The SOLITAIRE game that is part of WINDOWS - VISTA ULTIMATE (MEDIA CENTER) is damaged and does not correctly: IE: he jumps after several games of cards (3) when you click on the bridge, rather than 3 at a time.  How can I solve this problem? ... SUPPORTED

  Hello

  Method 1:

  Disable and re-enable the solitare game of "Turn Windows features on or off". See the following link for the same od:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Method 2:

  Put the computer to boot and then check if the problem persists.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135 
  
  Note: Don't forget to put the computer to a normal startup. Follow step 7 of the above mentioned link.
   
  Method 3:

  I suggest to create a new user account and see if the problem still occurs, follow the link:

  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix follow him damaged user account the link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  I hope this helps.

• Gesture with one finger touchmouse does not respond correctly

  My fingers touchmouse gestures work ok, except for the gesture with one finger :( It does not at all on the desktop. It scrolls only of up and down a Web page, or when I'm in a window. It does not navigate to other directions with one finger.
  A quick response would be appreciated.

  Hi Teri,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Keep us updated with the results once you try the steps above.

• my mouse on my laptop does not respond correctly, going where ever he wantsa go and don't type wht words I will have a few seconds delay, can't play games or do much his frustratjing

  the mouse does not well, typing is slow and have to wait for the words to catch up, internet or disable, this has just begun, I can't select things very well, it takes time to play a game or write a letter

  Hi Kandikane,

  A. are you referring to the touch pad or external mouse?
  B. What is a USB or a wireless mouse?
  C. who is the manufacturer of your computer?
  D. recent changes made on your computer?

  You can try to update the drivers and let us know the result

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the driver, and then choose Update.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Surface Pro 3 touchscreen does not respond correctly

  Original title: touchscreen turns out be a pain

  Hello and sorry for such a pessimistic title for my post, but it's the truth.

  I feel like I have to clean all my touch screens at least a dozen times every day and who still does not seem to keep them working properly. I use Windows Pro 8.1 on my 3 Surface Pro and my office and touch screens on both systems, of course. My question is simple enough, it seems that I have to click on 'touch' on any of a zillion times for the computer to realize that I'm actually doing something. Is this normal after the first week or I have to update the drivers or something?

  Also, is it just me or do DirectX present a major problem with touch screens? I play LOTRO and I double-click-right on everything in order for people to talk to me or to make a transaction in store interfaces. This is not normal, and if that's the case, why can't not Microsoft fix this? I can't be the only person who has noticed or written on touch and directx...

  Anyway, if anyone knows of solutions other than return to the mouse, please let me know. :)

  Hi Heiko,

  Thanks for the update. This could be caused by a compatibility problem between Internet Explorer and the site that you are. Sometimes, this can be fixed by adding the site to your list of compatibility view.

  Difficulty of the problems to view site with compatibility view

  http://Windows.Microsoft.com/is-is/Internet-Explorer/use-compatibility-view#IE=ie-11

  If the problem persists, then as you say the problem seems to be specific to the application it would be best to contact their support site.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• After update Xbox Elite anniversary update cortana does not respond correctly

  I recently updated my Xbox Elite One August/anniversary update and everything works great except for Cortana for some reason any that it says that my profile customization is limited. It works for the rest of my family. Does anyone have the same problem or difficulty. Thank you.

  Original title: Xbox 1

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• Lightroom after a few minutes of extremely slow. Also the cursor does not respond correctly

  Since a few days I can hardly use Lightroom more. A few minutes after you start Lightroom, it becomes extremely slow. The cursor will also each where I don't want that. If I'm looking for a photo it stops on any other photography. When I close Lightroom I and start it again I can use it for 3 or 4 minutes without problems, but it starts again. If I open it in Adobe Photoshop Lightroom Photographers I have no problem. It is fair to Lightroom. I hope someone can help me.

  What tasks you perform in these "minutes"?

  Specifically, you do a lot of brushing or healing spot?

• Windows Explorer does not respond, the applications do not open, System Restore does not work. Help!

  Hello, my computer is having a lot of problems, which started last night. Here are the things that are run:

  -Windows Explorer does not respond
  -Computer cannot disconnect correctly: down/restarts when I close the computer says "disconnect" for hours.
  -Cannot use the system restore and may not even start from Safe Mode command prompt
  -Safe mode does not load
  -No applications work, apart from web browsers, and AVG.
  -Cannot access the drivers, to make anything back.

  I added not all strange programs and I do not think it is malware, but I can't actually run my anti-malware program. My computer is running really hot, what he has always done and I keep it high and the fan not covered (I'm broke, can't afford a fix of the computer, or the new computer).  Please talk is profane. I'm not all that techno.  THANKS FOR ANY HELP!

  The model is:

  M8622 laptop Gateway
  Vista Home Premium 32 Bit

  So I reinstalled everything, and even though it's a pain, my computer is normal again! Must have been a virus.

  Thank you very much for your help!

• HP Deskjet 2540: Does not print correctly

  Hello!

  I was wondering if everything can perhaps help me?

  I'm in Uni and so have to print several etc test and for all these front page - but every time I try to print this cover on the printer page or amends the provision does not print. Why is this?
  The cover page looks essentially like a chart with several boxes.

  And even if there is enough paper in the printer it says exactly the opposite, I want this problem is easy to fix (remove the film and put it again), but it's starting to annoy me

  Is there something I can do?

  Thank you in advance!

  Hello @alinah,

  Welcome to the Forums of HP Support!

  I understand that you are printing problems when printing a cover sheet with your tests to your computer Windows 8.1 for the all-in-one printer HP Deskjet 2540. In addition, you have met your printer issues as well with intermittent 'in paper'. I want to help you solve these issues today.

  To be honest, the paper intermittent power issue and the cover page number can down to a problem of programming with your printer. If your "brains" of printers is corrupt in any way that the printer is not responding correctly. To make your printers programming up to date, please click here. When the site opens, select the download button at the top left. Allow the download to run. Please follow the instructions on the screen to complete the Firmware update of the programming.

  Once the update is complete test please print again. If the number of cover persists, please continue to the next step.

  Add another driver:

  It is likely that the driver for Deskjet you use is in conflict with your Windows 8.1 operating system, even if your printer is compatible with the Windows 8.1. To ensure that a driver conflict provokes questions, please follow the steps below.

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your HP Deskjet 2540 and left-click on properties of the printer
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  11. Under the printer properties window, select "Apply", but don't hit not OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 2540
  14. Click OK
  15. Finally, right click on your HP Deskjet 2540 one more time and left-click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK

  Once the new driver is added, please test print to see if your problem is resolved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• "files and printers, sharing resource is online but does not respond to connection attempts."

  I just got a HP Pavilion dm4-2180us running W 7 Home Premium which does not connect to other computers on my network, or residential group. I get the message "files and printers, sharing resource is online but does not respond to attempts at connection." and the path not found error code. All other 3 computers recognize and connect to the network with no probems, including an another Dell Inspiron also running the same version of 7 W bought the same month as this HP! I tried to launch the troubleshooting tool and even restore the computer to its orignal State; It woud work for a few days, then would not connect or recognize the other computers on the network.

  Help, please!

  A N T

  Hello Dynotnt,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above does not help, then you can run the network troubleshooter and see if it can detect and correct the problem.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I hope this helps.

• Application does not start and does not respond. Closed that it self.

  Hi guys

  I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.

  To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.

  Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."

  I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...

  Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)

  Thank you very much!

  OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.

• localhost is online but does not respond to connection attempts

  It comes to my Windows Home Server 2011 and I can't have my Web home page, or any page on my server, to display.  I get the message error #404 and what I tried to give me the same results.  I tried directly from the desktop to servers, other computers on my local network and via the internet from my work.  The only indication I've seen a problem is that when I click on the "connection problem Fix", I get the message 'site Web (www.rkwco.com) is online but does not respond to attempts to login.' message.

  This isn't someone else's system, it's mine.  It was working before and I'm not sure what I did to get it to stop.  If I can understand what is causing the problem, I know that I can understand what to do to fix.  So far all my research for troubleshooting help keep pointing the browser to the corrections, but I am sure that I have eliminated that as a possibility with the locations of various clients and access methods.  One last piece of info, is that if I try to TELNET using port 80, I just get the message that it cannot open port 80.  Which was making me look in the direction of the firewall settings but I don't know what to look for in there.  Suggestions on what/how to test your access to this web server?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• Yahoo mail does not load correctly

  Yahoo mail does not appear correctly. Does not add, or graphics. I uninstalled Firefox and reinstalled the latest version and it did not help. I started Firefox Add - ons disabled and this did not help. Yahoo email is the only site to be on. Gmail opens fine with Firefox and yahoo mail opens fine in Internet Explorer. It started tonight and nothing on my computer has been changed before you start.

  Nothing of what you have suggested will be / will work. I tried all your suggestions and much more, before you find what is the problem. Yahoo mail not properly opens with Firefox, if you try to open it with Yahoo messenger open. If anyone runs into this problem, close on yahoo Messenger and open your mail with Firefox alone.