Switch off automatic updates blackBerry Smartphones?

Similar Questions

• "operations are underway. Please wait. The machine switches off automatically '-system never stops.

  Sometimes, when to stop Vista, instead of a normal shutdown, I get quite common background and a message reading: "operations are underway. Please wait. The machine switches off automatically. "The system then continues to run indefinitely, and I finally have to do an emergency stop. After the reboot, I then most of the time have to do a restore to an earlier point; Once in a great while, he'll tell me the test stops abnormally and charge really. Tried to figure what could be causing it and can't find a logical reason. Diagnosis never found anything, but there is not really anything in the windows which diagnosed something as a shutdown of the system.  Help.  It's boring.

  Hi Baron Stewart,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then try to stop

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  
  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• How can I turn off automatic updates of windows on my old xp?

  Original title: chris

  How can I turn off automatic updates of windows?

  Hello

  You have XP that your Thread appears in Windows_XP - Windows_Update Forum at the web address?

  You should only get the malicious software removal tool every month now as Support for XP ended in April.

  If you do not want to get this:

  Click Start > right click on my computer > click Properties > click on the "Automatic updates" tab at the top of the system than appeard Properties window > click the option box for "disable automatic updates > apply and OK your way out.»

  See you soon.

  Edit: just saw that you do not have XP. I typed the reply to your message to moose that you posted your second post

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• UPDATE blackBerry smartphones

  Hello

  I have 1 notification update of my black berry 9790 so I confirm to update and when the update starts my stop from phone to 18% for a long time, then listening off and it starts the installation now, he was arrested at 11% and I am not able to do anything with my phone. Can you please help to solve this issue.

  Can't wait to hear from you soon

  Thank you and best regards

  ELIJAH

  Hi eliet

  Welcome to the Forums of the BlackBerry Support

  There are two methods for recovering for you to try:

  (Credit JSanders)

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Update blackBerry Smartphones 'Personal data' problem then 7.1.0 Bundle 1149

  Hello

  Whenever I go to download the update of the software ' 7.1.0 Bundle 1149' it comes up with an error at the end by saying that I need to remove "21.4 MB of personal data", so I wonder about what exactly is 'personal data', so I can take advantage of the new update of the system...

  I'd appreciate it if someone could return as soon as POSSIBLE, thank you.

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Turn off wireless sync blackBerry Smartphones

  BlackBerry Bold 9700, Version 6, Bundle, 1879 (v6.0.0.448, platform 6.6.0.124).

  BlackBerry Desktop Software: 6.1.0.35 Bundle 34 out June 7, 2011.

  Windows 7 (64-bit), Office 2010 (64-bit)

  On the Blackberry Desktop Software, I select the organizing element on the left menu and see the following:

  (selected) <-->Microsoft Outlook calendar

  (selected MemoPad <-->Microsoft Outlook

  (not selected) Address book (wireless sync)

  (selected) <-->Microsoft Outlook tasks

  In practice, my (Outlook and Blackberry) address books are not synchronized at all.

  The help function directs a as follows:

  Turn off wireless sync

  To synchronize your organizer data, you must turn off sync wireless for each data type of Organizer you want to sync using the BlackBerry® Desktop Software.

  1. On your BlackBerry® smartphone, in calendar, Contacts application, tasks of application or Notepad application, press the Menu key > Options.
  2. If necessary, click a calendar or contact list.
  3. Change the wireless synchronization in No. field or uncheck the wireless sync.
  4. Press Menu > Save.

  In step 1, I can choose one of the apps, but don't get anything like wireless sync options.

  At the top of the Blackberry home screen where the status of telephone network, there is an option to enable or disable the Wi - Fi connection, but after having turned off here, it still does not allow me to sync my address book via the connection cable PC/phone.

  Where and how can I turn off wireless sync so I can sync via cable?

  Try this and do the reverse operation:
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB0...

• Frozen to the software update blackBerry smartphones

  I have a Blackberry Curve 9360 and it is frozen all by doing an update of the software (progress overall backup 13%).  It has been like that for the last two hours.  I tried to take out the battery, but it just goes back to the same screen when it restarts.

  Can anyone help please?

  Two options to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Update blackBerry Smartphones/application through desktop bb software software

  is it ok to update software of bb? How long does take to update the applications or the software?

  Yes, about an hour.

  Use the BlackBerry Desktop Software on your computer, make a backup of your BlackBerry smartphone, first.

• Update blackBerry Smartphones the my OS

  This morning I tried to update blackberry OS settings. I went into settings > device > software updates and choose the option to update the latest OS OS for my BB Curve 9360. However, it is now stuck on 11% BACKING UP a said was like this throughout the morning from 08:00. and the notice said that the fone will be inactive for only 2 hours. someone please help urgently as I am waiting for urgent appeals that I can't afford to Miss

  Hi Lemii_Loco

  Welcome to the BlackBerry Support Community Forums

  Personally, NEVER above the Air software update .the are a few suggestions for restore you your device from this situation:

  Credit JSanders

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

  Prince

  ____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Updated blackBerry Smartphones more recent BBM surveys

  I received a notification of the world BB app there is a BBM updated and installed the latest version. But I was not able to install the last world of BB. Now, I'm not able to use BBM as he continues to ask me to key in my BB pin and when I do, the message is "the server is not available. Don't know how to solve this problem and cannot use BBM now. It is very annoying. Help, please!

  Hi MaeKan

  On BlackBerry 7 devices, BlackBerry ID is deeply integrated into our device, this is the main key for many applications on your devices. On your device Homescreen go to Options > device > BlackBerry ID > press the Menu key > click on Check for Updates if updates are available, if it will download on your device.

  • KB23716 : What is a BlackBerry ID

  Like you have several problem with your device, please try these steps in a sequence:

  1 - Save your pocket computer.

  • KB00510 : How to register a BlackBerry smartphone with wireless network
  • You expect a registration messages in your Inbox messages.

  2 remove and return your Service book

  • KB05000 : Remove the maintenance book for the e-mail account to BlackBerry Internet Service from the BlackBerry smartphone
  • KB02830 : Send service for the BlackBerry Internet Service directories
  • (Wait an Enrollment Message arrives in your Inbox for each email that you have configured on your device)

  3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

  Once you did try BBM to see if it allows access. Or perhaps reinstall the BlackBerry Messenger application using the same method as mention earlier.

• Update blackBerry Smartphones / Device Manager issue

  Hey guys, I have a problem.

  I recently acquired a Blackberry 8330 and let me start by saying this: it's one of the best machines I've ever held. It is simply amazing.

  I installed the Device Manager and have been using it without any problem. Then, I went and did an update wireless with my phone, the upgrade of the OS. Since I did this, however, the Manager has recently stopped recognizing my device - my computer recognizes him again, as he charges when it is plugged in and I can always access to the hard drive, but for some reason, I cannot use the Device Manager to do anything - down, States in the Device Manager there is no trendy Black Berry as shown by the 'None' exposed next to the Pin number.

  What can I do? I really need to access blackberry via the Device Manager. Someone, please help > _

  Things I've tried:

  -Restart the Blackberry (both by pressing the red button and pull the battery and re insert)

  -Update the device to the more recent version Manager

  -The latest version is uninstalled, then download and install the version provided with the blackberry (4.2)

  I noticed that the CD that came with the device itself does not contain the most recent edition of the Device Manager, if that means anything. It's just weird that the Device Manager has stopped working after I upgraded. Currently, my OS is V4.5.0.175. I've recently updated both my 8310 Black Berry - same question parents. Before, I could access it via Device Manager. Now, I can't. Please help me!

  -Santos

  Ahhhh Yes... interesting... try these:

  Here is the list of troubleshooting atricles... I hope that something will be useful:

  http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  KB02640 Troubleshooting USB connections
  KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  KB01451 How to enable Sync advanced logging if a wired synchronization fails

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these.

  I hope that something it is useful!

  See you soon!

• Data not updated blackBerry Smartphones when inactive phone

  Hi all

  Recently, I removed my main of my device e-mail address while he is on vacation.

  I just put back it, but now I find that data (emails and BBM) are not updated when the phone was in bag for awhile.

  If I put myself in response to or sending emails or BBM of unit all starts update again and all emails in circulation and BMMs come out at the same time.

  Everything working the normal flow is restored, but after being in the Pocket for awhile everything stops again.

  Any ideas?

  I noticed the problem when I started getting these archaic messages called SMS asking me why I do not answer to my BBM... naturally the idea of not receiving them is scaring me senseless!

  Kind regards

  Erik

  Hi and welcome to the forums!

  We need to know what version of the software on your device.

  Check the version of operating system of the device, and then use the correct steps to register your device. Basically, you refresh your network connection and the software to control the connection on your device.

  Thank you

  Bifocals

  KB23393 How to check the version of the BlackBerry Device Software installed on the BlackBerry smartphone

  KB00510 How to register a BlackBerry smartphone with wireless network

  KB02141 How to reset a BlackBerry smartphone

• TURN OFF automatic updating for printer in Windows 7

  Best regards

  I'm a tech support person, I have a client with a Cap HP 1315, in Italy.

  I want to DISABLE the automatic updates functionality check, can someone help me to do this?

  Operating system is Windows 7.

  My client doesn't want automatic updates, prefer to check the updates manually. I agree that

  This function should be optional. It should be easy to check in the properties or somewhere in

  Put this on or turned off, but after a long look at the awkward interface for the printer and elsewhere in the operating system

  I can't find a way to see this feature and turn it off.

  Thanks in advance for any help here... best regards.

  William Posey

  Pantelleria Italy

  Hi William,.

  In the Menu start, open the all programs, open HP and launch the application updated HP - you should see a settings button in the lower part, click on this button and change the frequency of checking of updates (select never you want to manually check), then click on apply to save the setting.

  Kind regards

  DP - K

• Cannot turn off automatic updates and the Error Message on Loadup and Peridoically subsequently

  The following error message appears when the computer starts up, when I click on "check for updates", when I try to turn off the automatic updates in the preferences and at random times.  In the preferences, more precisely, I am able to choose the area that must go out looking for updates, but when I try to save the setup I get this exact error message.

  -----------------------------

  AdobeARM.exe

  The procedure entry point CreateProcessWithTokenW is not found in the library of Hotlinks ADVAPI32. DLL.

  -----------------------------

  The computer is an old laptop running Windows XP.  I think that it's Windows XP is a key reason why the error occurs.  That said I can't replace the laptop right now so I would turn off rather updated.  I've updated to the latest version of Adobe Reader from the Adobe Web site.  The new version added a 4th checkbox in the section to turn off the automatic updates, but I always get the same exact error message.

  Is there a hidden Windows Settings folder I have can be directed to Adobe Reader?  A file where I can change the automatic updates option from 1 to 0 to turn it off?  Because the software does not work.

  Please, create the following registry key:

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\11.0\FeatureLockDown]

  "bUpdater" = DWORD: 00000000

  In addition, you can run msconfig (via the Win + R), go to the Startup tab and deselct point of 'Adobe Reader and Acrobat Manager' (which corresponds to the process AdobeARM.exe), press on apply and restart your machine.