SX20 via profile sure MRA

Similar Questions

• How to send e-mails via profile

  pls explain,
  When I join a site atg, send automatically details of user to specific email id (the email user id) profile.
  explain which measures class i and are implementing... or send the source code...
  
  (Note: do not use scenario)
  
  Published by: 940336 on June 13, 2012 12:11 AM
  
  Published by: 940336 on June 13, 2012 12:17

  This could be done easily define a scenario using the event 'register '. But given that you do not want to use the scenarios you can try to extend ProfileFormHandler and override the postCreateUser() method in the class you.

  You can override the configuration of/atg/userprofiling/ProfileFormHandler within the layer of your application configuration and change his status on your extended. You must call super.postCreateUser () in your overridden method in your extended class so that ProfileFormHandler.postCreateUser () can complete its activities, which are held on the creation of a new user profile. After which, you can use getProfileTools () .sendEmailToUser () to send an email.

  You will also need to ensure that you have correctly configured components TemplateEmailSender and TemplateEmailInfo for sending the e-mail successfully. Please refer to the Guide of programming of customization for more information related to the configuration of these.

• Photoshop commands are affected by the gray color profile?

  In Adobe Photoshop color settings, you can choose different workspaces for gray:

  • Dot Gain 15% (the default value for Europe)
  • Dot Gain 20% (the default value for North America)
  • Gray Gamma 2.2 (the default value for the web)

  Obviously, the conversion to and from grayscale (Image > Mode > grayscale) is affected by this setting.

  Including other features or blending modes are affected by this setting when you are working on an image in RGB or LAB color mode? I'm not going to convert the image mode to grayscale at any point.

  In principle, the profiles in grayscale are like all other profiles and behave in the same way.

  In a conversion profile, you'll leave source via profile connection space (usually Lab) to destination space. If the destination is grayscale, only the L layer is passed. In all cases, you have the usual remapping from source to the destination.

  Fattening and gray gamma are your just different response curves, like Adobe RGB is gamma 2.2 and ProPhoto gamma 1.8. Fattening is intended to compensate for ink spread when it hits the paper. You can consider fattening as equivalent in CMYK and gamma as equivalent to RGB (this is just a rough analogy of course).

  One thing that is affected by your work, gray, is how you see the individual channels in the Panel layers. Here your grey work is assigned, what determines how values are represented. Similarly, all readings of grayscale in the info panel and elsewhere, are relevant to the gray work.

• Endpoint of telepresence registering on CUCM by motorway from the Internet

  Hi guys,.

  I have a question - how to correctly register telepresence endpoint (I SX10, 20, 80) on pit CUCM Expressway on the Internet?
  I found a following document - http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf, guide on p.48 there, but it did not work. and I don't have any after such configuration event log.

  If the change other options in SX20 as "Profile SIP" and "Proxy", I get the following errors:

  2015 04-10 T 17: 30:04 + 03:00	"" "" "TVCS: event ="rejected registration"reason ="unknown"Service ="SIP"Src - ip ="213.108.78.215"Src-port ="48150"Protocol ="TCP"AOR ="sip:mydomain.com"Contact ="; + sip.instance\ ="" "duration ="3600"Level ="1"elements UTCTime ='2015-04-10 14:30:04, 698"
  2015 04-10 T 17: 30:04 + 03:00	"" "" "TVCS: event ="applied for registration"Service ="SIP"Src - ip ="213.108.78.215"Src-port ="48150"Protocol ="TCP"AOR ="sip:mydomain.com"Contact = '; + sip.instance\ =""" "duration ="3600"Level ="1"elements UTCTime = '2015-04-10 14:30:04, 698" "

  I can register successfully on CUCM with Jabber for Windows and Android via the highway but not SX20.

  are there any other document or guide describing how to configure the SX series in such cases? or someone who had these lab or deployment?

  Thank you!

  Take a look at the Guide deployment of MRA, to check what you have done and set up all the pieces.  Looks like you're missing the SIP domain on the highway, see "setting up the Expressway-C" on pg 20.

• Disconnect a direct IO module in Production without interruption!

  Hello

  I have this problem I got the F0864 error code.

  I have read that the solution is to unplug the i/o module and plug it in again and then do a reset (reboot) of the IO module!

  I wonder if I can do this without any interruption in the environment?

  I have 2 i/o modules in the chassis which is connected to connect different fabrics, so I think I can do this, but I'm not sure :)

  Stig,

  This can be done safely IF:

  1. you have 'Failover' enabled in the Service of each blade profile. Select the server you want to check on > go to the general tab > click on the name of the service profile which is below the UUID of the server > go to the "Network" tab > choose the vNIC (one at a time) > click on 'Edit' at the bottom > and under the 'Fabric ID' field, you should be able to see a box for "enable tipping".< this="" will="" show="" you="" if="" you="" have="" failover="" at="" the="" hardware="" level="" for="" ethernet,="" for="" storage,="" you="" will="" need="" to="" have="" multipath="" configured="" or="" redundancy="" on="" the="" way="" to="" san="" somehow="" (if="" connected="" to="">

  2. If the foregoing is not preseent, you might have configured redundancy by NIC binding the BONE level (aggregation)

  Bottom line is, as long as you have redundancy configured via Profile Service or BONES, a reset of the IOM should not be disruptive, but it is important to ensure that there is redundancy configured before performing any removal of material.

  I hope this helps, but I would like to know if there are more doubts.

  -Kenny

• Registration of telepresence SX10

  Hello

  When I try to save the SX10 in CUCM, I found that the device type is not available. There is only the SX20. I tried with the SX20 device profile, but it does not work. The current version of CUCM is 9.1.1.20000 - 5.

  Please notify

  You must upgrade to 9.1 2 and then apply a DevPack

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/compat/matrix/cm...

• How to add the field or a query to THE field of the process send e-mail Page

  Hello world

  Can you help me please?

  How can I add a field or a query in "to THE" field of the process to send a Page in e-mail?

  I use the 4.1.0.00.32 and oracle 10g Express Application.

  Hi User11131067, please update your grip via profile to something more personal.

  Here's how I did it:

  DECLARE

  l_body CLOB.

  l_to VARCHAR2 (255);

  BEGIN

  l_body: =.

  "Thank you for your interest in the APEX_MAIL package."

  || UTL_TCP. CRLF

  || UTL_TCP. CRLF;

  l_body: = l_body | "Sincerely,". UTL_TCP. CRLF;

  l_body: = l_body | "Dev APEX team | UTL_TCP. CRLF;

  -Get the email addresses of administrators from point of harvest

  WITH the admins

  AS (SELECT person_tbl.email_address_txt,

  ROW_NUMBER () OVER (ORDER BY email_address_txt) rn,

  COUNT (*) NTC)

  OF harvest_admin_tbl, person_tbl

  WHERE harvest_admin_tbl.active_ind = 'Y' - use active Admins only

  -Eliminate Admin Act

  AND harvest_admin_tbl.internal_employee_id <> v_payroll_id

  AND harvest_admin_tbl.internal_employee_id =

  person_tbl.employee_ghrs_id)

  -Concatenate addresses into a single string

  SELECT LTRIM (SYS_CONNECT_BY_PATH (email_address_txt, ",") ",") catvalues

  IN l_to

  Admins

  WHERE rn = NTC

  START WITH rn = 1

  CONNECT BY PRIOR rn = rn - 1;

  apex_mail. Send (p_to => ' [email protected]', - change to your email address)

  P_FROM-online l_to

  p_body-online l_body,

  p_subj => 'APEX_MAIL Package - message in plain text');

  END;

  /

• Profile of power Windows 7 via GPO preference [HELP!]

  I have a requirement to configure a profile of power by default for a client so that users should be able to change the settings in the profile, according to your needs, without administrator rights.

  The issue was that, initially, the power profile has been installed and managed by the component of the power management of SCCM, which locked the power settings and not allow all users to modify. At the time current, power via SCCM management was turned off, and a GPO of the user preference has been applied to set up a default power for all users profile; the GPO applies successfully and sets up the profile of power by default, but end users are unable to edit the profile of power on Windows 7. It still shows locked for editing even if the new power profile is configured and chosen as the active one. I tried via a GPO based computer preferably as well, but no luck. I also tried to remove all policies that configure the profiles of power, and I'm sure the SCCM power management is disabled. I also know that there are not other policies that configure the power settings.

  It worked for another client, however, the power profile has been set up as a user based GPO preference and users are able to modify it as see fit them. The only difference with this client, is that, initially, SCCM managed power settings via the power management component.

  How can I do to try to solve this problem and set up a profile of power via a GPO that allows users to change settings as they see fit? I already checked everything that could possibly be verified. The last resort is to try and recreate the image on one of the test computers and check to see if that solves the problem, but it is not a solution since this customer has 30 thousand machines in their environment. Any help will be much appreciated.

  Hi Cajetan,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Somehow, I lost a user profile. I'm sure I have it has not deleted, but is no longer appears when I start Firefox.

  I think it is after an update that shows only one profile. I no longer get a choice of profiles that Firefox has just opened. Can I retrieve my other profile. And if so, how?

  Thank you!

  Do you mean that the Profile Manager does not start?

  • http://KB.mozillazine.org/Profile_Manager

  Make sure that all Firefox processes are closed to show the Profile Manager if you launch Firefox with the '-p' command line switch.
  You can check under the processes tab in Windows Task Manager.

• ActiveSync via Bluetooth: no available ActiveSync profile

  I have an another laptop computer manufacturers under XP Pro with a stack of Toshiba BT (v.4.31.02 (D)) and a Toshiba BT mini-PCI card (though renamed as Wireless 360 Bluetooth Module).

  I would like to be able to synchronize my PDA (a T-Mobile MDA Vario2 running Windows Mobile 5) to your PC via ActiveSync (I have installed v.4.5) but I suck. Most is that when I set up the partnership between the PDA and the PC, only profiles I see are wireless stereo and the Serial Port.

  The ActiveSync profile is not displayed. I read the document how to make here and the help in the actual stack file, but any COM port I select, via the Bluetooth COM Local application and the ActiveSync connection settings dialog, I can't always this ActiveSync profile to appear.

  Any help and advice gratefully received.

  Martin.

  Hello

  According to your message, I presume that you have already checked the help documents which can be found here:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  To be honest, I never connected your device to a PC, but another Pocket PC.
  Usually, you go to the Pocket PC BT settings and there you have to select Tools-> search for the device.
  Then tab hold ActiveSyncPC and select Update service.

  Then you should see the name of the service. There, you have to tab and hold the 7 COM and select ActiveSync for registration. Then, you can enter any login name and then tab OK. Now, you can configure some settings of ActiveSync. If you don t have an existing partnership, you should uncheck Auto Connect ActiveSync and tab on OK

  Perhaps this little education could help a little.

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How can I control the elements in the graphic palette (profile line) via the property node?

  Hello everyone,

  Is it possible to control the elements (graphic palette in the profile of the line) via the property node?

  Greetings zapfle

  In general, you must balance only Min/max property, then you can "zoom and Pan" by program:

  

  Andrey.

• Is there a way to remove the profiles via the registry setting or vbscript?

  Original title: user profiles are not deleted

  I used delprof in windows xp, in a script, to remove cached user profiles, but it does not work for Vista Ultimate. I tried reprof but the characteristics of certina if Vista prevents the Remprof of work corre4ctly. I also used the GPO setting on the client system Vista. I put the time of deletion for all the two days. Because it requires a reboot I had put Scheduler Restart every two days.  User profiles were still on the system after reboot. Is there a way to remove the profiles via the registry setting or vbscript?

  Hello gregzig,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the Technet forum. Following your question thanks for posting the link below:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• cannot SX20 one access via web or factory can put it

  Hi all

  We have a SX20 unit that worked very well as autonomous, then we bought BE6000S and wanted to connect the SX20 to the BE6000S.

  However the next day when want to start the configuration, we cannot access the SX20 thru web even if there is a response through ping... I tried the rest of the factory the SX20, and when I followed the steps from the rest when I press the power button 2 times it will turn off...

  is it possible that I can do the rest via a remote control or no Internet?

  the SX20 software version is TC6.3.0.3d8e7d1

  Hello

  1. check connectivity between your PC and the SX20.

  Open a cmd prompt and telnet address IP of the SX20 with port 80/443

  Telnet 80

  or

  Telnet 443

  Cmd it goes blank if these ports are open.

  2. check setting by using the remote control:

  Settings > admin settings > Network Services

  HTTP mode: WE

  Also check the settings of the proxy network on your PC. It shouldn't proxy configurations.

  Check out this guide to the administrator on how to factory reset the SX20 codec using the power button. See page 125.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/quick-set-SX20/TC6/administration_guide/SX20-QuickSet-Administrator-Guide-tc63.PDF

  Kind regards

  Acevirgil