Symantec AntiVirus recommended for the database oracle on windows server 2003
Hi allI have a server of oracle database on the windows server 2003 version 10.2.0.4 platform. What are best practices for symantec antivirus running on this server, but the database of their scanning file exclusions.
My server restarted unexpectedly for many times. I have in the log of event id 6008. What can be the cause of it... ?
How to configure the anti-virus protection on Windows Server that is running the database Oracle [ID 782354.1]
Tags: Database
Similar Questions
-
I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'
I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.
Can someone help me?
Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.
(I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)
1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):
2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:
This one is for external access to the Internet:
And this one for intranet communications AD:
3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:
For Internet access:
Then, you need allow this connection to share:
And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:
4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.
5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:
6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):
7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!
Continue with steps [5-7].
-
How to determine the level of Group of patches for the database Oracle EBS Server?
Dear
How findout patches for the database server Oracle EBS group level i.e. 10.2.0.3?
ConcerningDear Suzy,
I was looking for a patch of database being upgraded. After the database owner (enviroment) to supply file, I used the following command from $ORACLE_RDBMS_HOME/OPatch directory, command like $ OPatch lsinventory, he listed all the patches and updated patch also.
'OPatch lsinventory' must list all patches applied to $RDBMS_ORACLE_HOME. For the level of database of the Group of hotfixes, you can use one of the instructions above to get the version. In addition, you can check to the BONE by running executable files (i.e. sqlplus, impdb... etc).
And on request, I used-> -use $AD_TOP/sql/adutconf.sql , it is perfectly correct.
Ok.
But I can't go through of OAM,-diagnostics of Applications using, you can guide me. When I select plan of the site-diagnosis & repair - run diagnostic tests, it error. Say year error has occurred!
Please note: you don't have sufficient privileges to perform this function.OAM and Diagnostics Applications are two different things.
Diagnostics of applications can be run from "Oracle Diagnostic Tool".
Note: 358831,1 - E-Business Suite Diagnostics run Instructions
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=358831.1Note: 167000.1 - Installation Guide for E-Business Suite Diagnostics
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=167000.1For the Group of hotfixes in OAM, follow the steps described in the following note:
Note: 550654.1 - how to get patches Oracle Applications products in R12 group level
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550654.1Kind regards
Hussein -
I use Windows Server 2003 R2 SP2 as a file server. I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user. I then share an output folder. User 'A' is using Windows XP SP3 to connect to this shared folder. However, when I try to connect, Windows reappear to enter user name and password. I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all. Correct me if I heard wrong.
If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.
If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?
http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx
You will need to repost the above Server forums.
Here is the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Language in grayed when installed on the English version of Windows Server 2003
Hello
I have a problem during the installation of Adobe Reader software using the suite of packages:
Turkish AdbeRdr1010_tr_TR.exe
Turkish AdbeRdr11000_tr_TR.exe
Chinese AdbeRdr11000_zh_CN.exe
Chinese AdbeRdr1010_zh_CN.exe
Greek AdbeRdr10110_el_GR.exe
I tried to install their (a) on the Windows Server 2003 (English version). They install without error but when I try to launch them they come with the dialog box to select the English language and of required languages are unavailable / greyed out.
(For the Chinese language I 'Control Panel > regional and Language Options > languages tab > install files for East Asian languages checked ').How can I activate these languages so that Adobe Reader software would result in the language that I need.Kind regards
In the case where if someone had the same problem, here is a solution:
Go to the window > Control Panel > regional settings > Advanced tab.
Set the field under: "Select the language that matches the version of non-Unicode programs you want to use" to the language you want to use.
Apply the changes.
Windows may require a restart.
Go to Adobe reader and in language settings, change the option to choose the language at the start of adobe.
When you re-breakfast Adobe language you need should be available.
-
Allocation of the CPU 4 to Windows Server 2003 questions?
Hi all
I have a VM with Windows Server 2003 R2 SP2 64-bit running as a virtual machine, and when I assign the 4 CPU, it shows only one? Is it by design or it should show all 4 in the information system?
Search for new hardware? Have you checked the HAL in Device Manager to verify that this is a multi HAL processor?
-
Cannot print to the PDF printer in Windows server 2003 x 64 (Adobe 9 STD)
Hello world
I'm running a very weird question. We are using Citrix Presentation Server 4.5 in our environment. Recently I installed the x 64 bit version of Citrix on top of Windows Server 2003 x 64.
The problem we experience now is that when the user opens a WORD or EXCEL document and try to print to PDF. SAVE it in windows appears to allow users to save, but nothing happens then. In a Word, no PDF file is created.
However, if I ask the user to right click on the file (in windows Explorer) and select Convert to PDF, and then the conversion going on.
Do you know a solution for this?
Don't know what you're trying to do, but it sure looks like a used Acrobat server. If this is the case, you will need to find another solution. Acrobat is only allowed for the use of the single computer and use on a server is clearly in violation of the EULA. The wording has been explicitly added with AA5 I recall.
-
After changing the password in windows server 2003, when the new password take effect?
Hello
In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Hope the information is useful.
-
How can we forget the administrator password in Windows Server 2003?
How TO log in FORGOTTEN PASSWORD WINDOWS SERVER 2003 STANDARD EDITION administrator
Why are you asking a question of Windows Server 2003 in this forum? What is there to do with the upgrade and activation of Windows XP installation?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
I am in the application log in windows server 2003 the following ID 1030 and 1058 sourse userenv
In windows server 2003, I get in the newspaper of the applications of the following ID 1030 and 1058 sourse userenv .please help to close.
Why are you asking a question of Windows Server 2003 in a Windows XP forum?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit
We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.
Any guidance appreciated.
concerning
Madre
Hello
It's all sorted out.
concerning
Madre
-
I can't change the field to the Working Group in windows server 2003
I can't chang area Workgroup
the identification of the computer can no. ' t be changed because the servec of CA is installed on the computer of teas
I have windows 2003 ServerHello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for support on Windows Server. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
-
Unknow Device for HP DL380 G7 using Windows Server 2003 32-bit
I need help to identify the right Windows 2003 SP2 32-bit driver for an unknown device in the Device Manager on a HP DL380 G7 server. I have attached a screenshot. The only information than the other, is that the device can be a PCI ISA device.
Any help is greatly appreciated, if I'm in the wrong forum, please send the correct forum.
Thank you
Robert Jung
I found the problem, it's actually in a HP ProLiant Pack driver called: cp010950.exe attached is the image of the named driver: HP NULL IPMI Controller Driver for Windows 2003 version 1.0.0.0
-
Move the database on its own server Vcenter 4
My current Vcenter Server 4.0 has the Vcenter Server and database SQL 2005 on the same computer. My performance is EXTREMELY slow, as in there more than 15 minutes for the client to connect, Vsphere load inventory and discover plugins until I'm able to use it. Once loaded, clicking on the servers and things within the client is very slow. So I think that by moving the database of its own machine, it will increase the performance of the vcenter server. I was looking in the vcenter admin section, and I can't find a way to 'clear' to tell him to look for the database on a different server.
Does anyone have any documentation on how to move the vcenter database to another server?
Thank you!
Lex
Take a look on:
http://KB.VMware.com/kb/7960893
André
-
INS-20802 Oracle net configuration assistant failed on windows server 2003 R2
Hi all
I have windows server 2003 r2 installed on the virtual machine and tried to install oracle database 11g r2.
But I got Oracle net configuration assistant failed. Here is the log
INFO: This variable JRE_HOME is not added to the map of global context
INFO: This variable ISQLPLUS_PROTOCOL is not added to the map of global context
INFO: This variable ISQLPLUS_PORT is not added to the map of global context
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the map of global context
INFO: This variable HOSTNAME is not added to the map of global context
INFO: This variable EM_UPLOAD_DISABLE is not added to the map of global context
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the map of global context
INFO: This variable EMPRODVER is not added to the map of global context
INFO: This variable CONSOLE_MODE is not added to the map of global context
INFO: This variable CONSOLE_CFG is not added to the map of global context
INFO: This variable sl_oraclehomes is not added to the map of global context
INFO: This variable s_oc4jDir is not added to the map of global context
INFO: This variable s_oc4jAppsDir is not added to the map of global context
INFO: This variable s_jreHome is not added to the map of global context
INFO: This variable s_configcommand is not added to the map of global context
INFO: This variable b_isRAC is not added to the map of global context
INFO: This variable b_UNIX is not added to the map of global context
INFO: This variable OJSP_JAR_LOC is not added to the map of global context
INFO: This variable OJSPUTIL_JAR_LOC is not added to the map of global context
INFO: This variable LDAP_JAR_LOC is not added to the map of global context
INFO: This variable JAVA_HOME is not added to the map of global context
INFO: This variable ISQLPLUS_HOST is not added to the map of global context
INFO: This variable EM_UIX_LOCATION is not added to the map of global context
INFO: This variable EM_REPOS_HOST is not added to the map of global context
INFO: This variable EM_PING_COMMAND is not added to the map of global context
INFO: This variable EM_OC4J_HOME is not added to the map of global context
INFO: This variable EM_EAR_LOC is not added to the map of global context
INFO: This variable EMDROOT is not added to the map of global context
INFO: Adding the s_oc4jAdmPasswd to the oracle.sysman.console.db global variable
INFO: Addition of the variable s_oc4jAdmPasswd to the global context for the whole oracle.sysman.console.db map
INFO: This variable s_launchBrowserClasspath is not added to the map of global context
INFO: This variable s_javapOracleHome is not added to the map of global context
INFO: This variable PROD_HOME is not added to the map of global context
INFO: {parameter: TOPLEVEL_COMPONENT in {aggregate: OuiConfigVariables:1.0.0.0.0:common}}: parameter data type is not compatible with the supplied String table.}}
INFO: passing params in fact FC
INFO: saves info by CF
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint: didn't found Checkpoint to return to getAllFailedCheckPoints.
INFO: Checkpoint: didn't found Checkpoint return null for getLastFailedCheckPoint.
INFO: Checkpoint file: Index written and updated
INFO: Checkpoint: file transfer remote node
INFO: update the global context
INFO: Path to "globalcontext.xml" = C:\oracle\product\11.2.0\dbhome_1\install\chainedInstall\globalcontext
INFO: Since the operation, move the current OiicAPISessionDetails to list installed
INFO: Number of root to run scripts = 0
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Finished implementing InstallDB
NEWS: Execution of the Configuration
INFO: Enter ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId is oracle.server
INFO: Enter ConfigClient.initClientAndSession method
INFO: Status ConfigClient.initClientAndSession: connected to the framework of config
INFO: ConfigClient.initClientAndSession session started oracle.sysman.emCfg.client.CfwSession@c0d228
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1257f0e
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exit ConfigClient.init method
INFO: Phone event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream, called method
INFO: Enter ConfigClient.getToolsList method
INFO: Created the config for Oracle Net Configuration Assistant job
INFO: Created the config for the Oracle Database Configuration Assistant job
INFO: update of transitional settings in aggregates
INFO: update of transitional settings for oracle.server
INFO: update of transitional settings for oracle.assistants.netca.client
INFO: update of transitional settings for oracle.assistants.server
INFO: Allocation of transitional value variable s_dbcaArgs
INFO: Transitional S_SYSMANPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_systemPasswordFlag
INFO: Allocation of transitional value variable s_sysmanPasswordFlag
INFO: Transitional S_HOSTUSERPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbcaArgsOverride
INFO: Allocation of transitional value variable windows_commandline_prefix
INFO: Allocation of transitional value variable s_sysPasswordFlag
INFO: Transitional S_SYSPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_asmsnmpPasswordFlag
INFO: Transitional S_DBSNMPPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbsnmpPasswordFlag
INFO: Transitional S_ASMSNMPPASSWORD variable value assignment
INFO: Transitional S_SYSTEMPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_hostUserPasswordFlag
INFO: update of transitional settings for OuiConfigVariables
INFO: update of transitional settings for oracle.sysman.ccr
INFO: update of transitional settings for oracle.sysman.console.db
NEWS: Updated transitional settings in aggregates
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = true, $*.
INFO: Creates a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak
INFO: Enter ConfigClient.executeToolsInAggregate method
INFO: ConfigClient.executeToolsInAggregate oAggregate = oracle.server:oracle.server:11.2.0.1.0:common
INFO: Enter ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1ae9cec
NEWS: Action of ConfigClient.assignAction is of type: configuration
INFO: Exit ConfigClient.assignAction method
INFO: Action of affected ConfigClient.executeToolsInAggregate
INFO: Started named Plugin: Oracle Net Configuration Assistant
INFO: Found associate job
INFO: From 'Oracle Net Configuration Assistant.
INFO: From 'Oracle Net Configuration Assistant.
INFO: Exception loading native library UnsatisfiedLinkError: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome (Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome (unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main (NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services Configuration failed. The exit code is 1
INFO:
CAUTION:
INFO: Finished named Plugin: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: Action completed ConfigClient.executeToolsInAggregate
INFO: Exit ConfigClient.executeToolsInAggregate method
INFO: Phone event ConfigToolsExecuted
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = false, $*.
INFO: Creates a new file C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak
WARNING: don't output Readme.txt file
INFO: ConfigClient.saveSession, called method
INFO: Phone event ConfigSessionEnding
INFO: ConfigClient.endSession, called method
INFO: Setup
INFO: Closing OUISetupDriver.JobExecutorThread
INFO: Cleaning, please wait...
INFO: Eliminate the object box to install controls
INFO: update of the State of STATE_CLEAN computer
INFO: Forked all the tasks are completed to the configuration of the State
Full background information: Operations
INFO: Moved to declare < configuration >
NEWS: Execution of the Configuration
INFO: Enter ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId is oracle.server
INFO: Enter ConfigClient.initClientAndSession method
INFO: Status ConfigClient.initClientAndSession: connected to the framework of config
INFO: ConfigClient.initClientAndSession session started oracle.sysman.emCfg.client.CfwSession@140de18
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@1b52041
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exit ConfigClient.init method
INFO: Phone event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream, called method
INFO: Enter ConfigClient.getToolsList method
INFO: Work by selecting named 'Oracle Net Configuration Assistant' to try again
INFO: Work by selecting named "Oracle Database Configuration Assistant' to try again
INFO: update of transitional settings in aggregates
INFO: update of transitional settings for oracle.server
INFO: update of transitional settings for oracle.assistants.netca.client
INFO: update of transitional settings for oracle.assistants.server
INFO: Allocation of transitional value variable s_dbcaArgs
INFO: Transitional S_SYSMANPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_systemPasswordFlag
INFO: Allocation of transitional value variable s_sysmanPasswordFlag
INFO: Transitional S_HOSTUSERPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbcaArgsOverride
INFO: Allocation of transitional value variable windows_commandline_prefix
INFO: Allocation of transitional value variable s_sysPasswordFlag
INFO: Transitional S_SYSPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_asmsnmpPasswordFlag
INFO: Transitional S_DBSNMPPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbsnmpPasswordFlag
INFO: Transitional S_ASMSNMPPASSWORD variable value assignment
INFO: Transitional S_SYSTEMPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_hostUserPasswordFlag
INFO: update of transitional settings for OuiConfigVariables
INFO: update of transitional settings for oracle.sysman.ccr
INFO: update of transitional settings for oracle.sysman.console.db
NEWS: Updated transitional settings in aggregates
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = true, $*.
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.1
INFO: Enter ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate = oracle.server:oracle.server:11.2.0.1.0:common
INFO: Enter ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@b970f5
NEWS: Action of ConfigClient.assignAction is of type: configuration
INFO: Exit ConfigClient.assignAction method
INFO: Action of affected ConfigClient.executeSelectedToolsInAggregate
INFO: Started named Plugin: Oracle Net Configuration Assistant
INFO: Found associate job
INFO: From 'Oracle Net Configuration Assistant.
INFO: From 'Oracle Net Configuration Assistant.
INFO: Exception loading native library UnsatisfiedLinkError: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome (Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome (unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main (NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services Configuration failed. The exit code is 1
INFO:
CAUTION:
INFO: Finished named Plugin: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: Action completed ConfigClient.executeSelectedToolsInAggregate
INFO: Exit ConfigClient.executeSelectedToolsInAggregate method
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = false, $*.
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.1
WARNING: don't output Readme.txt file
INFO: ConfigClient.saveSession, called method
INFO: Phone event ConfigSessionEnding
INFO: ConfigClient.endSession, called method
INFO: Setup
NEWS: Execution of the Configuration
INFO: Enter ConfigClient.init method
INFO: ConfigClient.init sOracleHomeLoc=C:\oracle\product\11.2.0\dbhome_1, sTopAggId is oracle.server
INFO: Enter ConfigClient.initClientAndSession method
INFO: Status ConfigClient.initClientAndSession: connected to the framework of config
INFO: ConfigClient.initClientAndSession session started oracle.sysman.emCfg.client.CfwSession@969e08
INFO: ConfigClient.initClientAndSession m_oAggregate=[Loracle.sysman.emCfg.common.IAggregate;@6155e3
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO: Exit ConfigClient.init method
INFO: Phone event ConfigSessionInitialized
INFO: ConfigClient.registerOutErrStream, called method
INFO: Enter ConfigClient.getToolsList method
INFO: Work by selecting named 'Oracle Net Configuration Assistant' to try again
INFO: Work by selecting named "Oracle Database Configuration Assistant' to try again
INFO: update of transitional settings in aggregates
INFO: update of transitional settings for oracle.server
INFO: update of transitional settings for oracle.assistants.netca.client
INFO: update of transitional settings for oracle.assistants.server
INFO: Allocation of transitional value variable s_dbcaArgs
INFO: Transitional S_SYSMANPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_systemPasswordFlag
INFO: Allocation of transitional value variable s_sysmanPasswordFlag
INFO: Transitional S_HOSTUSERPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbcaArgsOverride
INFO: Allocation of transitional value variable windows_commandline_prefix
INFO: Allocation of transitional value variable s_sysPasswordFlag
INFO: Transitional S_SYSPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_asmsnmpPasswordFlag
INFO: Transitional S_DBSNMPPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_dbsnmpPasswordFlag
INFO: Transitional S_ASMSNMPPASSWORD variable value assignment
INFO: Transitional S_SYSTEMPASSWORD variable value assignment
INFO: Allocation of transitional value variable s_hostUserPasswordFlag
INFO: update of transitional settings for OuiConfigVariables
INFO: update of transitional settings for oracle.sysman.ccr
INFO: update of transitional settings for oracle.sysman.console.db
NEWS: Updated transitional settings in aggregates
Information: Directory of newspapers Configuration - C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = true, $*.
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolAllCommands.bak.2
INFO: Enter ConfigClient.executeSelectedToolsInAggregate method
INFO: ConfigClient.executeSelectedToolsInAggregate oAggregate = oracle.server:oracle.server:11.2.0.1.0:common
INFO: Enter ConfigClient.assignAction method
INFO: ConfigClient.assignAction actionref=[Loracle.sysman.emCfg.common.IActionReference;@1e976fd
NEWS: Action of ConfigClient.assignAction is of type: configuration
INFO: Exit ConfigClient.assignAction method
INFO: Action of affected ConfigClient.executeSelectedToolsInAggregate
INFO: Started named Plugin: Oracle Net Configuration Assistant
INFO: Found associate job
INFO: From 'Oracle Net Configuration Assistant.
INFO: From 'Oracle Net Configuration Assistant.
INFO: Exception loading native library UnsatisfiedLinkError: oranjni11
INFO: java.lang.UnsatisfiedLinkError: C:\oracle\product\11.2.0\dbhome_1\BIN\oranjni11.dll: can't find dependent libraries
WARNING: java.lang.UnsatisfiedLinkError: jniGetOracleHome
WARNING: at oracle.net.common.NetGetEnv.jniGetOracleHome (Native Method)
WARNING: at oracle.net.common.NetGetEnv.getOracleHome (unknown Source)
WARNING: at oracle.net.ca.NetCALogger.getOracleHome(NetCALogger.java:230)
WARNING: at oracle.net.ca.NetCALogger.initOracleParameters(NetCALogger.java:215)
WARNING: at oracle.net.ca.NetCALogger.initLogger(NetCALogger.java:130)
WARNING: at oracle.net.ca.NetCA.main (NetCA.java:408)
INFO:
INFO: Error: jniGetOracleHome
INFO: Oracle Net Services Configuration failed. The exit code is 1
CAUTION:
INFO:
INFO: Finished named Plugin: Oracle Net Configuration Assistant
INFO: Oracle Net Configuration Assistant failed.
INFO: Oracle Net Configuration Assistant failed.
INFO: Action completed ConfigClient.executeSelectedToolsInAggregate
INFO: Exit ConfigClient.executeSelectedToolsInAggregate method
INFO:
The developed /runconfig command is C:\oracle\product\11.2.0\dbhome_1\oui\bin\runConfig.bat ORACLE_HOME=C:\oracle\product\11.2.0\dbhome_1 MODE = action = configure RERUN = false, $*.
INFO: The option is to replace the existing C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands file, it saves
INFO: The backup file is called C:\oracle\product\11.2.0\dbhome_1\cfgtoollogs\configToolFailedCommands.bak.2
WARNING: don't output Readme.txt file
INFO: ConfigClient.saveSession, called method
INFO: Phone event ConfigSessionEnding
INFO: ConfigClient.endSession, called method
INFO: Setup
Hi Srini,
The problem is resolved. Thanks for your reply.
The question is, is Windows server 2003 32-bit, and I try to install database 11g 64 bit. I tried to install database 11g 32-bit. Before that, I erased the traces of the virtual machine in my host system and reinstalled and tried. It worked.
Thank you
Sunil
Maybe you are looking for
-
On my desktop, private browsing windows have a mask icon in the upper right corner, but on my computer at home, there is none. Both work in Windows 7. It is not a problem, but I do not see the icon to remind me that I am using private browsing.
-
Satellite M40-CD/DVD drive disappeared
My CD/DVD drive has disappeared from my COMPUTER and won't read any CD the CD alone, it will read is the recovery CD. It must be a software problem, but I don't know how to sort. Anyone have any ideas? It's out of warranty so back to toshiba will cos
-
LV FPGA workflow nested CLIP w / NI SMU-6591R
Hello I develop an application on a NI-SMU-6591R Board. My installation also includes a SMU-1085 w chassis / controller 8135. Goal: set up a VHDL project prior to the Commission of 6591R. Given that the application requires access to 2 ports Mini SAS
-
After sorting on the bad memory modules causing sporadic restarts my system is always showing behavior strange but much more less than before... Sometimes the laptop restarts when I work with her without warning, this happens maybe once every 3 days
-
Need help on restoration.