Symbols disappear between 2 monitors

Similar Questions

• Move windows between multiple monitors

  Move windows between multiple monitors

  You can easily extend your Windows desktop across multiple monitors. A display that spans two monitors or more significantly increases your screen area so that you can drag windows and program icons anywhere on the desk of theextended.

  By default, when you connect another monitor, the image of your desktop appears on each monitor display. Before you can drag a window from one display to another, you must change your display setting toExtended. For more information, see Set up multiple monitors.

  I can't do it in my compuer whay?

  You can't do that if you are under Vista Home Basic.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-multiple-monitor-problems

  Solving the multiple monitor problems

  Here are solutions to some common problems with connecting, setting up and working with multiple monitors.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/multiple-monitors-frequently-asked-questions

  See if the information above helps you.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Mobile between two monitors

  I am running Windows 7 Professional and have my laptop set in place with an additional monitor. I have the additional monitor to the left of my laptop, but I can only drag from left to right. Surprisingly, I couldn't find another post on this issue.

  Hi Robert,.

  Thanks for posting on the Microsoft answers Forum.

  You mentioned in the post that your laptop is configured with an additional monitor.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  Are you unable to drag windows between multiple monitors?

  This problem can occur because of incorrect settings for multiple display.

  There are a several screens to move windows between multiple monitors.

  Please see the article to find out how move windows between multiple monitors.

  http://Windows.Microsoft.com/en-za/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  I hope this helps. Please let us know if the problem still persists.

• Symbol disappears after the motion tween

  Interpolation of my work, but on the frame after the end of the keyframes, the symbol disappears. I was expecting just to stay in place and continue to be part of the image. How to stay on the screen?

  You can in another layer, place the playhead in the end keyframe even then press F9 (to open the code of the Panel) and type
  Stop ();
  
  
  This will stop the movie in this framework.

  Or you can press F5 (in the Tween layer), to "extend the framework of several frames.

  Select with the mouse the images all the remains, then right-click and select Remove frames

  Post edited by: Sujatha PJ

• Output VGA jumps between external monitor and Satellite L505

  I have a Satellite L505-144 related to an external VGA monitor via a KVM Aten 2-way switch.

  Intermittently on the screen of the external monitor black background, the image will transfer to the screen of the laptop for a second before returning to the external display. This does not seem to be triggered by any particular measure of keyboard or mouse and doesn't seem to be time bound.

  The keyboard and mouse connected to the KVM seem unaffected. I have the latest video bios motherboard and all the latest drivers Toshiba comes out loaded.
  To test the KVM I connected a Toshiba NB200 L505, stops problem instead, replace the L505, it comes back.

  The question is not performed by the presence of a second PC connected to the KVM. I have tried with a second PC on and outside, connected and unconnected, is still no change in the problem.

  I spent the autour KVM cables and the problem persists and follows the L505. If I connect the L505 directly to monitor the problem disappears!
  I find its a problem between the KVM and the L505.

  Is there a known fix or get around it?
  Is there a guarantee if I get a Belkin KVM say this question with the L505 will not happen with this material as well?

  At first, I have to say that I n t believes that Toshiba offers fix for this. Toshiba doesn't support the use of third-party products part so if there are a few possible correction or bypass ATEN ought to know this.

  Connect any external devices you use directly on your Satellite L505, try features and let us know f you have a problem similar or any other.

• Keyboard shortcut to move a window between two monitors instead of drag and drop.

  I want a quick way to move a window from one monitor to the other in a double configuration monitor without having to drag the window with the mouse. This is particularly useful for full screen windows since to move, I have to exit full screen, catch them with the mouse and drag them to the other monitor. Ideally, I want something I can do with a keyboard shortcut.

  I don't know if this exists, I couldn't find it in a list of keyboard shortcuts. I think it would be an improvement for anyone to use multiple monitors which has good reason to need do to switch between several programs. Since windows looks at multiple monitors and identifies each in the settings of customization like 1, 2, 3, etc, it would make the most sense for me to have one high and one low. So if I have a window screen 2, I can hit a keyboard shortcut to move it to the same spot on monitor 1 (low) or monitor 3 (upwards).

  Maybe it exists in form some and I don't find it not, but if not I think it would be very useful, especially for anyone doing graphic design or programming work.

  (Also I filled out the form for that matter like windows 7, which is what I use at home, but he put it under the XP forum since that is what the computer I write from is running on.)

  Use the following key combination to switch between screens.

  "Windows key + SHIFT + key.

  Detailed instructions:
  Press in and hold the Windows key and then add and hold down the SHIFT key. While now hold both hit the left or right arrow key to move the current active window left or right.

• Volume mixer symbol disappears from desktop wallpaper

  The volume mixer symbol has mysteriously disappeared from the bottom right of my screen, where I would normally find it.  How to make it go back?

  I know there are always on the computer, since when I look in 'help' on the volume mixer and follow the link there, voila!  the volume mixer appears on my screen.

  Any ideas?

  Hi Taikod,

  Thank you for using answers.microsoft.com for your Windows Vista questions.

  We will try to help you with this problem.

  1. Right-click on an empty spot in the taskbar or click the start ORB - in the search line, type the task bar.
  2. From the right click the taskbar, select PROPERTIES, or programs list right click on taskbar and Startmenu.
  3. In the list that appears, select the Notification area
  4. Under system icons, place a check in the box to the left of the VOLUME
  5. Click on apply
  6. Click OK

  The volume icon should be listed in the taskbar at the moment.  If it is not then check the connection that is used has administrative privileges.

  Please let us know if we can help you by involving more this problem or if the problem has been resolved.

  Once again, please use the forums of answers.microsoft.com.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• How can I move my cursor back between two monitors?

  I have two screens and I would use two separate software at the same time.  To do this, I need to know a quick way to move the cursor back between the two monitors.

  Thank you

  Doug AC

  The only way is to drag your cursor to the other monitor.

• Tool of Photoshop keyboard shortcuts do not work between two monitors

  Hello

  My friend works on Photoshop CS6, with 2 monitors and a Wacom tablet. Keyboard shortcuts do not work for one of its tools, brush sizes etc... It must manually, click on each individual tool and resize brushes, makes his workflow much slower. The keyboard works with other programs and the Wacom tablet works fine.

  For example, when making a mask and using the Brush tool, it can select B for the Brush tool. Then, as she is brushing, she cannot change the size of the brush, opacity of the brush or press the backslash on the keyboard to see the mask. She must manually, go to the toolbar and click the desired option.

  There seems to be a break with between the 2 monitors and keyboard. Any suggestion would be great.

  Thank you!

  Menus, shortcuts, Lasso tool or Photoshop constantly run when using a Wacom tablet. Mac OS

• Drag and drop does not - symbol disappears when I try to drag

  I have a great animation I do beachfront animate and have already used the plugin jquery draggable several times. However yesterday I made a new symbol for a separate animation, then adds items and turned them into symbols and added the following code to the timeline of symbol on creationComplete:

  sym.$("milk-s").draggable();
  

  I tried with several different symbols, but whenever I check it in a browser, I click on the symbol to drag and it disappears in the place. I do not understand what I am doing wrong, as that's all the code in the actions of the timeline, and I do not know there is no code on the symbols I want to drag. I also copied and pasted the code from the moveable symbols that worked and changed the name, because they are a little more code for when you begin to drag the symbol.

  Thanks in advance!

  Make sure that your positions in the symbols are set to 0 (top and left) If you do not use an animation in here otherwise your symbols will be moving when you drag because they use these and no symbol registrations on the stage.

• Symbols disappear in the preview and publish

  I'm completely new onboard so user error is not unlikely, but I have a small animation with 11 small circles that animate the opacity and Y pos. The circles are all symbols and are controlled (play/stop) on the main timeline. When I saw it, half of them do not appear. Symbols that are not are compatible a preview in the preview. I looked at the items in the browser and they are there, they are not simply animate.

  So I thought that I have would re-create just 'bad' symbols and their animations, but they are still not animating in my preview. When I play the timeline in edge animate evrything is fine.

  I tried it in Chrome, Safari, and Firefox (all latest versions) with the same result.

  Is there a bug symbol on board?

  Is there a method of creating symbols that I should use (others that draw, cmd - Y and change the symbol timeline)?

  All the ideas, because I'm out of them.

  You have added a trigger on the main timeline to 750ms to goto and play 1000 ms. As a result, all the bubbles that begin play between 750ms and 1000ms will not play. Remove the trigger to the 750ms, you will see all the bubbles

  Triggers code will not run in Animate yow will see bubbles but is executed when played on browser

• TB38.3.0, the Lightning disappeared between extensions. Relocation of lightning and update to 38.4.0 did not help. [was: my calendar disappeared]

  I have Thunderbird 38.3.0 on a Windows 7 PC. For some reason any today my calendar with all my appointments simply disappeared. When I went to the Add-ons Manager, lightning was missing in my extensions. I didn't remove it myself.

  I tried to reinstall it. After you restart Thunderbird, Lightning was back to the list of extensions (version 4.0.4.1) but I still have no schedule and no toggle button "today Pane.

  I tried to remove and install again. Still no joy. Help!

  That's what I'll try:
  Determine the folder of your profile through the troubleshooting information.

  In the top right of the Thunderbird window, click the menu button , then select help > troubleshooting information > profile folder > open folder.

  Profile opens in Windows Explorer.

  Close Thunderbird.

  Antivirus real-time scanner snoozes.

  Navigate to the subfolder of extensions and search for a folder {e2fda1a4-762b-4020-b5ad-a41df1933103}. This is the Lightning extension. Delete this folder, if there is.

  If there is a folder "staged" delete it as well.

  Launch Thunderbird and install again the lightning. For Thunderbird 38.4.0 the corresponding version of lightning is 4.0.4.1.

  If it worked this time, turn anti-virus back on.

• Chrome 35, symbols disappeared in game

  Hello

  I make a game on board, down a symbol which is the "main Menu" of the game.

  I did the MainMenu first, and he has been to see the fine in Chrome, later I added all the other game 'images' and text,

  and now Chrome 35 when I open the game I don't see symbols inside the MainMenu

  While in 30 FireFox and IE 11 it's showing fine.

  Please could you take a look, I don't know if it's something I've done or if he is the host of edge.

  Download link: Box

  Thank you

  Paul

  See the edge questions animate: http://helpx.adobe.com/edge-animate/kb/known-issues-edge-animate.html

  There are: Webkit (Safari, Chrome) browsers only: the sensible scaling with symbols breaks element order when the window is larger than the stage. (3632270)

  Missed symbols are shown after resizing the window of the browser for a 60% or less

  on Chrome, Tablet version for Nexus 7 it works fine.

• How can I make a symbol disappear when I'm done with it?

  I have a symbol as pans on the screen when you press a button, and then pans off the screen when you press another button. The problem is that after the symbol slide away, I can no longer click on the buttons in the area he was covering. I tried everything I can think of-sym $("name") () .hide; does not work, sym.getSymbol("name").deleteSymbol (); does not work either and visualize the symbol off of turn after playing also does not work. What I am doing wrong and how can I fix this?

  Ok. This works except for one small thing. The box slides out under the button. But this will give you an idea on how to solve your problem.

  I placed the code btn ready composition and left the close button in the red box.

  https://www.box.com/s/e0dv4zdzdzcoqvuabrp6

  I hope this helps.