Sync up indicates disconnected network drive

Similar Questions

• How to get the dialog box 'Disconnect network drive' with command shell in WIN7?

  I know, when I run the following shell command can get the dialog box "map network drive".

  RUNDLL32 SHELL32. DLL, SHHelpShortcuts_RunDLL connect

  But what is the command to get the dialogue box "Disconnect network drive"?

  Thank you!

  Hello

  Thank you for visiting Microsoft Community.

  I recommend you post your questions on the TechNet Forums for the best and expertise advice. See the link below or more information:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

• Disconnected network drive

  Hello, I installed a Windows 2008 (replacement of a Server 2003) domain server with 5 customers Pro XP. There is a login script that is managed by the workstations when they login to map network drives.  Who is pulled from the server.  On the workstations, when they connect, in my computer, it shows the actions, but they still have the name of the old Server 2003, that is to say the Scans on Windows 2003. I removed the actions of the workstation and restarted. Now, the disks are delivered by saying drive disconnected network (letter): on each of them.  I can click on the drive and it opens upward, but the name never changes. Some people have suggested to turn off saving to the card mode NETWORK has done this. Some have suggested to make you that netlogin is set for automotive services, done. A one of the machines, I've removed the NETWORK card and let windows re - install. That solve the problem of this machine.  Others, however, are always challenging.  At present, the firewall is disabled. No installed antivirus for the time. Any suggestions?

  Thank you!

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 7 x 64 upgrd dv6500z disconnected network drives allow usb drive mapping to the same drive letter

  Hello

  I'm having a problem with the readers of network disconnected allowing for new drive usb to their drive letter mappings. I have my laptop dv6500z home with windows 7 Home premium connected to my router wirelessly with a couple of shares of x 64. Now I turned off, trip and start. All right, the drive letters show as disconnected as they should. Now I plug in a USB key and it corresponds to the drive letter of one of the disconnected actions and not a new, unassigned drive letter. In Explorer, there will still be disconnected action description. Click on it and it accesses all my files on the USB key. In admin tools/disk management, the correct label for the USB key is displayed.

  So is it a problem of HP or just a problem of Microsoft with Windows 7?

  Woody, I was able to replicate that XP is not a bug but a feature. On my laptop, it originally had vista on the c drive and a recovery on the d drive partion. There are about 1 1/2 years I have upgraded Vista to XP. Then recently updated to Windows 7. kept the 3 OS's so I got triple starting capability. Then at home, I added 3 network shares, while I was using a lot of drive letters. When actions are undone, Windows maps a USB key which has not been connected before system one of the disconnected but readers still show in Explorer, the name of the drive on the part of disconnected. However, if the USB is connected to the system before, Windows appears to map a drive letter that he remembered from before.

  In my case, Windows 7 has been installed recently, so there is no remebered for my USB drive letter. I was away from home, so I had a lot of disconnected shares. In addition, now that I got a 3rd OS added to the system, I used a lot of letters from the GET go by car. It's much more likely that I would meet this feature after installing Windows 7.

• System froze for a minute while searching for a missing network drive

  When, for example, browse the files in the Windows Explorer home & network is disconnected, the system tends to freeze for half a minute, as it is waiting for the sharing network address. No processes are active in the Manager of tasks (idling only), but the computer is devoid. This happens on any PC, computers cell phones not only. Does anyone know how to get rid of this behavior, or at least to shorten the waiting period?
  There is a solution to disconnect network drives, but I would like to find something more simple.

  Hello

  Looks like you have mapped some network drives to your operating system.
  I think if you're looking for files or something like that OS trying to get permission to search or enter the network drives.
  But if the network is disconnected from the operating system takes several times to see that.

  I put t know if there is a solution for these issues. But try to google for more details. Maybe you about success. Please report if you find useful information

  Good luck

• Why my network drives mapped reconnect when disconnected from my laptop?

  Whenever I have withdraw my machine it fails to reconnect to a network drive while you are using the wireless. It's quite strange, because if I anchor again it not is not even reconnect on LAN.

  Hi gabrielcervatiuc,

  Connected and disconnected are two different hardware configurations.

  Therefore, you use control different sets in the registry. You must configure the network drives in two configurations.

  Hope this information is useful.

• Map network drive Auto Login password

  Windows XP mapped drive
  Auto login password when the computer is restarted is not correct and therefore prompts the user to enter.
  Self-opening worked before. Yesterday, the password for the server has been changed.
  I disconnected the old drive and created a new drive mapped with the new password and auto-connect on reboot option checked. Player features mapped correctly until the computer is restarted to indicate the user login box with the error message invalid username or password. Enter the password manually will connect the drive. It seems the automatic connection parameters have not last updated the new password and still uses the old password.
  (With disconnecting mapped drive, remap the process of training all our computers Windows XP I have this problem but our Windows computers 7/8 are all working correctly.)

  I found a solution to this.

  1 disconnect a mapped network drive.
  2. connect a network drive, but are not select Reconnect at startup.
  3. restart the computer. The mapped network drive is not there.
  4 map the network again drive. This time select Reconnect at startup.
  5 restart the computer. The mapped network drive will be there and activation it will automatically connect with the password.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• network drive connection

  I try to get LabView to connect to a network with a Username and a password to designated drive to save the data, then disconnect after the data are written.

  I can't have windows automatically connect because it is a 'public' test computer, one that has a name of log shared for several technicians.  I make sure the netdrive maintains individual logon for traceability.

  I've seen a few posts for the use of the tiara, which I do not have or need.

  Any ideas?

  Thank you!

  You can map the network drive using "net use". This is possible via the system exec command.

  'net.
  use"you can specify a drive letter and the user credentials to use. Use of the "/ persistent: no ' flag not to register the connection.

  You can also disconnect a network drive by using the same command (flag "/ delete").

  Hope this helps

  Daniel

• OfficeJet Pro L7580 appears as a network drive in Win7

  I have a new Dell with Win7 64-bit desktop computer.  I installed the printer with last full 64 bit HP software program downloaded from the HP website.  My all-in-one L7580 load on my network as a hard drive.  When I click the link it reports: "LOCATION is NOT AVAILABLE.  Z:\ is not accessible.  An unexpected network error has occurred. "When I right click on the link and select 'Properties', it displays the properties of a typical hard drive and not the properties of a printer.  When I right click on the link and select "Disconnect", it switches off this "Z drive".  L7580 functions perfectly whether or not I let this "Z drive link" in my network list and if I choose to disconnect the drive "Z".  At this point, it's just a boring anomaly.  However, I have a Lexmark Black and white on that same network laser network printer and the Lexmark does not exhibit this behavior.  I have a small home network (cable modem, router 4-port Netgear with two computers and these two printers plugged into the router 4 ports.)  The router assigns the two printers IP addresses and I can connect to the web page internal to each printer with its information and settings just by entering their respective IP addresses in my browser (192.168.1.x).

  Just curious to know if one of the members of the technical forum have some ideas about this anomaly.  Can live with it, I won't if I don't have to.

  I don't think that it is an "anomaly". IIRC, the printer has memory card ports. So when you install the printer software, network drives are created as a reference for the memory card slots. They will appear even if you have all the cards inserted. Even if you remove them now, they will reappear after you restart the PC. All I can suggest is to ignore it.

• HP 750 055xt: clean install / desire / network driver problem

  Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

  Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

  It's not a hardware issue because I can put the other drive and it works fine.

  I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

  All of the suggestions.

  Thank you.

  Hello:

  Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

  See if the W7 directly from Realtek driver works - 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Windows XP Embedded no initialization of network drives

  I'm developing a c# application that runs on Windows XP Embedded and recording data on a network drive. I mounted this drive in Windows like X:\ and set it to "Reconnect at startup.

  However, after the restart, if I run my application, I get an error "could not find a part of the path"X:\filename.csv"
  If I open windows Explorer, the network drive exists. If I double click to open it, the file exists. If I restart the application after you have done this, the application will then work perfectly.
  It seems that even if the disk has been added, it is not initialized at startup and can not be used by applications. Only when you manually select it become initialized.
  Is it possible to automatically initialize this drive to make it accessible?

  Create a batch file to perform the boot container...

  ; delay for 60 seconds
  PING 1.1.1.1 n 1 w 60000 > ZERO
  ; Removes current mapped drive
  NET use x:/d
  ; Remappe drive x
  NET use x: \\ThePcName\TheShareFolderName
  
  
  Right now, your drive is mapped, but it is not set to automatically connect at startup or the network connection is slow, manually by opening the Player X:\ you initialize it.
  The batch file waits 60 seconds in order to give time to pc to establish connectivity network and maps the drive, so the connection to the drive is there before running your program.
  To ensure that your computer never automatically disconnects / times out from the network.
  • Open command prompt
  • Type in net config server/autodisconnect:-1
  • Then press enter

• What could cause my computer to rendomly change the drive letter assigned to a mapped network drive?

  I use a Windows XP Pro SP3 System. We have dipped sharing network and one of them began to change the drive letter assigned periodically through the week that makes a problem in access to frequently used files. No reason as to why he would do this?

  Hi KyleMiller,

  ·         How you map the network drive?

  Try to re-mapping the network drive and check if it helps. Follow this link to do this.

  How to connect and disconnect a network drive in Windows XP

• connect a network drive on netowork with 7 & xp?

  I am running Windows XP home sp3 on my laptop and my desktop was win7 there is an external hard drive that I want to be able to access from XP just as easy with 2 PC win7?

  Hi paul3200,

  You can follow the procedure below the link that has the steps of how to connect it and disconnect a network drive in Windows XP: http://support.microsoft.com/kb/308582

  You can also check out the link below: create a shortcut to (map) a network drive:http://windows.microsoft.com/en-US/windows7/Create-a-shortcut-to-map-a-network-drive

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the network drive after trying to change the shared folder.

  I had a 80 GB drive connected to my E3000 for a few years and it worked without problem. I recently turned to a 250 GB Maxtor One Touch drive. When I plugged it, the router automatically creates a shared folder. I was able to connect to this folder without problem, but I wanted to share the whole score. When I made this adjustment and tried to save the settings, I temporarily lost access to the router. He gave me the standard page cannot be error message appears. When I got access changes seem to be made. When I try to access the drive of my laptop I get this error message, "the mapped network drive could be created", "the name specified network is no longer available". I rebooted and power rolled my router as well reconnected the drive.

  I think that since you have replaced your hard drive, old settings are configured may still on the hard drive of old. You can change the users and group so that it syncs with the new hard drive or start from scratch (reformat the hard drive).