Similar Questions

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: No mapping between account and the security of ID names was done when trying to setup of Dragon NaturallySpeaking 10.

  Original title: no mapping between account and the security of ID names was done.

  I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.

  Hi Hasky620,

  I recommend you contact the support of Dragon NaturallySpeaking for assistance:

  http://www.nuance.com/support/index.htm

• Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Why are the creative Cloud system and the system of Support of Adobe gawdawful so dear and so ugly?

  Free market at work in a gullible or irrational population.

• work around the internal security gateway and the same url for web access external and internal

  role of the broker 1 quest
  1 security with the roles of web access gateway
  1 Server terminal server

  I configured the default gateway with the parameter security rule: "vworkspace security gateway".
  I created a custom with the 172.16.1.177 value rule (it's my client internal windows7).
  When I navigate to the internal url (fqdn's secure gateway server) I bypassed (tsdebug shows no sslgateway).

  But now I want to use 1 internal and external URL to type the same URL.
  Now when I navigate to an external URL of the machine internal with above ip I always get through security gateway, I see a SSLGateway

  Hi Erik,

  I think that this has been fixed in our latest version 8.5 - documents.software.dell.com/DOC252107

  Please download and upgrade your farm and let us know if you still see this problem.

  If you do, it may be best to save a service request so that we can see exactly what is happening.

  Thanks, Sam

• Training camp and the security

  I just installed Windows using Boot Camp 10, for the sole purpose of testing the Windows version of an application I'm developing.  I still I have the feeling that it would create a completely separate system, and that neither OS would have access to the partition or files on the other.  So, I was surprised to find a drive icon "BOOTCAMP" on my desktop Mac, giving access to all files on the Windows partition.

  My concerns/questions are as follows:

  1 Windows has access to files on my OS X partition?  I don't want to I don't want Microsoft and others being able to access my folder (like their EULA permits), and in my humble OPINION Windows has a security generally lax, especially with a score of unencripted.

  2 given that OS X can access the Windows partition, there chances that malicious software Windows could end up under OS X?

  My system: early 2015 rMBP; OS X 10.11.3 with FileVault 2 active, Windows 10 with no encriptación.

  Thanks in advance.

  samuelfromaberdeen wrote:

  1 Windows has access to files on my OS X partition?  I don't want to I don't want Microsoft and others being able to access my folder (like their EULA permits), and in my humble OPINION Windows has a security generally lax, especially with a score of unencripted.

  If you have installed the drivers from Boot Camp on Windows (if you have not, you should install them as soon as POSSIBLE), Windows can read your OS X partition, but it can not writeand vice versa. Apple has included a basic HFS + driver in Windows that allows you to access your files from OS X but ensure safety by not letting Windows to write part of the OS X from your hard drive.

  samuelfromaberdeen wrote:

  2 given that OS X can access the Windows partition, there chances that malicious software Windows could end up under OS X?

  As you can see above, Windows cannot write files to your OS X partition, there is no risk of that.

• computer in question being, trying to download the latest update (kb981852) whenever I have download nothing is updated and the security symbol remains (yellow shield of windows).

  Einf is the message I get.  I did what I usually do to download but nothing happens.  I noticed there are 0 download size, so I guess that nothing is there for download anyway.  The windows symbol, I assume that something is wrong.  Please could someone enlighten me.

  Download size: 0 KB 0 minutes (downloaded; ready to install)
  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.  Details...
  Update security for Windows XP (KB981852)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

• CFwindow not working only not with the secure URL

  I use the code

  	< cfajaximport tags = "cfmessagebox, cfform and cfwindow" >
  	< cfwindow bodystyle = "background: white;" font: 12px / normal arial, Helvetica, without serif. "initShow ="true"width ="350"height ="255"name ="connecting"Center ="true"resizable = 'false' draggable ="false"source ="login.htm"/ >

  and it works very well.  The login window is displayed.  However, I want to change it to a secure URL by entering the full URL

  	< cfajaximport tags = "cfmessagebox, cfform and cfwindow" >
  	< cfwindow bodystyle = "background: white;" font: 12px / normal arial, Helvetica, without serif. "" initShow = "true" width = "350" height = "255" name = 'connection' type = 'true' resizable = 'false' draggable = "false" source = " https://MyDomain/login.htm " / > "

  The pop-up cfwindows shows empty.  Why is this?  Any help is appreciated.

  Because who is considered a cross-domain request (although this seems to be the only cross-Protocol, actually an http address resolves to a different virtual host to an https address).  Take a look at this thread StackOverflow to workaround solutions.

  Also, it's probably easier to deal with using * all * other than CFWindow, as Scott suggests.

• wireless network icon has disappeared from the State system and the notification bar

  wireless network icon disappeared from the tray system and notifications (that is to say, it is no longer a wireless icon by the clock where I can see networks, connect to the network, or see the strength of the network).  How to bring back icon?

  See the following article: http://support.microsoft.com/kb/945011.  It should help to solve your problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Operating system and the new hard drive

  I have a question:

  I have a HP a4302f - with stock specifications:

  A computer virus has little or nothing to do with a hard disk crash. Please include the exact error messages and/or screens that remains stuck on the computer.

  A 500 GB hard drive at 7200 RPM SATAII should run around $ 45 to $ 70, and the operating system can range from $ 0 to $ 30 depending on exactly how handle you the situation.

  Is that what you had created your HP recovery disc set staff when you first set up your computer, you would be able to return the computer to a factory State even with a new hard drive. Since it does not appear that you have created these disks, you must buy a set of HP recovery disks or disk installation of operating system with COA and product key. None of these methods should work as expected and you will leave with an operating system on the new hard drive.

  You can order a set of discs of HP recovery directly from HP or third-party ComputerSurgeons.com. Purchase of a full blown Windows OS is not really necessary and you can actually download the Windows operating system to use with the key already on the side of your computer. For a hard drive, look at Frys.com Newegg.com, Amazon.com, etc.

  If you have any other questions, please post them here.

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• ID of Session apex and the Google URL parameters

  I think my question is maybe too obscure to get an answer... but I hope...

  I maintain a site that has links to resources for Oracle Certification tests (documentation, articles, videos, books, etc.):

  http://www.oraclecertificationprep.com/Apex/f?p=OCPSG:main

  The site is (obviously) use Application Express as a backend.  My problem is that even if I have the keys pages/tabs/configured to use the Session ID 0, somehow, not nonzero is creeping in session ID.  I really wouldn't worry except that Google ends up getting URL with zero session id indexed for the Googlebot to go.  The result is that Google gets errors of analysis which he maintains have reported to me.  I have delete - more pop up. I delete those, repetition...

  There is a feature in the page of Google Webmaster tools to set up "Parameters of URL" make Google to know what parts of a URL are temporary and should not be treated as a separate URL entry.  However, there are warnings if you configure the incorrect URL parameters, you will end up by excluding indexing course pages at all.

  So my question is (finally) if someone used Google Webmaster tools to set up the ID of session as parameters, and if so, how they went to do.

  Hello

  I'm not sure that you can configure ignore the id of session on tools for webmasters.

  Try to add the canonical link to your pages with zero session id.

  Official Google Webmaster Central blog: specify your canonical

  Or create application processes always redirect to zero session if the url session id is something else.

  Kind regards

  Jari

• Display the date current system and the time in a form

  Hello experts around the world.
  
  I have this little minor challenge I'm having trouble in the corners.
  
  I have a form and I want to display the date current system and time so when I save the form his record with the date displayed.
  
  I tried sysdate, & sysdate and & sysdate. in the default part with static text with memories of State meetings.
  
  So any help or suggestion would be a great help :)
  
  Thank you

  Hi kevin

  write the script in the HTML header below.

  It will give at once, you can set this variable in the variable text box element.

  or else check the below link in java script

  http://www.McFedries.com/JavaScript/DateTime.asp

  see you soon,
  Shan