system BIOS image is not valid or currupt (252)

Similar Questions

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni

• HP Envy x 360: HP Notebook System BIOS update will not install

  I tried to download and install the BIOS update.  Looks like if it downloads but just turn the gears instead of install. Waiting an hour for completion, but not worked.

  Hello

  Try the following.

  Close HPSA, restart the computer, and then download the update of the Bios from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75141.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Note:  If the update option arises as being 'blocked on this device', you will need to contact HP in this regard.

  Kind regards

  DP - K

• system activation key is not valid

  I had upgraded to windows 10 a few days back, but because of some problems that I returned to windows 7 and now the system says my activation key is invalid.now I "this copy of windows is not genuine" on my homescreen.

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• Equium L40 - Updated Winflash "can not find BIOS Image here"

  I downloaded the latest BIOS update for my laptop. When I extracted the folder and ran the Winflash.exe, it brings me to a window asking me to open the so-called "Fill bios image here." in My Documents. When I click on open, then says Can not find the image of the BIOS: bios C:\Users\Max\Documents\Fill picture here.
  Can anyone help? None of this is mentioned in the guide to update BIOS on the site and I need this update of the BIOS. Thank you!

  Hello

  First of all after you download the update of the BIOS, you will need to decompress.
  In my case, I unzipped the BIOS to the C:\ (System partition)

  Then run the file WinFlash.exe.
  If the BIOS update would not start then try with the file UpdateBIOS.bat

  But note; do not forget that you have downloaded the right version of the BIOS for the right laptop model

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

  The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

  HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

  HP support has no answer!

  April 24, 2013

  Just thought I'd give you the answer to this old problem.

  Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

  must be turned on.  This allows Windows to actuall save parts of the operating system

  Although these parts are involved in the actual backup.

  Shame on the HP technical support for not knowing this.

  In addition, the original tech support suggestion was to call Microsoft.

  With a new HP PC you have no direct support from Microsoft (free).

  It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

  must be enabled in the operating system for these virtual backup features to work.

  {Information}

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• MSIMN.exe.image is not a valid windows image

  I think I have a virus problem or a worm.  Whenever I start the computer, everything fine until I try to enter my password to connect.  I get a popup with: a big red X in the upper corner and a message similar to "the application of the dll c:\windows\system32\futunide.dll is not a valid windows image.  I can click ok and it goes away but comes right off.  It will disappear after a few clicks, and then when I sign and try to go to another program he keeps send me windows pop up but with carrying messages, like "MSIMN.exe.image is not a valid windows image file.  "or" firefox.exe.image is not a valid windows image file.  I ca keep closing popups and eventually get on the internet.  Once on the internet popups leave while I am browsing.  I don't know if this is due to the blocking of popup windows or not.  I tried to restore the computer to an earlier date, but he has failed everytime I tried, with the message "restore was not complete, your computer could not be restored to the 01/11/2011", or whatever the date, I tried.  I tried to find these popups and error messages nothing helps.  I use free avg as an antivirus and it cand find any infection when I do a scan.  I have malwarebytes on my computer, but when I run it, I can't update the last definition file.  I t gives me an error.  When I run it as it is that there is no infection.  Also, I googled the 'futunide.dll' nothing works.

  If anyone knows or suspects the proplem is I'd really appreciate the help.

  Thank you.

  Jim Humphreys

  E-mail address is removed from the privacy *.

  Thank you L_C_S:

  Thanks for the quick reply, I appreciate it.

  I got it.  First I did a complete scan for malware and remove a Trojan horse. Upon restart, the popup is back.  I found the futunide.dll in msconfig/startup and in the system32 folder.  I could not find any link to anythimg for this dll.  I have internet google and several windows windows including etc. forums support and could not even get an identification or even a success on it.  I have renamed in the system32 folder and disabled in the commissioning.  I have not rebooted the machine and 'Wala' no popup more and everything seems to work perfectly.

  Still, I would like to know the origin of the futunide.dll, and therefore totally unknown I can't finde out.

  JimH

• C:\windows\system32\devapi20.dll a windows image not valid

  This error message is displayed at startup. I have to click over there several times before the system loads images and programs. When I try to open the program this error shows once again.

  Can anyone help?

  Thank you

  Mae

  Hello
   
   
  Method 1.
  Some mistakes of devapi20.dll could be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the error of devapi20.dll you see is related to a hostile program who is posing as the file.
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
  I recommend you to install the free security software from Microsoft. Which is easy to install and automatically updated
  Here is the link to download.
  http://www.Microsoft.com/securepc
  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
   
  Reinstall the program that uses the wininet.dll file. If the wininet.dll DLL error occurs when you use a particular program, reinstall the program should replace the file.
  You can also try re-installing video, network and sound card drivers.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Can you please send me the serial number, you have a private message ?

• "Could not complete the command image size because that file name is not valid"

  Hello

  Please help me, when I try to resize the file psd his watch this message... .whats the matter?

  "Could not complete the command image size because that file name is not valid"

  Thank you!

  I had the same problem with you and tried to look around, but I solved it myself. One or two layers created by the insertion of your library which have been uploaded to the server cloud.

  When you open the file, you can see the warning as "recreate a link... blah blah your file" If reject you the message, you can still work on it, but you cannot resize, or drag all layers to other new file (tried).

  Everything you need that discovering the layers that are related to the server delegating and delete it. FACT.

• Login to view server license key is not valid. Please contact the system administrator

  About 6 weeks ago, I installed a server connection view assessment. The installation went well.

  Then I needed to divert my attention to another project. Now that I'm back I lost track of the server.

  I built a new W2003 server to use as the display of connection to the server and installed VMware-viewconnectionserver - 3.1.1 - 175957.

  The installation went well. When I try to connect the first time with the help of the

  after URL: https://& lt; server_name & gt; /, introduced by the following

  Message:

  'Display connection Server License key is not valid. Please contact the system administrator. »

  I now have a valid license to apply, but don't know how to hit the administration

  screen. So, you can see the catch-22.

  There is an additional path should I use in the URL?

  Thanks,-Jeff

  Add/admin at the end of the URL path.

• Envy x 360 laptop: HP Notebook System Bios update system (Intel processors) could not be updated

  I get an error of update failed trying to imstall the next update:

  HP Notebook System Bios update system (Intel processors) Impossible to update

  Is there a way to properly update this? What is a critical update?

  Thank you

  Anthony

  Hi @WildFan,

  Thanks for getting back to me.

  Yes, I can give you links to the downloads.

  Updated HP Notebook System BIOS (Intel processors)

  Driver and Intel Chipset Installation utility

  Hope that help.