System deactivates the Multicam editing window

Similar Questions

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  Updated the operating system on the server for Windows 2012. Now I can not connect to vcenter.

  What version of vCenter Server do you run? Only of vCenter Server 5.0 Update 2 is currently supported on Windows 2012.

  André

• change the model fades into the track edit window

  Let me repost with corrected language

  I opened to the top of track editing window for a track of the model. (audio) I can see in the editing window track fades, but when I try to edit them in any way it does not work.  Logic does strange things at this stage. For example when trying to remove a fade, it deleted all the fades in the editing window track, but they still showed in the way of the model. I can edit the fades on the trail of the comp itself but even if I use the gradient tool, I can not change, delete, fade in the window track editingetc.  It is with the button change the runway model turned on and off.  I hate to say this again, but I watched a video online where the fades were easily edited inside the editing window track, but I have tried everything I can think... any ideas?

  I finally understand what you mean and I do not know the answer and look like a bug. I asked this question on another forum to see if others know why this is happening. Very strange...

  I made a sample video and will provide to Apple if verified as does not not as expected.

  Thank you for your patience to explain this...

  Look at the fading in the arrange window as I "try" edit the fades in the track editor. After selecting the header, you should see all the (colorized) model in the editor of track (not if you select the region, but if you select the header) - and you do not have...  Hmmmmmmm...

  

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Batman Arkham City Game of The Year Edition Windows Live Sign in will not be displayed

  So I recently had the game of the year Edition of Batman Arkham City and it installs and works perfectly except the sign GFWL to does not appear so I can't save my game, I've tried a whole series of things to try to make it work, including

  Reconstruction of my Win7 PC
  Uninstall all products direct windows and re install again
  Disabling and re enabling the sign in assistant in services
  run the game in compatibility and as administrator mode
  put a XLIV dll in the folder of the game.
  and re install the game / games for windows live software.

  I do not understand because the following games that I work very well with GFWL

  Dirt3
  Fable3
  Arkham asylum
  and Halo 2
  How can I fix it so I can save my game?

  If the game does not save at all, not even an automatic backup, it may be better to ask a
  Forum Batman-AC.

  "restart the game until I can continue from where I was."

  Only if you stop smoking to the economy (check) point where recording is done.
  There is an icon of spinning when AutoSave is to save something.
  If you wander over the city off the coast of the mission and search for tag or solve riddles of the Riddler
  for example, then auto backup runs just after you tag / solve the puzzle.
  However, also the recording of objectives and achievements he saves checkpoint, where that enter or exit a building for example and they are where you will be re-spawn when you re - load.

  .

• Error - missing operating system after the upgrade to Windows XP Professional from Windows XP Home Edition.

  Original title: lack of an operating system.

  I have a Dell which had windows xp home installed on it I upgraded a while back to pro, the problem is the operating system that you are completely crushed and all I have is a cd to upgrade so it won't let me install because it said that missing operating systems... so what can I do that won't cost me a thing!

  Hi mistyblu976,

  This problem may occur if one or more of the following conditions are met:

  (a) basic input/output system (BIOS) does not detect the hard drive.

  (b) the hard disk is damaged.

  (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  You can follow this link & check if it helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System on the A31p with windows XP Recovery

  Hello!

  I'm using a thinkpad a31p with windows XP. Currently I have no recovery option on my laptop (F11 is enabled in the bios but not displayed at startup). The reason is that I deleted the recovery partition and my own version of Windows XP installed.

  Is it possible for me to reactivate the system restore on my laptop? And another thing: I've lost my restore CD.

  Thank you very much for your help!

  Uros

  You can call Lenovo in Slovenia to see that if they will sell you a set... they have not, since the machine is probably out of warranty, but I would give it a shot.

  That breaks down, the next stop is eBay...

  As last resource, send me a PM if all else fails.

  Good luck.

• Structure of the event edit window

  I'm using LabVIEW 2013. When I place a structure of the event on the BD and right clikc and 'Add event box' or "Edit events managed by this case" edit events window appears.  An animation happens as it widened, but the window is not the case to be seen.  If I try to click anywhere else in labview that my computer issues a beep comes to me as the window is open and I'm clicking outside of it. If I press Esc, I can return to my BD and continue as usual. Unfortunately, I can't edit my events.  Any ideas? Y at - it an option that I may have changed which is making this happen?

  Thanks for any help

  Jesse Zamora

  PS Ce that happens in a VI I started this morning and it also happens in a new VI.

  Close LabVIEW

  Look in LabVIEW.ini for "EditEventsDlgSize ="

  remove the line.

  You should have a lot of joy.  (This seems to be a known issue)

• HP Pavilion Slimline s5212y: my camera to DVD A DH16AAL ATA s5212y Pavilion not recognized in the system after the installation of Windows 10.

  After you have installed the free version of Microsoft Windows 10, I realized that my DVD was neither effective nor recognized in Device Manager. Try as I may to address the support of hp in any problems and try to find updates or fixes to the problem, I have since restored my OS to the older operating system to Windows 7.

  I would like to know if there is a simple patch patch out there in the community that would allow my DVD-ROM to 'see' if I chose to upgrade to Windows 10?

  If there is a "patch" of sorts, I need to have the new operating system installed first?

  Hello:

  The only suggestion I can offer if you haven't tried these, would be to perform the steps listed in each step resolution 3 or 5 from the link below.   Try them both.

  https://support.Microsoft.com/en-us/KB/314060

• Restore files and settings from my old Windows XP system to the newly installed Windows XP SP2.

  My old Windows XP no longer works correctly - it would start to Windows, but that restart. Otherwise, all data and system files on the hard disk are completely legible [no error reported by various scans].

  I made a copy of that old hard drive [with the problematic Windows XP] on a partition of my drive hard [second] another [using EASEUS Partition Master to copy the whole thing - it created an image of all the old hard disk on a special partition of the second hard disk].

  That I took a third hard drive and installed a new Windows XP [SP2] on it. How can I transfer my files and settings from this partition of the second hard disk [which is the image of the original hard drive] third hard disk [which I now use as the bootable hard disk instead of the original one]?

  Can I use "Files and Settings Transfer Wizard" for whom? If so, how?

  AVI,
  I think it's a little late for the transfer Assistant.  You should use it while the other drive has been started.  But you can try the wizard.
  Run it and tell him that you are on the new PC.
  So say no to create a wizard disk.
  Then on the location of the files screen, select other and see if it will let you access the info on your another drive.
  In my view, it will look for the file in the wizard, but it is worth it.

  If this does not work then you need to just reinstall your programs and manually copy the data to your new drive. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• Move the system to the same drive Windows 7 Partition

  Due to a quirk of the material on this laptop, I was required to pay a small partition bootable (30 G) to copy the Windows installation media.  This partition, I was able to install windows on a partition on the rest of the disc.  This left me with a system dual boot that can start on the partition of media installation or to my installation of Windows 7.

  Now that Windows is correctly installed, I would delete the partition of 30G that contains the installation media and to increase the size of the main to include partition now the entire disk.

  I MiniTool Partition Wizard that will allow me to perform these tasks, but he warned me that the media installation partition is the system partition and removing it can make my system unbootable.

  My layout of disk management is:

  Disk 0 (basic 476GB): Partition 1 (unnamed) 29.30 GB NTFS; Healthy (System, Active, primary Partition): Partition 2 C: 447,64 GB NTFS; Healthy (start, page file, crash dump, primary Partition)

  I removed the entry from the bootloader, so now I boot directly to my installation of Windows 7 without the dual boot menu asking which partition to boot from and it worked correctly, but I worry about the right way to do the 2nd partition, the system partition, delete partition 1 and push the 2nd partition in this space now unused.

  First move the Bootmgr on C:

  Download and install EasyBCD (click on Download - no name or Email required).

  (1) select the BCD Backup/repair tab.

  (2) select change startup disk

  3) click on the button in the Action to perform

  

  In the window confirm that c, said the new boot drive, click OK.

  

  Reboot PC, confirm that c is now marked Active Boot System.  You can now delete the old partition system, the annex of his space in C using Partition Wizard resize Partition - video help.  Use the bootable CD that is safer and never lack, so that all others, including the PW Windows application may fail.  So, back to the top of your data and a system of image first.

• Video lag in the preview/editing window - HD images

  System Specs:

  Windows 7 64 bit

  Intel Xeon W3565 @ 3.2 GHz

  12 GB OF RAM

  Graphics NVIDIA Quadro 4000 card

  1 TB 7200 RPM HDD (OS)

  2 TB 7200 RPM HARD drive (where my HD video clips are saved)

  2 TB 7200 RPM HARD drive (disk Scratch Files)

  Camera: Canon XHA1 (HDV 1080i)

  HD video clips were the .mov file formats came because I used to work on a Mac pro (now on the PC listed above), but first would not, so I converted the files to .mp4 with compressor on the old Mac pro. (Maybe that's the problem? I do not know)

  Whenever I have try and get a glimpse of one of the video clips in the Editor pane, it will play perfectly for 2-3 seconds, but then it starts lagging and is virtually impossible to set in/out points.

  I tried to set my resolution of reading Full, 1/2 and 1/4 and none of them seems to do the trick.

  Here are my settings in sequence:

  http://i.imgur.com/uc3Qt.jpg

  http://i.imgur.com/yZHpb.jpg

  Is there something I missed or whatever it is, that you can suggest?

  Thank you

  I sent the support team calibrated XD decoder and they fixed my problem. For others with this problem, here is the email they sent me explaining in detail the problem + solution:

  Hello

  Thanks for the info and sorry for the problem - we'll put a note about it in our support site but:

  Basically, calibrated {Q} XD decode for WIndows is a codec QuickTime decoding to video that decodes XDCAM HD / EX or HDV QuickTime-hands video frames but calibrated {Q} XD decode do not analyze the MOV file or read the images on the hard drive.

  The problem is the new QuickTime Player 7.7 - for some reason some of the HDV MOV files (not all) that have been created/generated by builders of different hardware/software like FireStorm (or similar) the new QT 7.7 reader generates a bad Atom public error when you try to open/analyze HDV MOV file. Supposedly, we have heard that Apple is aware of the issue and said that it would be addressed in a future release (but not here Apple us)-you can communicate with a FireStore to see if they have more information to update from Apple.

  So the only option is to get down to QuickTime Player 7.6.9 (or earlier version of 7.6) and then this should allow QuickTime Player 7.6 (and conversely Premiere Pro) open the HDV MOV files that have been generated by the FS unit and calibrated {Q} XD decode for Windows would decode the video images which would be handed over to her by QuickTime.

  Once again - sorry for all the problems and let me know if you have any questions!

  See you soon,.
  Calibrated software team

  And here is a link to the old version of quicktime for those in need:

  http://www.oldapps.com/quicktime_player.php?old_quicktime=30

• Evolution of the values displayed in the report and the form editing window

  Hello experts,
  
  I need some advice...
  
  I have a simple little application that shows a table (report and form).
  Now my table has values where I can edit these values.
  
  What I do is when I click on icon small change, I need to change the existing automatically without the user to manually change them.
  
  How can I do it please?
  
  Thank you
  
  Published by: Kevin CK on March 19, 2010 12:23 AM

  You can do this with a process Page or javascript. Depends on your specific needs.

• Do I need to get all updates to windows on the new VISTA system before moving on to Windows 7?

   Hi , I have a brand new 'Pavilion Elite m9300t PC with TV/PVR' always in the zone since the 2008-09-02 (don't ask why, long story). There "Genuine Windows Vista Home Premium (64 bit)" on it.  I bought a software "Windows 7 Home Premium Upgrade designed for Windows Vista" (box).  It seems clear that the system accepts the 64-bit Windows Update 7

  
  

  My question is, when I turn firstly on this machine, I have to spend hours updating the Vista operating system with all the Windows updates until I put in the Windows 7 Upgrade?  Or can I just simply immediately install Windows 7 Premium on the new brand new OS Vista from HP?

  
  

  I ask because I don't want to spend hours in Vista with Windows Update updates when I have not, before using Windows 7 Upgrade disks.

  
  

  Any help would be greatly appreciated.

  
  

  TIA,-Paul
  

  Hello:

  No, you don't have to do anything other than the upgrade to Vista.  If you are brave, you are better off getting a clean install and wiping out Vista anyway.  If not simply put in the drive of W7, let an automatic upgrade on place and you're ready to go. You will have enough updates W7 to treat once the PC is upgraded to W7.

  Paul