Video lag in the preview/editing window - HD images
System Specs:
Windows 7 64 bit
Intel Xeon W3565 @ 3.2 GHz
12 GB OF RAM
Graphics NVIDIA Quadro 4000 card
1 TB 7200 RPM HDD (OS)
2 TB 7200 RPM HARD drive (where my HD video clips are saved)
2 TB 7200 RPM HARD drive (disk Scratch Files)
Camera: Canon XHA1 (HDV 1080i)
HD video clips were the .mov file formats came because I used to work on a Mac pro (now on the PC listed above), but first would not, so I converted the files to .mp4 with compressor on the old Mac pro. (Maybe that's the problem? I do not know)
Whenever I have try and get a glimpse of one of the video clips in the Editor pane, it will play perfectly for 2-3 seconds, but then it starts lagging and is virtually impossible to set in/out points.
I tried to set my resolution of reading Full, 1/2 and 1/4 and none of them seems to do the trick.
Here are my settings in sequence:
Is there something I missed or whatever it is, that you can suggest?
Thank you
I sent the support team calibrated XD decoder and they fixed my problem. For others with this problem, here is the email they sent me explaining in detail the problem + solution:
Hello
Thanks for the info and sorry for the problem - we'll put a note about it in our support site but:
Basically, calibrated {Q} XD decode for WIndows is a codec QuickTime decoding to video that decodes XDCAM HD / EX or HDV QuickTime-hands video frames but calibrated {Q} XD decode do not analyze the MOV file or read the images on the hard drive.
The problem is the new QuickTime Player 7.7 - for some reason some of the HDV MOV files (not all) that have been created/generated by builders of different hardware/software like FireStorm (or similar) the new QT 7.7 reader generates a bad Atom public error when you try to open/analyze HDV MOV file. Supposedly, we have heard that Apple is aware of the issue and said that it would be addressed in a future release (but not here Apple us)-you can communicate with a FireStore to see if they have more information to update from Apple.
So the only option is to get down to QuickTime Player 7.6.9 (or earlier version of 7.6) and then this should allow QuickTime Player 7.6 (and conversely Premiere Pro) open the HDV MOV files that have been generated by the FS unit and calibrated {Q} XD decode for Windows would decode the video images which would be handed over to her by QuickTime.
Once again - sorry for all the problems and let me know if you have any questions!
See you soon,.
Calibrated software team
And here is a link to the old version of quicktime for those in need:
http://www.oldapps.com/quicktime_player.php?old_quicktime=30
Tags: Premiere
Similar Questions
-
How can I transfer video files to the library in windows media player for an external hard drive
How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.
You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive. If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.
-
Whenever I open a Windows Explorer window, the preview window to adapt is questionable. It is anchored on the right side of the window. Sometimes it's fine, other times, it covers more important data like date/time and file size. If I have it full screen on my wide screen, everything is great, but when I throw it in my smaller screen, everything must shrink. Rather than shrink the preview pane, it allows the preview pane cover the most important areas.
The width of the preview in Windows Explorer screen can be hung on the left side instead of the right side?
I don't think it can be docked to the left. I know that the sector details can twisted to put it on the bottom rather than the side (like Vista/7), but the preview pane itself isn't such a tweak.
-
Video playback in the preview screen appears like a mess in staircase
Video playback in the preview monitor appears as a mess in staircase. The audio plays perfectly. I use Premiere Pro CS4 4.2.1 only DV NTSC. I checked all my settings, found nothing will fix it. This could be the cause of this problem?
I'd be inclined to say that you have a problem with the graphics driver.
-
Prior to the release and the Mirage 5.0 upgrade, I had a CVD of reference created. I did 5 revisions to the Base layer on the MCV Ref. After each change, I clic click straight on Mirage Client icon, select Tools and then run "Installation of Image of Windows 7. Then I go back to the Console and capture a layer of existing base of CVD Ref. has worked like a charm.
Since the upgrade to Mirage 5.0 and after the installation of the new client on the MCV Ref, the installation of Windows 7 Image tool is missing. If I try to capture the base in any case layer, it crashes. I checked the logs and he returns with "Execution dock could not be completed" and never captures the base layer.
I have uninstalled/reinstalled the client on the MCV Ref.
I have removed the Ref CVD of inventory and created again.
Still cannot capture the base layer.
The next thing im going to do is flatten the CVD Ref and available with a base previous output layer and see what happens.
BTW, this happens on two Ref CVD I created. for example a team lead Ref CVD and another is a Call Center Ref CVD.
any ideas?
The only way I could get my MCV reference existing (before Mirage 5.0 upgrade), to capture a Base Layer (after changing new) without having to rebuild my reference Image from zero has been to Sysprep the machine and capture with WDS. I removed the Mirage customer before sysprepping. Then deleted the CVD the stock updated Ref waiting and then I rejected the device pending and removed from CVDs rejected.
Then was to bring the return of WDS Sysprep image and install the Mirage Client and create a new MCV Ref. I made a few changes and was able to capture the base instantly layer. I will now do the same for the rest of my pre Mirage 5.0 Ref CVDs. I had 3 Ref CVD anyway. If they were not complex images, I would of just them rebuilt from scratch.
I'm happy to finish with WDS, so much easier to make changes to the images on Mirage.
Hope this helps someone else with the same number of "Execution of Shim failed to Complete" when revisions to images on Ref CVD after the upgrade to the Mirage Server 5.0
-
After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie. All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes. Is it possible to move these clips to which they belong without having to recreate the whole project?
What happens if you try to read the project in Movie Maker?
Looks like your project .mswmm file is corrupt (starting
Perhaps more than the best approach). The project can be as far
too big and too complex to publish (save) with success as a
video file.I suggest that you create several small projects
and publish (save), each of them in the. WMV video format
and then re-import the collection. To combine WMV files
in a single movie.You can also import collection. Clips WMV to DVD
Manufacturer and each clip, would have become a scene (chapter)
on the DVD.The following article is maybe worth a visit:
Movie Maker - how to divide a project complex smaller?
http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm -
Why my video work in the preview WMM, but don't not after publication?
The video plays smoothly in the preview, but when I publish it the video stops at a section in half way through and freezes and goes on like this for the rest of the duration of the video.
I tried to publish different ways and re-issue of my video, but it continues to be...
Hello
This can happen if you try to publish a movie after one or several source files for the corresponding clips in your project have been moved, renamed, or deleted.
To resolve this problem, do one or more of the following:
a. Locate the original source file, and move or copy them into the directory on your computer when it was first imported into Windows Movie Maker. To find a missing file, click on the missing element in the collection or project pane, click on edit and then click on search for a missing file.
b. check that all network locations are still available if the source file was originally located on a shared network location when it was first imported into Windows Movie Maker.
Check this link for more information:
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
-
change the model fades into the track edit window
Let me repost with corrected language
I opened to the top of track editing window for a track of the model. (audio) I can see in the editing window track fades, but when I try to edit them in any way it does not work. Logic does strange things at this stage. For example when trying to remove a fade, it deleted all the fades in the editing window track, but they still showed in the way of the model. I can edit the fades on the trail of the comp itself but even if I use the gradient tool, I can not change, delete, fade in the window track editingetc. It is with the button change the runway model turned on and off. I hate to say this again, but I watched a video online where the fades were easily edited inside the editing window track, but I have tried everything I can think... any ideas?
I finally understand what you mean and I do not know the answer and look like a bug. I asked this question on another forum to see if others know why this is happening. Very strange...
I made a sample video and will provide to Apple if verified as does not not as expected.
Thank you for your patience to explain this...
Look at the fading in the arrange window as I "try" edit the fades in the track editor. After selecting the header, you should see all the (colorized) model in the editor of track (not if you select the region, but if you select the header) - and you do not have... Hmmmmmmm...
-
I loaded the preview of Windows 8 developer, how can I do a clean install of Windows 7?
I was stupid and has not implemented a partition on my HARD drive. I have to do a clean install of Windows 7, which is not too painful because my computer is new. But I can't seem to start from the disc. I changed the order in my BIOS but windows 8 charge even without even giving me a startup disk option.
Hello JordanLeavitt
Do not try to boot from the Windows 7 support. Instead of starting the Windows Developer Preview and then put in the disc of Windows 7. Run the Windows 7 Setup program and follow the installation process of Windows. I would like to know if it works for you. Thank you.
EDIT: You end up with a Window.old folder on your C: drive. It's the Windows Developer Preview. You can delete this folder.
-
Batman Arkham City Game of The Year Edition Windows Live Sign in will not be displayed
So I recently had the game of the year Edition of Batman Arkham City and it installs and works perfectly except the sign GFWL to does not appear so I can't save my game, I've tried a whole series of things to try to make it work, including
Reconstruction of my Win7 PC
Uninstall all products direct windows and re install again
Disabling and re enabling the sign in assistant in services
run the game in compatibility and as administrator mode
put a XLIV dll in the folder of the game.
and re install the game / games for windows live software.I do not understand because the following games that I work very well with GFWL
Dirt3
Fable3
Arkham asylum
and Halo 2
How can I fix it so I can save my game?If the game does not save at all, not even an automatic backup, it may be better to ask a
Forum Batman-AC."restart the game until I can continue from where I was."
Only if you stop smoking to the economy (check) point where recording is done.
There is an icon of spinning when AutoSave is to save something.
If you wander over the city off the coast of the mission and search for tag or solve riddles of the Riddler
for example, then auto backup runs just after you tag / solve the puzzle.
However, also the recording of objectives and achievements he saves checkpoint, where that enter or exit a building for example and they are where you will be re-spawn when you re - load..
-
How can I configure via Bluebeam PDF to preview in the preview of Windows 8 pane?
In windows 7, you can set the Preview file tree pane to preview a PDF file when you click on it once.
In windows 8, this does not work, even when you set the view organize in the preview pane and the player to the default player.
All solutions?
Bluebeam using for PDF files.
Thank you very much!
Thank you!
Your questions:
Thanks for posting the request in Microsoft Community Forums.
1. you have to any other PDF Reader installed on your computer such as Adobe Reader?
> The group uses BlueBeam, although if there is no solution to BlueBeam on Windows 8, I'll ask if Adobe Acrobat Reader is a viable alternative
2 are you able to view the icon on the right side on the preview pane?
> The file icon is there with the image of default BlueBeam on all PDF files. No image of the file as an icon is visible.
3 do you have. what Bluebeam version installed?
> Xtreme Bluebeam
4 is this problem specific to Bluebeam? Are you able to work with other programs to drive?
> Look into it and report back.
I suggest you to check if you are using the latest version of Bluebeam on the computer.
> Yes, the latest version of BlueBeam Xtreme is installed.
You can try the multiple steps that are proposed in the article provided here.
http://communities.Bluebeam.com/showthread.php?73-thumbnail-preview
I also suggest to display the query in Bluebeam forums for more support information.
http://communities.Bluebeam.com/
> :) Have done in the same time, I posted this Q here! (Don't know if the question was one for Windows 8 or BlueBeam, so I tried to cover my bases... :)))
Hope this information helps.
> Thank you!
I'll look in the above resource links and post an update. It would be swell if you check also come back here as if I find something relevant and I have an another Q I would love your comments!
Thank you very much!
-
System deactivates the Multicam editing window
I use 2015CC from first on a very robust machine (PC). I have problems with the program monitor entering several camera on its own mode when there is NO multi-cames clips or sequences in the timeline panel. So I can't get out of multi-Cam mode and have quit the program. When he goes in this induced auto mode Multli-Cam, I can move the pointer of the chronology and the line, but nothing rubs and nothing will play. I tried the mouse, JKL keys. Nothing works until you exit the program and reload.
What could I do to access the mode multi-Cam inadvertently?
Major Breakthru *.
After a ton of experimentation, I found (in fact one of my other publishers insisted on the removal of the audio track that led to the discovery of other) narration of the zero track that had been planned by a previous editor had the Enhancer Plugin applied votes. I have it clear the zero track (all the clips of 79) and viola... no apparent hanging plus. Don't know how all this interacts, but indeed that's the trigger. Somehow the voice Enhancer Plugin interacts with the window Trim (which apparently always comes up when you cut an editing tool now) and prevents to immediately close and return to the regular monitor window.
I would like to know how the hell this happens, but for now I'm just happy to be able to edit again.
-
The preview of a selected image no longer appears in the window open the file
I have CS2 in the Windows and Mac versions. For the most part, I use the Mac version. On this one the preview of the selected image no longer appears on the window open the file. He appeared, but recently ceased to appear. This makes the image to open much more difficult. How can I get the preview back?
No thumbnail appears in the open dialog box or the thumbnail is black?
Is this with any file or only those registered lately?
Are your windows system files?
In the open dialog box you have to display thumbnails?
If you have recently registered their CS2 mac, you have Macintosh thumbnail checked in file management preferences?
You use the open dialog box standard or the Version Cue one?
-
Unable to create the new project Windows Digital Image in 2006.
Original title: Digital Image 2006 Windows?
My operating system is Windows XP SP3. I have installed Windows Digital Image 2006 but when I clicked on "create a new project" he has opened with a page containing a red X, calendar, frog and a butterfly, and I was unable to go further. It is a good editing software, but I would like to be able to use all the facilities.
If someone familiar with this program, please indicate what could be the problem and how I might be able to correct even.
Thank you.
Look at the link here because it says Microsoft Digital Image 2006 is not compatible with Windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Windows%20Digital%20Image%202006If the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf compatibility is not successful, then try and run the program compatibility problems:
If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.
If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.
Thank you
Marilyn
-
Failure of the system for Windows 8 image backup
I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.
The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.
"There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
The mounted backup volume is inaccessible. Try the operation again. (0X8078004F).""There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
The specified drive is not found. (0 X 80780081)"Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.
7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MBAnyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.
Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.
Maybe you are looking for
-
where the voice has entered mobile firefox?
I use a Samsung Galaxy Tab 2 7.0 and have downloaded Firefox for Android and it seems to work very well, but I noticed that when I press the address bar I don't get the opportunity to talk about the entry instead of typing in. Entered voice not suppo
-
My Skype crashes whenever I'm doing first call/reception of the first call
My Skype crashes whenever I do the first call or receive the first call. Whether by Skype phone or Skype to Skype. I have to sign out of Skype and then reconnect you for each call.
-
Boolean personalized crosses on valves
Hello I would build two Boolean, for 6 or 4-way cross valve (shown in the attached picture). I tried to pull the two States of Boolean in the powerpoint then tried to import via the Clipboard in a custom of the ring/boolean control. Her resut is not
-
Change the title: internet connection. Unable to connect to the internet, suddenly, message that I can't connect to the internet using HTTP< or="" ftp.="" thios="" is="" probably="" caused="" by="" firewall="" settings="" on="" your="" computer.="" c
-
Windows Desktop, open, IE8 reverse flash colors at the opening of new window or program
Just got a new Dell OptiPlex 780 desktop running Windows7 two days ago. Everything works fine except for this really boring 'flash' each time I open a new program, open new windows (but not all the time that I opened a window) and whenever I go to a