Similar Questions

• Tecra 8100 system error when using Bank B

  Hello

  I get Bluscreens and system errors when you use Bank B. When you use Module1 in the Bank, everything is ok. When the same module as Bank A Bank (Bank A + B) b, I get errors.

  So, what would it be? What I have to 'turn on' the use of BANK B anywhere or not it looks like its defekt?

  Thanks for any help

  Hello

  Well, you must replace the motherboard if the memory bank has a defect. In this case, the only good way to connect with the service partner. They might give you detailed information.

  Good bye

• How to remove system error memory image files using vista

  When I use the disk clean under performance of the computer, it will not clean the system error memory dump files

  If you go to C:\Windows\Minidump

  What do you see? What happens when you try to delete the files?

  =====================================================

  Maybe your system is configured to save other dmp files - so check the
  definition of here and look in this folder.

  How to configure Windows to create MiniDump on BSOD files
  http://blog.NirSoft.NET/2010/07/27/how-to-configure-Windows-to-create-minidump-files-on-BSOD/

  Regardless of their location, you must be logged in as an ADMINISTRATOR and
  have sufficient permissions in the folder they are located there.

  I hope this helps.

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• "High computer use" system error appears frequently.

  "High computer use" system error appears frequently. Minimum of 768 MB of virtual memory and 1149MB max, but using 902 MB. Also when this error occurs I'll check the details and parameters, and it shows that everything is normal. Do I have to change my swap file size, system not indicativ of a virus. I use Verizon 'high speed internet', but it doesn't seem to be high speed for me. I have cleared the system event logs, defragged the hard drive and played all Windows performance tools.

  "High computer use" is not a standard Windows message.  If this is in fact the message you see, you need to determine what application it brings and what it means.

  If this isn't the exact text that you see, please provide the full text of the message, without paraphrasing.

  In general, you should leave the page file setting in the ' System Managed.  Windows does a good job to manage page - better file that these articles "tweak your computer" might suggest.

  

  The speed of your Internet connection will depend on many factors, but you can get an idea of how "fast" your connection is using one of the speed of the tests here-->
  http://www.dslreports.com/stest
  http://www.Speedtest.NET/
  http://my.Verizon.com/services/Speedtest/

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• NET USE error: '67 system error has occurred. The network name cannot be found. »

  Original title: NET USE worked for error.

  OK I used the following with a RDP'ing of XP in a server of S2k3 years:

  NET use lpt2 \\SERVERNAME\printername /persiternt:yes

  now, I get a "system error 67has has occurred. The network name cannot be found. »

  What made me state was I restarted my XP machine.

  What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...

  suggestions?

  Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.

• system error message uninstall lavasoft ad-aware 2008 - the program is using 50% CPU allmost

  someone please help, I am trying to uninstall lavasoft ad-aware 2008 and the next goes to show on the screen, system error has occurred. Description.could not connect to the service, you are running this application as another user. application ends, the program uses allmost 50% CPU please help

  Hello nigelrichardson,

  Check the information of Lavasoft on error 1814.

  http://www.lavasoft.com/mylavasoft/support/FAQs/how-to-resolve-AdAware-2008-high-CPU-issue-or-system-error-1814

  This will help you solve your problem.

  Thank you

  Marilyn

• Impossible to back up only the system in Win 7 SP1 x 64 image (error code 0 x 80780020)

  I am unable to back up only the system in Win 7 SP1 x 64 image (get the error code 0 x 80780020).

  Also I can not create restore manually points, nor is Win 7 automatically create (that is to say, I have zero restore points) of restore points

  Good suggestions informed please?

  concerning

  JED

  I wonder if this is disabled: Microsoft Software Shadow Copy Provider (swprv)

  The Microsoft Software Shadow Copy (swprv) provider creates backups of important system files and settings. When you install the software, install, or update of windows, that a shadow copy is created to wrap something bad happens during the installation.

  Service name: swprv

  • Description: Manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, any services that explicitly depend on will fail to start.
  • Path to the executable file:C:\windows\System32\svchost.exe -k swprv
  • Startup type: Manual

  services.msc

  Microsoft Software Shadow Copy Provider

  This indicates, must be handwritten, but mine is set to auto

• Images of Smartphones blackBerry will not appear on the BB + file system error

  So, I have two problems:

  (1) I went in my 'images' on my Blackberry and there is no picture pictures says * no. *, but when I plugged my BB to my PC and clicked on the pictures folder, I can see all my photos. How is it?

  (2) I can't save a photo on my BB. When I choose 'Save', nothing happens, keeps saying "File system error", sometimes it is said that there is already a file with the same name and when I try to change and choose Save nothing happens.

  Another problem, I just discovered: when I take a picture, I can't delete it later, I get "picture cannot be deleted.

  * I don't have a MicroSD card in my BB.

  Hi and welcome to the Forums!

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• spreadsheet charger error: the type of person of the system shall be used when the type of assignment is E or AND

  Hello

  I am trying to load data through loader of worksheet in Fusion HCM (worker load) but I get this error message

  «Error: the type of person of the system shall be used when the type of assignment is E or AND.»

  Any ideas?

  Thank you

  Soha.

  Solve us it

  2 types of person had used default type punctual person

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error.

  original title: Skyrim .dll error
  When I press play on the Skyrim Launcher button, nothing happens. I tried to open the folder and run the TESV.exe and got an error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor"I run Windows 7 Ultimate, and I've updated all my drivers and directX and uninstalled and reinstalled Skyrim repeatedly. I replaced the DLL in question and also organize sfc/scannow. Nothing seems to work, I tried all of the solutions I found online, nothing helps.

  I really want to start playing this game... huge fan of Elder Scrolls...

  Hi MattHamlyn,

   

  1. did you do with the last changes made to your computer before this show?

  2 you are logged as administrator?

  3 you are installing the game online or using a CD/DVD?

   

  
  

  I suggest you to follow the steps below and check.

   

  Method 1:

  I guess that your operating system is Windows 7 64 bit.

  1. click on the Start button.

  2. Select computers

  3. click on your C: drive

  4 program Files (x 86)

  5 steam
  6 Steamapps

  7 common

  8 Skyrim

  9 TESV
  TESV is the game itself.

   

   

  Method 2: put the computer to boot and check if you can play the game:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

   

  I hope this helps.

  Thank you.

• VM Converter 5.5 general system error has occurred

  Hello

  I have a problem using vm 5.5 converter to convert a physical Windows 2003 SP2 machine in virtual machine. The vm converter is installed on the computer that I want to convert. When I run the conversion I'll get an error a general system error occurred: unknown internal error.

  I tried restarting the server and restart the conversion, but it did not work.

  The log file is attached.

  Hello

  I think the upgrade to R2 is a drastic measure and you should consider the impact before making the decision to do so. I don't recommend it at this point.

  You have multiple system drives that you want to convert? (C:\, D:\, etc.) ? If so, try to convert the C:\ just to see if the converter process works. I don't know what role the server has, but if other drives are just you might plan to the image of the disc or copy of the separate data later (if it works).

  I might suggest if the above does not work, we can clean all the VM converter from your source machine files manually, restart the server and try the process 5.1 new converter itself. (Something could be let go 5.5 installation or now stuck).

  Good luck trying that!

  Ryan