System Exec still running reduced?

Similar Questions

• My MacBook Pro display went dark. System is still running. Any ideas?

  My MacBook Pro display went dark. System is still running. Any ideas?

  Hi Ihabah:

  I found this information. Maybe this will help. http://osxdaily.com/2014/11/22/fix-MacBook-Pro-booting-black-screen/

  Kim

• Using FTPClient on a real time with system Exec.vi

  How can I tell FTPClient.exe address target when I start this executable with system Exec.vi in Labview?  I don't want to reinvent the file FTP utility used by MAX with targets in real time. I want to run this executable to a labview support utility without using MAX to do.

  Is this possible?

  Danny

  Thanks for the info.  Your "bad mood" response "suggests" a response to my question.  However, the full answer to my original question is that it is not possible to use FTPClient.exe outside MAX.  It is therefore not possible to spend in the address target at run time if the FTPClient.exe runs external to MAX.  FileZilla is a good choice - there are also other FTP clients out there, but you pointed out a solid choice.  Thank you.

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Dialog control stamp kills system Exec.vi!

  Hello!

  I have just a really strange behavior in my application. I managed to narrow it down to a much smaller VI, please don't look at the framework, but the real problem, this test of the vi MAIN looks like this because it's a skeleton of an application more great (I had to remove a lot of relevant and confidential parts).

  So. I have a relay for monitoring USB from a 3rd party company that I use in my application via a supplied EXE perfectly. I call this exe in LabVIEW using the Exec.vi system and it works perfectly and watchdog functions as it should. However, I see a strange bug (?): if I run a browser control Time stamp dialog window, it "suspends" somehow the Exec.vi system. If my watchdog command stops setting, open relay, problem!

  I compressed my test application, and I can reproduce this same problem, although I have just called a BREAK to gain control of command line. Note that, in my real application, the control of time stamp is in another, said dynamically (call and forget the method) VI, but I get the same bug!

  Steps to reproduce the bug:

  1. launch my app
  2. observe that the iteration of the loop at the bottom
  3. Click browser control time to bring up the dialog window.
  4. You can see the background loop iteration has stopped (iterations of the loop DAQ)
  5. If you close the dialog box, the background loop continues execution

  What the heck is this?

  How this is possible, why there is "interference" between a completely separate control and a loop of low system Exec.vi?

  Thanks for any suggestions!

  I hide in my real application, as a solution, just the element browser control time stamp...

  LabVIEW is a software component called root loop which is used by different parts of the LV. opening dialogue blocks the loop of the root, which is probably what is blocking the DLL called inside the exec system VI. Probably, you will be able to do as opening a menu and leaving open.

  You can do a search for the term to learn more on this subject, but I don't think it's all you can really do about it.

• After you run the XP Disk Defragmenter, system crashes or runs very slowly

  When I run Disk Defragmenter after its finished to start my computer hangs up and slow real execution.

  Also, some installed start programs acting weird. like taking a lot of time to load up or when I use them that they cling

  or stop responding all together.

  To work the way they are supposed to do, I have to uninstall and then reinstall. Why is this happening?

  I thought that the operation of Disk Defragmenter only deleted of fragmented files that are no longer in use, or not is more necessary.

  So nobody knows what is happening here?

  Thank you.

  Kittycast of Kittyville http://justin.tv/marksr

  I agree with Gerry Cornel, this stemmed not Disk Defragmenter.

  There is nothing wrong with the Disk Defragmenter - it works well for what it was intended: temporary, occasional use. If anything, it gets abused and forced to do jobs he was supposed to never do, like defragmentation huge disks that get heavy use and therefore are strongly defragmented, etc..

  Here is a routine that I've compiled over the years to troubleshoot issues with Disk Defragmenter that proved very useful if you want to continue with this problem:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/

  The gold medal is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Concurrent Mark Sweep is still running

  Hello guys!

  I am trying to understand the behavior of the Garbage Collector in my running JAVA 1.5_U21 JAVA virtual machine.

  After a server restart, only small collections (ParNew) were executed. During this period, the nets were stopped for a short time.

  However, something is triggering of CMS and after that the CMS works always (I understand that CMS can be triggered by old gen p.e., but it should collect several times, not all the time!). Before this trigger CPU consumed by GC is very low, however, when CMS begins to run permanently CPU consumption increases a lot.

  I do not understand why CMS is still running because as you can see in the following JVM runs under the threshold or am I wrong?

  TAS:

  Used: 1.454.824 KB

  Engaged: 2.490.368 KB

  Max: 2.490.368 KB

  Non-TAS:

  Used: 172,401 KB

  Engaged: 227,264 KB

  Max: 229,376 KB

  Old Gen:

  Used: 672,222 KB

  Engaged: 1.572.864 KB

  Max: 1.572.864 KB

  Perm Gen:

  Used: 142,036 KB

  Engaged: 196,608 kb

  Max: 196,608 kb

  Code cache

  Used: 30,487 KB

  Engaged: 30,656 KB

  Max: 32,768 KB

  JVM arguments are the following:

  -Xms2560m-Xmx2560m-Xmn1024m - XX: + UseConcMarkSweepGC - XX: NewSize = 1024 m - XX: MaxNewSize = 1024 m - XX: SurvivorRatio = 6 - XX: TargetSurvivorRatio = 90 - XX: PermSize = 192 m - XX: MaxPermSize = 192 m - XX: + UseParNewGC-Xss1024k...

  
  

  Any idea?

  
  

  Thank you very much
  

  Hello

  You can find some calculations on the number of threads CMS. I don't know how many cpu's your system and what is the number of threads by default CMS. May be you need to set '-XX:ParallelCMSThreads = n "parameter in your settings memory to prevent your cpu use java process.

  On Java, processor and parallel garbage collection sets - c0t0d0s0.org

• When I close thunderbird is still running in the background and always using data?

  I'm with an internet provider that has limited use of data per month. If I close Thunderbird when done using it it is still running in the background and using the data or is it closed here for not to retrieve messages or using the data?

  When you close Thunderbird, it cannot check or retrieve new messages.
  Not sure what you mean with "always running in the background.
  When you close Thunderbird is closed. Period.

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Re: Driver for Toshiba system do not run after instalation

  Toshiba system driver not running after instalation in 64-bit windows 8

  Please post more information. Model of laptop, OS, what you're doing and which driver exactly make trouble.

• Satellite P100-324: the Fans are still running

  Hi to you all,.

  Maybe you can answer me the question.
  Is it normal that my laptop fans are still running. I put the 'silent' settings in the bios and forced the laptop to run always on 1000 MHz, if I only use it for writing
  in Word or reading emails.

  It's really annoying. I don't know what to do.

  Thankz for your help in advance

  Michael

  Hello Michael

  It is nothing unusual that cooling fan runs constantly on low speed. On modern laptops, there is a powerful hardware that needs to be cooled correctly. Especially many different processes are active in the background and CPU is standing under pressure. Not much when you use just the laptop for writing, but obviously enough to increase the temperature of the CPU.

  Try it please set the CPU and cooling to a minimum level method. Also check the Task Manager and end the process, you don't need. Maybe this will help!

• Re: Screen keeps going blank even if Equim M70 is still running

  My screen keeps going blank even if the computer is still running.
  Last night, I managed to make it work again for 20 minutes while it was not plugged in, but as soon as it was plugged it erased.

  Today, even when he was not plugged in after 20 minutes the screen starts to Flash and then deleted again.

  Any help?

  > Today, even when he was not plugged in after 20 minutes the screen starts to Flash and then deleted again

  Hmmm... to me it looks really good mine a bit a hardware problem if the screen starts flashing, then erased.
  Maybe there's something wrong with the screen itself or with the other party as FL inverter.
  FL inverter is responsible for part of the screen backlight control.

  In my opinion, these two parts must be checked!
  But I doubt you can do that without additional aid by the ASP technician and so I recommend to ask a technician for assistance.

  Concerning

• scheduled task shutdown.exe still running after disabling SERVER 2008 R2

  Hello

  A scheduled task still running after people with disabilities (shutdown.exe/s) on my network. We have disabled the task in the Task Manager. and updated computers with gpupdate/force. However, it stops again. How can I make this stop?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Mail could not be started because another instance of it is still running on your computer

  When I start Windows Mail I get this message.

  {Windows Mail could not be started because another instance of it is still running on your computer.} Please log off of Windows, and then restart Windows Mail. If the problem persists, save your work and restart your computer.}

  I'm trying to find the instance that is running, but I can't find anything running. I have to restart my computer to make it work.

  Can someone tell me how to solve this problem?

  You can disable individual startup items in a selective way and eventually found the culprit.  If you have Windows Desktop Search installed, go to control panel | Filtering options and disable indexing WinMail.  Also, if you have a mail gadget in the sidebar, remove this.  Antivirus software can also screw up things, seewww.oehelp.com/OETips.aspx#3
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  Steve thank you very much for your help. I would also like to solve this problem for good, but I don't have the slightest idea what to stop running in my startup that has nothing to do with windows mail.

• Impossible to uninstall kntcr, he said that it is still running

  I'm trying to uninstall kntcr from my computer and it keep saying that he always running.i tried to uninstall it but it doesn't work.

  I went on the right side of the screen and went to the clock icon and uncheck the Start button and load and then returned and click farm.

  and I went into the control panel and went to uninstall programs on my computer and try to uninstall here but let's it's still running.i shut down my computer rebooted, and entire it back up again and try uninstalling again, but still it's still running.i don't know what to do please someone help me.

  Hello

  are you sure you spelled correctly?

  Try this program remove it free tp

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  _______________________________________________________

  Read this information or contact the manufacturer of the program:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/trying-to-uninstall-a-program-but-the-computer/4aadb256-5470-E011-8dfc-68b599b31bf5

  http://www.itibitiphone.com/knctr/FAQ/index.php?title_id=35&