MY HP a1410y won't work after recovery XP HELP

Similar Questions

• Micro does not work after recovery please help

  After a virus in my computer, I did the recovery on my pc my dynamic microphone no longer works but the virus b4 it worked I tried everything to fix it and this is not possible and I just tested the microphone on my friends pc works very well I don't know where is the problem if someone can help im using windows xp...

  Did you try to increase the volume of the microphone you?

  Usually, HP recovery work out any software problem, have you chosen factory installation option?

  If the installation of the factory can solve your problem with the microphone, you may have a hardware problem.

• Not will not be up-to-date and exe. files as well as several other programs won't work after that I removed the Trojan horses today.

  I have two problems that first will not to day and exe. files as well as several other programs will not work after removing six Trojans today. I got the old fake security / you're not protected message led me to run McAfee and anti-malware that I solved the problem. It allowed me to meet Explorer but I tried to open the accessories of the calculator and it will not work, nor will my Rossetta stone. I can open these types of files under other users account on this computer. Help please.

  I suggest that you create a new user account for yourself (save all your files first of all that I hope are not damaged etc.). Then, you delete the old user account (but keep the files). Probably most of the programs have been installed for all users, so it should not be (I hope) a problem.

  Recently had to clean a computer infected with one of these software etc. rogue security and creating a new account (Administrator) so that the user has finished up and transfer its files to the new account. He was lucky. I hope you are too.

  Perhaps others may have other suggestions for you.

  Please make sure that the computer is clean of any infection etc.

  K

• SA30 USB do not work after reinstallation, please help!

  Hi, my SA30 USB does not work after reintalling, I don't have the original CD with the phone because it was a gift from my friend... I couldn't find the driver from the website, please could someone help me?

  I could use the USB mouse, but when I plug the external hard drive, he has no answers, I tried to get some new material, it could not detect it. Any information would be welcome, see you soon.

  When install you an OS other than the OEM OS recovery, you need to install the drivers and tools in a right order!

  This command is on the Tools & Utilities CD in a html file! When you follow these order all material must be detected!

  Also you can go to http://eu.computers.toshiba-europe.com and download the drivers

  Hans Bye

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Printers won´t works after update from HP!

  Hello!

  New here and the Sweden so please forgive me for my bad English ;-)

  My dad has a computer with several different printers attached to it. He did some advertising in his office work, such that it has a big HP printer (111 something), printer of a brother, a Dymo LabelMaker and a C822 OKI color printer. The computer is a HP Pavilion that the guy in the computer shop assembled for him. Works in Windows 7, it is converted to XP because some of our programs require it.

  So, the problem is that last week updated HP (or not, because I think that the green bar stopped in the middle) something on his computer. After that, none of the printers worked!!! I have re-installed the Dymo and managed to do that work again. No problem. Done the same with the brother. Works like a charm. Downloaded the latest firmware for the OKI C822 and tried to print a web page. No problem. But then we opened a document in Microsoft Publisher 2007, which is the program that my father always use, and he has done this for the past two years. The won´t printer print nothing! A large yellow rectangle appears in the lower right corner, saying that "the printer cannot print the document" blah, blah. And the display on the printer even doesn´t the light upwards, it just says: ready to print. Nothing more. Please, help me with a solution... I tried a system restore on the eve of the update of hp, but the computer didn t want to go this way. Anyone... ?

  That s true!

• driver Ricoh SD card reader does not work after recovery/vista

  Hello

  I have toshiba laptop with vista professional.

  I did the recovery on computer

  Once the recovery sd card reader does not work.

  Yes, I did:

  Downloaded latest driver ricoh xd card disk image

  installed

  restarted

  .. .but still does not work

  does anyone have a solution for this?

  Thank you, klemen

  You update your copy of Windows as directed by my last answer?

  I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

  Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

  You can try to install the drivers built into Windows Vista

  1. in the Device Manager, click on your PC
  2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
  3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
  4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
  5. under "Manufacturer", select "Ricoh company.
  6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
  7. the full wizard.

  There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.

• Adobe Captivate won´t work after installation.

  Hi, I recently tried to download the trial version of Adobe Captivate.  I need to learn how to use the software for a new job. I downloaded the installer twice and then prompts, and once the interface has been installed, the programme won´t, as it says installation was not made correctly.  I tried this process twice same results failed. Now I can try again to download the Setup Wizard because it said "access denied." Why won´t the trial version works?

  Hi Lisc46666688,

  I'm sorry for the frustration you have experienced installing a trial of Adobe Captivate. What is your operating system? Some newer versions have been known to cause problems.

  Some General to try troubleshooting steps:

  1. Uninstall Adobe Captivate: Adobe Captivate help | Uninstalling Adobe Captivate.
  2. Run the cleanup tool Adobe CC: use of the Adobe Creative Cloud cleaning tool to resolve installation problems. Captivate isn't a creative cloud app, but the cleaning tool can help clean up the remains of program that may interfere with the installation.
  3. Restart your computer.
  4. Re- Captivate download Adobe Captivate free trial download | Adobe Captivate 9.

  If you try the above and that you're still having problems, please let us know the specific error codes that you receive. If possible, send a screenshot: the specified element could not be found...

  Best,

  Del

• HPE 500y: Wifi does not work after recovery

  I have a Hpe 500y with a card mother n-alvorix, I recently did a clean install and now I have no wifi
  When you try to install the driver of hp a ralink I get an error saying is not minimum required 9996
  I tried to look for the adapter mini by adding a fracture, but it does not find
  I also found what he sow there a 802.11 mini bag PCI
  Research through services, it seems to be there
  What is happening is that something is blocked
  The map shows it as a hp 3090
  He worked before clean install

  I imagined of is it tried to download the driver or do both, but u has failed to get the jury to access if as I sayed fo 30 dollars I can peak ausb wireless as a matter in fact I have a lynsnc but it of for mites Xperia windows try comparability n mode in any case thanks for the reply I'd send u a helping hand to the top , but I can't send you a so thanks cost just outside the way the need n this case

• Qosmio F30 - remote does not work after recovery

  I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

  Hey Kevin,

  You can download all drivers here if you have a European model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Your model is a bit more if you need to find in * Archives *:
  * Archive * > Qosmio > Qosmio F Series > Qosmio F30

  Check this box!

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes

  After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.

  I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.

  Do you have any ideea why this phenomenon happens?
  Thank you!

  Hello

  You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.

  If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
  On the other hand the laptop could shuts down due to hardware problem.
  As mentioned by Luke, the internal HARD disk bad might work too.

  Overheating could be another reason why the laptop is off.
  Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.

  But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc

• Recovery CD will be work after erasing data with killdisk

  Anyone know if the recovery CD will still work if I format using something like killdisk I sell my qosmio g20 and don't want any body to recover all data.

  > Does anyone know if the recovery CD will still work if I have the format using something like killdisk

  Why not the recovery CD also formate the HARD drive so I put t see any reasons why the installation is not working after formatting the HARD drive with killdisk

• (Bible Library 7) program has worked on this PC when I installed it all first, but after a few updtes it won't work

  (Bible Library 7) program has worked on this PC when I installed it all first.  After that a few updates have been installed on around 18/05/12 it has not worked. I uninstalled at least 3 times now and it won't work says incompatible application.  Another thing I did was select run as personal button I think I've done worse. I don't know how to deselect or cancel that. It is to select pack 2 for XP, it does not work. I don't see Windows 7 in the list of compatlble.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  If you are running Windows 7, then you don't benefit from this solution in the list Compatibility Mode as the Mode by default when nothing else is checked.

  What is your program?  If so, take a look around the site for technical assistance.  What's the story with the tab 'Locked' on this site?

  http://www.biblelibrary.com/4.html

  This allows to cancel all the settings you can do on the Compatibility Mode.

  Windows 7 - Compatibility Mode
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html

  Your program works in Mode safe mode, or through the clean boot procedure?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to test with another Windows user?

• I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I could not turn it off on m

  I had a computer stop working (broke) who was running CS3. Now I have a new computer and downloaded Cs3 from my Adobe account online. After you have downloaded and installed, I entered my serial number and it won't work. I couldn't turn it off on my computer due to the fact that it broke down.

  The serial number you have is a Volume License serial number, which works only with the specific volume license Installer. Please visit the Adobe license | Serial numbers | Orders | Accounts.

  I hope this helps.