System on the c: volume

Similar Questions

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• My laptop says "system on the disk volume is damaged," How can I secure my data?

  I have a Dell Inspiron 1720, which I had for about 5 years now. Recently he lights up and after trying to do the Startup Repair, I found that the system on the Disk Volume is damaged. I can't do anything on the command line because he said my laptop needs to restart whenever I get something. Is there a simple way, I save all of the data on the laptop?

  Hello

  You can remove the hard > put in a USB hard drive case > plug it into another computer > attempt to read data from there.

  Or, you can make a disk bootable operating system "Knoppix".

  It is a single block of working operating system on a disk that uses your machine hardware failures (as long as the damage that you have are NOT appeared to the Dell hardware; hardware must always work)

  http://Knoppix.NET/

  See you soon.

• "Found root system on the disk volume is damaged."

  Hi, have a Dell laptop Inspiron 1720 under Vista. Suddenly the screen turned blue, my wife tells me, and she tried to restart. A message passed very quickly, and she was unable to read. When I tried to restart the screen has come to give the option to start in safe mode, guest, with the network and other options, including to start normally. I tried each of the options, and none worked so I am unabe to run chkdisk or system restore because I can not get the prompt. I used my boot drive and ran the repair, not good ran, it ran and said the system should restart, he did, but windows could not load.

  I ran a few other test with the F2 and F12 keys-drive unit as much as I've been able to say all items being passed. I took the vista disc and tried to do a clean installation, the computer wouldn't complete installation, it just hangs on the system configuration. After running another one of the diagnosis he was one of the tests that gave information

  " Root cause found" "" system on the disk volume is damaged".

  What is this and can I replace the hard drive for this problem?

  Thank you

  Hi Michel S

  Changed the BIOS to ATA and was able to download Vista and put in place. When I set the BIOS to SATA boot computer a blue screen that passes if fast, cant read then stops start towards choosing a nail system, to the system recovery of windows screen then the screen of windows recovery and repeated the same thing each time.

• Spyware in the system on the new Volume

  My new machine is online now and so far only been known safe sites.

  To my surprise when I installed my spy software he found a file he considered spyware in one of my file system of the volume (System Restore).

  This file not found in another location on the computer. This brings me to wonder how this can happen.

  Any ideas?

  I sent a copy of the file to the company being analyze at verity, if it is a false positive.

  Thank you

  Is no longer a problem. I hated this machine for the about 3 weeks I've owned it. Has decided to reformat and reinstall all the unwanted.

  All right.

• The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume D: utility.

  However, chkdsk finds no problems, so what happens?

  Checking file system on D:
  The type of the file system is NTFS.
  Volume label is A RAID.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning 9 unused entries index $SII of file 0x9.
  Cleaning 9 unused entries index $SDH of file 0x9.
  Cleaning unused 9 security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  244196000 KB total disk space.
  126454172 KB in 238052 files.
  109736 Ko 22501 index.
  0 KB in bad sectors.
  868124 KB in use by the system.
  65536 KB occupied by the log file.
  116763968 KB available on disk.

  4 096 bytes in each allocation unit.
  61049000 total allocation on the drive units.
  29190992 allocation units available on disk.

  He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.

  If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?).  Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.

  You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event?  Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:

  http://support.Microsoft.com/kb/246026

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Here's how to publish events to the event to display the log files:

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Windows 7 backup skipped image system because one of the critical-volumes backup cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  After using the backup of Windows 7, I get the following error message:

  Backup Windows jumped backup system image because one of the critical volumes cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

  The backup is set to include an image of disk system: RECOVERY, DRIVE (d), OS (c :))

  "RECOVERY, DRIVE (d :))" in car is a partition of 2 GB of the hard drive internal, such as configured by Dell, and it is formatted in FAT32.  I tried to reformat the NTFS volume, but were unsuccessful.  I also looked at a certain way to omit this volume, but have still been in vain.

  Can anyone help?

  Thank you.

  Do not assign a drive letter to the partition recovery/player. Open "Disk Management" and decommissioning (without drive letter) and backup and restore performance.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Toshiba 46TL938G hangs suspended 20 seconds the channel volume or entry

  Hello

  I recently bought a Toshiba 46TL938G. When I turn it on and try to do something the system hangs for about 20 seconds, a large rotating circular icon appears in the upper right of the screen (as if it is make a departure upward and informing me that I have to wait) then everything works fine.

  It's very frustrating because it only seems to happen when you try to do something like change the channel/volume/AV input. For example if I turn on my TV and leave it for 5 minutes, it will sit just idling on the program that is on.
  But the second I try to change the channel/Volume/entry/go in menu it freezes for 20 seconds, then do it of thing and let me go in my life.

  All the world is the experience and knowledge of a fix? The firmware on my TV says it's up-to-date.

  Have you tried to reset the TV?

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Photos does not open on the shared Volume

  Hello

  I have a mini Mac running Mac OS X Server 10.9.5 as our server family with a shared folder "Photos", which contains a folder with our library of Photos (200 + GB).

  This allows me to mount the shared folder and open pictures to access the library (to download photos, etc.) on my MacBook Pro with Mac OS X 10.10.5.

  It worked fine for a while but now I can't open the shared pictures library.

  On the library to open, it says "library could not be opened.  Pictures has attempted to repair the library 'Hatken Photos of but is unable to open it. Open the other... Quit smoking»

  Console error messages are:

  16/01/2016 8:18:19.942 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 3m24s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  16/01/2016 8:18:56.885 pm photolibraryd [14166]: failed to open the library Hatken Photos.photoslibrary error: error Domain = NSPOSIXErrorDomain Code = 22 'invalid argument' UserInfo = 0x7fa7c8407160 {NSURL=file:///Volumes/Photos/Hatken%20Photos.photoslibrary/database/metaSchema. db.lock, NSLocalizedDescription = Invalid argument}

  16/01/2016 8:18:56.913 pm Photos [14285]: error: Domain error Code = com.apple.reddwarf = 18 UserInfo 'RDErrorServiceDatabaseOpenError' = 0x7ff338cb9be0 {NSURL=file:///Volumes/Photos/Hatken%20Photos.photoslibrary/, NSLocalizedDescription = RDErrorServiceDatabaseOpenError, NSUnderlyingError = 0x7ff33a072f70 "invalid argument"} while trying to open the Hatken Photos.photoslibrary

  When I try to manually force a repair (Command + Option) it works for a while (at 1 or 2% of the great library) and then closes saying "an error has occurred while repairing permissions of Photos has been unable to repair permissions on your library.  Quit smoking»

  and in the console:

  16/01/2016 10:20:09.451 pm Photos [15652]: start the Permission repair library

  16/01/2016 10:20:09.749 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 57m38s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  16/01/2016 10:24:38.962 pm Finder [390]: [QL] LSCopyDefaultApplicationURLForURL for file:///Volumes/Photos/Hatken%20Photos.photoslibrary/Database/metaSchema.db returned error operation could not be completed. (OSStatus-10814 error.)

  16/01/2016 10:24:44.124 pm mds [65]: (Server.Error:221) unable to save the path ' / Volumes/Photos "to store {storeID:0x6b000080 registered: YES private: NO age: 4m34s uuid:F8233BD0 - 9FD7-4BE1-84 C 7-F24A4C2BBDBA}

  I manually changed the permissions on the entire library on the server and the shared folder for read and write by all.

  I had a few crashes photo earlier and there are a few files lock inside the photo library:

  . A FBCLockFolder that contains. FBCSemaphoreFile

  Database > metaSchema.db.lock

  The second contains:

  http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

  host name

  -Laptop - 2.local

  hostuuid

  74DC29F6-F519-5BF3-8CFA-3121D4615DDE

  NEST

  21770

  ProcessName

  photolibraryd

  UID

  1001

  which seems reasonable (a former process) but I am not convinced about deleting these, unless someone recommends.

  I am running version 1.0.1 of Photos which I believe is behind the latest version.  Is it because I need to upgrade to get the latest version of Photos to El Capitan?  It's embarrassing, especially if the Photos is buggy on Yosemite (as it seems).

  Recommendations or suggestions?

  Thank you very much

  Ashley.

  I am running version 1.0.1 of Photos which I believe is behind the latest version.  Is it because I need to upgrade to get the latest version of Photos to El Capitan?  It's embarrassing, especially if the Photos is buggy on Yosemite (as it seems).

  Photo is part of the system and is updated by installing the updates and upgrades for your system.  Updated the Photos 1.3 with new features and bug fixes, upgrade to Mac OS X 10.11.2.

  shared 'Photos', with a folder that contains a folder with our library of Photos (200 + GB).

  A shared folder is not enough to share a library between multiple user accounts. If someone wrote to the library can change the ownership of the items in the library file and the previous owner can no longer open the library.

  What helps is changing photo library to another disk (partition) with the "Ignore ownership on this volume" enabled flag.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• How to download the program Volume control for the taskbar

  Where can I get the installer of the volume control for my taskbar. I've triedControl Panel >sounds and Audio devices > check "Place Volume in the taskbar icon .

  When I check the box for "place volume icon in the taskbar" it gives me an error and says "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it, use Add/Remove programs in Control Panel.

  Where can I get the program from?

  You mention that your netbook is HP. Most of the HP products have a recovery partition. If this is the case:

  -Click Start-> Run

  -Type in cmd

  -Type in the following, substitute the C:\ and D:\ readers with your partition recovery and partition system respectively:

  Expand c:\i386\sndvol32.ex_ d:\windows\system32\dllcache\sndvol32.exe

  -Press enter, and then type:

  Expand c:\i386\sndvol32.ex_ d:\windows\system32\sndvol32.exe

  -Type exit and press ENTER.

  Your Volume control should now be restored. You can check this by opening the sound and Audio Control Panel devices and by checking the box to the volume icon to Place in the taskbar.

  If your problem is not solved or there is no such thing as a recovery partition after the return

  Hope this helps

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to reset the disk volume quota hard C

  Original title: Win XP volume quota

  I'm a partitioning of a HARD drive with win XP service pack 3.

  How reset the disk volume quota hard C, I can not get access to quota controls?

  Size of the disk, it's all the 100 GB, I can see on C is 54 GB. you will need to access the other 50 GB.

  1. What do you mean by "unpartitioning" a disc?  If you mean that you remove some partitions on a physical disk in order to have more space in a remaining partition, you should know that you will not be able to extend the partition system (usually c :)), even if there is unallocated space on the disk unless you use a third-party disk management tool.  Windows XP cannot do with its native tools.

  2. are you sure you really want to use disk quotas?  It would be unusual in their homes.
  2B. which means you that you cannot 'access' to quota controls?  You see the tab "Quota"?  Are you logged on as a user who has privileges?

  3. where are you looking that see you C 54 GB but think you should see 100 GB?