System Restore and security updates

Similar Questions

• critical error after system restore and windows updates

  I cleaned up my old computer and did a system restore.  Subsequently, I have install windows to perform automatic updates.  The computer detected 37 windows updates and install them.  After a successful windows install update, the computer said I had to reboot so I did.  Now the computer tries to start but then comes a blue screen with a bunch of text and then said: critical error.  I tried to do a system restore, and when I get to the part, he begins to restore and gets to 13% and then says critical error and I have tried to try again, but nothing happens.  Stuck... Please advise.

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a repair system restore / boot:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• System Restore and windows updates

  I tried to uninstall Windows LiveOne care safety Scanner because I uploaded it by mistake and it does not work for 64 bit Windows 7 computers.  It wouldn't uninstall.  So I tried to restore my computer to an earlier time.  Two questions:

  The Safety Scanner LiveOne is still there and I still can't uninstall it.  Any suggestions on how to get rid of it?

  The restore point was before the latest Windows updates.  Would updates have been deleted by the system restore?  I checked to see if I have the updates and I do, but I don't understand how that's possible.  No explanation?

  Just to let you know that I FINALLY solved my problems and was able to do a system restore which got rid of the Analyzer.  First of all, in order to make a system successfully restore, I had to disable self-protection in my anti-virus program.  Then I took a better dot restore by running the "scan programs affected" before restoring.  Who showed me what restore point would eliminate the safety scanner.  I did all of this while being disconnected from the internet.  It worked.  The latest updates of Windows have been removed also, but I downloaded them again, so now my computer should be back to where it was more or less before I downloaded the scanner.

  I learned another thing, and this does not assume that a program for Windows 7 is automatically correct for a 64-bit Windows computer.  I consider that it could not be.  It would have been nice if the download scanner security indicated in a very good location that was for a 32-bit computer only.

  Thanks for your efforts.  They are appreciated.

• 32-bit Vista, System Restore and windows update are suspended.

  This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.

  What can I do?

  I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.

  can anyone help please?

  Thank you very much.

  Hello

  You should go to the system manufacturer's website and get the latest network drivers wifi and card.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.

  Maybe the other pilots. software and updates to the BIOS, you can get there.

  Control Panel - Device Manager - double-click on a device and check the version.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  then also make - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Rob - bicycle - Mark Twain said it is good.

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

  Please correct this update security update 2016-001 El Capitan and security update 2016-005 Yosemite.

  My screen freezes during my login on my i - Mac!

  I tried 2 times with the same result. Restored my i - Mac 2 times!

  My iMac after this update of market with gray screen too, very bad update in safe mode.

• I did a system restore and I went to do my updates, but get this error number: 0x8024400A

  I did a system restore, and I went to do my updates, but this error occurs, could someone please?

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Hello

  1. don't you make changes on the computer before the show?
  2. what Windows update you are trying to install?

  Method 1:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Perform a clean boot and try to update windows and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  
  Method 3:
  You can also try the steps in the supplied knowledge base article and check.
  You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
  http://support.Microsoft.com/kb/943144
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756
  Method 4:
  You can also follow the article mentioned below to resolve the error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

• How can I find the file that is missing that prevents me from doing a full system restore and stop my security seal glue

  I recently discovered that I have a missing file that prevents me to do a complete system restore and also I

  think it prevents my security seal doesn't stick to connect to Yahoo! How can I restore it?

  Hi Christine,

  Welcome to the Microsoft Community and forums thanks for posting questions.

  Looks like you are unable to run the system restore and unable to connect to Yahoo. Please answer a few questions to refine the question.

  1. What is the file that you are talking about?
  2. What is the full error message?
  3. what happens when you try to connect to Yahoo.com?
  4. Once you get this file missing error message?

  Please visit the following link to ask a question on help forums http://support.microsoft.com/kb/555375

  I would be able to guide you in the right direction, once I get the above information.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• I ran a system restore and now I can't remove my norton antivirus

  I ran a system restore and now I can't uninstall norton antivirus to install a new antivirus

  The following Symantec tool should help:

  Download and run the Norton removal tool to uninstall your Norton product
   http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  Kind regards

• I have a problem with my laptop system restore and I can't open it

  Original title: Please help me
  -----

  Dear friends
  I have a problem of my laptop whit system restore and I can't open it.
  A few days ago, my windows xp reboot both and colud not restart my computer. I had to use my back for recovery system because the other option as in mode without failure or last good configuration didn't ' work corectly.
  This event occure to me several times and I am very confusede on this subject. . I have latest version of avast anti virus in my laptop. Please guide me and give me your solution for my problem towing?
   
  Thank you for your kidness

  What happens and what do you see when you try to open the system restore?

  When you say things "did not work", we need to know which "did not work" means exactly... I get an error message, nothing seems to happen, the system crashes, etc.

  Try answering the following questions, the better you can:

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I did a system restore and now I can't connect to internet

  My computer was working very slow so I did research to find out what might help him to run faster, I found that by doing a system restore might help so I tried it and after it was over and I tried online my computer does not connect and said it was a mistake and asks me if I want to send an error report but still wont let me online so I don't then went back to undo the System Restore and still unable to connect to the internet any help no matter which could offer would be appreciated thank you remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello tashao26,

  1. What is the exact error message when you try to go online?

  2. what web browser you use on your computer?

  If you use Internet Explorer and the error you are referring, it seems to me that Internet Explorer crashes on your computer. You can check the link below for this problem:

  http://support.Microsoft.com/gp/pc_ie_intro

  Also, if you have Internet Explorer 7 or later, you can check the link below:

  http://support.Microsoft.com/kb/926449

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Fact a system restore and now my windows won't let me not uninstall all programs

  Original title: Vista 64 home premium will not let me uninstall

  I did a system restore and now my windows won't let me not uninstall all programs

  Hello

  • What happens when you try to uninstall the program?
  • You receive an error message?
  You can check this link:

  Problems installing and uninstalling programs on Windows computers
  
  http://support.Microsoft.com/kb/2438651