System Restore error

Similar Questions

• System Restore error (0 x 81000202) event log

  I m having problems with my entire system so I'm trying to restore but I have this error.  I have no sound my icons have changed all my security features are disabled and will not not turn on.

  There is much info on this option if you goto http://support.microsoft.com/.  Put in (0 x 81000202) event log system restore error in the search box.  Make sure you spell not restore correctly.  I copied and pasted your title in the search box, and the only thing that came was your article.  Then I noticed the fault of strike.

  For the most part, it is to create a restore point and turn it on.  If you do not have restore points then all of this information will not help your current problem.   What a "Factory Reload" or you have any records to reload it?

  When you say does not illuminate, you hear the security features?  In addition, enter Windows in safe mode to try your restore: which is to hit the "F8" key until Windows starts to load.

• 0 system restore error 80070005 x

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  After that I downloaded a Windows critical update, change the icons in my taskbar, so I tried to do a system restore.  Now, I can not complete the restore of the system's message: impossible to extract the file (C:$ Extend\$ RmMetadata\$ Txf) the restore point.  An unexplained error occurred system restores (0x80070005).   I had this happen before around the first of the year.  How can I fix it?

  Ruth

  already answered

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070005/728b2420-739b-4C9B-8f50-99d0b66d9b19

  http://www.SevenForums.com/backup-restore/48067-system-restore-error-0x80070005.html

• System Restore error: 0 x 80070571

  Separated from this thread.

  Judge that the method and the computer has stagnated at 28% more than an hour until I hard out there. Is there another way to fix the disc? The Base filtering engine does not also some other dependent process making it useless for example Firewall, internet connectivity

  Hi George,.

  Welcome to the Microsoft community.

  According to the query, you get the system restore error: 0 x 80070571 when you tried to perform a check disk (Chkdsk).

  To help solve your problem better, could you give us the following information?

  1. Why you try to run Chkdsk? Are you facing performance issues?
  2. You get an error code when running Chkdsk?

  This is perhaps due to the corruption of user account or corrupt file system or any software of third-party programs.

  I suggest to create a new user account and then try to perform a system restore.

  See the following Microsoft support article to create a new user account and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  It would also be useful if you we post the logs in Event Viewer to analyze and solve the problem better.

  Try these steps and let us know the results for assistance.

  Thank you

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Code error WinDef 8050800c and system restore Error 80070002 are related

  Hi all

  During the last weeks of twoo many discussion happened for WinDef - and MSE-error 8050800c.  The problem known inside this WInDef cannot scan or update at required intervals, created havoc and thousands of users are complaining about and at the same time try to find a solution.

  I am one of those users.  The question is not only that MS has not come up with a fix, but also this WinDef exhibits strange behavior.  Strange in a sense that one day working and the other is not.

  At the same time, people started having problems with the system restore in Vista, where everything is working correctly, except for the fact that the system will be back on the date indicated, coming with a notification "unknown error" and an error code 80070002.

  I am one of those users too.  Looking around the solutions both almost simultaneously and recent issues that hit my pc, I found that the solutions proposed by the MS people are circling around the keys to register ProfileImage.

  These questions are treated as separate issues, I think they are related.  For example, in this forum, regarding the error of WinDef a solution has been proposed recently around the ProfileImage.

  But a similar thing has been proposed by MS team, study the problems of SR points.

  Please see these links.

  WinDef: http://social.answers.microsoft.com/Forums/en-US/msescan/thread/a5810b32-5470-46aa-8be4-634f06064131

  System Restore/backup: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx

  I appreciate your point of view and a possible solution to these two problems please.  Note that I already checked my ProfileImage values.  Well, all are created, except for a key that is where it seems completely empty.

  Thank you very much in advance.

  TrDo.

  Hello

  Thanks for the information; your efforts are very much appreciated.

  This happens when the Windows Vista Restore Wizard cannot access the files due to access denied or restore points missing or damaged.

  To restore the computer to a previous state, make sure that there are no corrupt restore points and backup Windows and Volume shadow copy services are also running.

  Connect to the computer as an administrator and follow these steps.
  1. start Windows Backup and Volume Shadow Copy services.
  a. Click Start, type services.msc and press to enter.
  b. search for Windows Backup and Volume Shadow Copy services and start them.
  2 start the computer in safe mode and open the system restore and check the result.
  Safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Unexpcted the system restore error

  When I try to use the system restore, I get this:

  There was an unexpected error.  Class not registered (0 x 80040154).  If please close the system restore and try again.

  Only tent still once does not work.  It gives me just the same message.  How can I fix it?  I have run the checker system files & nothing damaged were found.  I am running Windows Vista Home.

  Thank you in advance for your help!

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• System Restore error 0 x 80042315... Help!

  I had some computer problems so I thought I would try a system restore. Then, I had (and continue to receive) a message that says "no restore points were created on your computer's system disk. To create a restore point open System Protection.

  I do it.  However, when I click on 'create' I get an error window that says:

  The restore point could not be created for the following reason:
  VSS encountered problems sending events to the writers of.  (0 x 80042315)

  Please try again.

  HOW CAN I SOLVE THIS?

  Hi starrynite522,

  Welcome to Windows 7 answers Forums!

  I first suggest you to check if the Volume Shadow Copy service is running.

  1. click on Start, type Services in start search. When the page is open, find shadow copy Volume service.

  2. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  3. If it is stopped, select Start or restart.

  Check if you can try to create restore points after starting the service

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  If you have installed security software, then try to temporarily disable the security software and check.

  You can also check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• System Restore error - how to start repair disk Vista?

  I get an unspecified error (no error code) when I tried restoring the system for some time. Now a registry cleaner destroyed havoc with my device, boot sector is very slow and more from programs and safeguarding of this "so-called better sides.
  registry cleaner does not work as well.

  So, I think that my only recourse here is to use the Vista installation disc to allow the use of system restore, which continued to restore the files. But when I try to use repair, it does not list my operating system, and when I go to the next screen to find, it lists all kinds of sources that I'm not one to use.

  I use Vista Business

  Thank you

  joanjps, see make repairs of the environment of Windows (from Windows Vista Inside Out) recovery system for more complete details on startup repair options.

  If the Windows Vista startup repair does not find your OS, then it means that the boot record may have taken place, you can use the Startup Repair bootrec.exe command to fix your boot manager entries, see the following article for more details on Bootrec.exe: http://support.microsoft.com/kb/927392.

  Whereas the registry cleaner has been a cause of many failures you lived, I reinstall hightly recommend you back up your data and perform a system.

  Methods to backup your files

  Installing and reinstalling Windows Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore error # 0 x 80070057 on Vista OS

  I tried to run the system on my Vista operating system restore, I have rec'd msg of error, incorrect parameter.0x80070057.

  I was able to use sys res in SafeMode only.

  Is there a way to fix this or do I have to reinstall Windows?

  Any help will be greatly appreciated.

  Thank you

  Ray

  Hello

  1 did you change on your computer before this problem?

  2. why you try to run the system restore?

  You can follow the suggestions and then check.

  Method 1

  Run the System File Checker tool.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  Check to see if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 3

  Security software disable temporary and check.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• I can't access the 0x8004230F system restore error code

  My computer started to really slow down while I was getting ready to go to the system restore to go to an earlier date when it worked fine, but I get an error code

  0x8004230F. it doesn't let me create a restore point, or access previous restore points. Thanks for any help I could get on it.
  Laptop Toshiba running Vista 32

  Hello

  Malware will interfere with restoration of the system to try to remove yourself from this way

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________________

  other reasons for problems with system restore;

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Execution on the system restore error

  Hi, I have a problem with my PC and tried to do a system restore, but I get the following error when I try: "Microsoft Visual C++ Runtime Library." This application has requested the execution to terminate in an unusual way. Please contact support for the application for more information. "I have Windows Vista.  I tried to do a restore of the system Safe Mode, nothing works. Help, please. Thank you!

  Hello

  · What is the reason to perform the system restore?

  Try the methods and check them off below if it helps:

  Method 1:

  Try to restore the computer to a different date and check the results.

  Method 2:

  Download Microsoft Visual C++ 2010 redistributable and install the same.

  You can download from the link below: Package redistributable Microsoft Visual C++ 2010 (x 64): http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bd512d9e-43c8-4655-81bf-9350143d5867

• System Restore error: tried all solutions in the posted forums. Halp?

  Halp me please :(

  Norton anti-virus Malwarebytes and Kaspersky TDSSKiller found some unpleasant things on my computer last night, and after having tried to delete/quarantine unpleasant things and reboot, Vista is now impossible to load beyond the screen "Please Wait..."/Welcome. I let it sit for about 5 minutes solid, then the screen blurs and I'm stuck.

  I can boot into Safe Mode with network (as well as all other security mode), so I tried to do a system restore, but nothing helped. I have been searching forums literally ALL THAT DAY and we tried ALL the tips and solutions of publication.

  "ERROR: System Restore failed due to an unspecified error." The setting is incorrect (0 x 80070057). »

  1 Norton is off and I'm in Mode safe

  2. I have run the sfc/scannow command and told me "Windows Resource Protection found corrupt files but was unable to solve some of them."

  3. I have run the command chkdsk and told me "errors found. Chkdsk cannot continue in read-only mode"and"Chkdsk cannot run because the volume is in use by another process.

  4. I tried selecting the option "Repair my computer" in the start menu advanced, but when I go to sign in, it says my username or password is incorrect. Impossible! Impossible to overtake this dialog box, I have to restart the computer using safe mode.

  5. I tried to boot from the last good known as well and it takes me still on the screen "Please Wait..."/Welcome of death...

  An additional note: when you use Google in Mode safe mode, I tried to visit a legitimate forum link and was redirected to a spam site. When I tried to hit the back button, it's as if he wouldn't let me leave, constantly asking me if "I knew? This seems to be a kind of virus-y thing. I thought that Safe Mode was safe? My virus problems would be bad enough that even the Safe Mode is infected? Sad :(

  I'd really appreciate some feedback. The other just posted solutions do not work for me.

  Thank you very much!

  A virus that has infected operating system files or program files can be active in safe mode.

  Here are a few things to try:

  1. Because your computer has Norton Antivirus, you should disable Norton product Tamper Protection before you run the system restore.  This is not the same thing to disable Norton Antivirus.
  2. Demarrer start from a Windows Vista installation disc, select repair your computer and run System Restore from the System Recovery Options menu.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• System Restore error ox800705aa

  I tried to do a system restore and got the message "unspecifed error has occurred during the restoration of the system (ox800705aa).

  Hi jloller,

  To work around the error code, please follow these steps.

  1. close all applications that are not necessary to perform the backup.

  2. ensure that you have sufficient disk space on all the drives where system restore is enabled

  3. turn off any antivirus/firewalls installed on the computer. Very well, they can interfere with the backup process. If antivirus software is being used, close to its icon on the tray (a small icon next to the time). Close it by double-clicking on the icon and selecting Disable. Refer to the documentation for the anti-virus software for more information on how to disable it.

  4. perform the clean boot in order to avoid all possible scenarios of a third-party service interferes with the backup process. Once the system is in a clean boot state, run the system restore.

  Reference: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Notes:

   

  ¯ Run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

   

  ¯ Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the above article.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think. 

• 1: 0x80042318__2 system restore error: Windows Media Player 11 will not work open__3: Internet Explorer 8 crashes when opening.

  I have these three questions of program after reinstallation of Windows Vista and tried (mostly unsuccessful) using Windows Easy Transfer to move and reinstall my programs and files. My computer had some problems before start, (it would be almost always gives me the blue screen at startup and go into Startup Repair). The Startup Repair wouldn't fix anything and just lose about 20 minutes of my time. Finally, he wouldn't even load at all and the Startup Repair did not help so I decided to reinstall Windows Vista. It worked perfectly until what stupidly, I decided to try and use Windows easy transfer if everything goes well "to" my programs this new copy of Windows Vista.

  So now my questions are: Windows Media Player 11 does not open. I don't see a thumbnails of videos that would open with Windows Vista either. Oddly, although I can use Windows Media Center very well. I also installed Quicktime player and it seems to work perfectly.
  It was not catastrophic but especially a gene. I use VLC player to manage most of my videos very well, but love using WMP before.

  Second: I can't create restore points at all. Once I try, I get this error message:
  "The restore point could not be created for the following reason:
  An error was detected in the copy Service VSS (Volume Shadow). The problem occurred while trying to connect with the VSS writers. Please check the event system service and the VSS service are running and look for errors related to event logs. (Ox80042318) Please try again. »

  Finally, for some reason any after the transfer, eventually after Internet Explorer automatically updated it will completely freeze when I open it. This is for me the prompt to open the session previously was crushed, and if I try that or close the dialog to open just the home page, it will freeze completely, even the blue circle next to the name of the tab to load.
  Fortunately, I have Firefox and Google Chrome installed, both work very well.

  Any help is greatly appreciated. I'm not entirely fretting on IE8 and WMP 11 but I feel really that less stressed if I know that I have a System Restore Point in case my previous numbers start to happen again.

  Here are my system specs, in case that dans le cas ou c' est is somehow useful.

  Dell Studio 1535 laptop
  Windows Vista Home Premium 32 bit
  Service Pack 2 recently reinstalled
  Intel Core 2 Duo 4 Ghz processor
  3 GB Ram
  4.0 Windows Experience Index/Rating

  Big thanks in advance to anyone who can give a glimmer of assistance. I tried searching on these issues online and found no help. My next step is the Dell technical support (.. don't looking forward not to y).

  Do you have these problems if you for testing purposes create a new user?

  Other things you can try after trying the suggestions "Sreenkanth T" is to run the ChkDsk program.

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found

  Windows Easy Transfer moves not installed third-party programs on the whole, he does that move their settings, your files and settings Windows.

  As you have just reinstalled Vista, where were your old programs and files (on which machine) when you used Windows Easy Transfer, you still have access to them?

  You have to maybe do the reinstall once more but forget your settings and just manually copy all of your data?  This way you will give you restart with no old parameters of any other machine?

  You can also consult the third-party program (costs a little money), but he can move everything, including the programs installed.

  PCMover
  http://www.laplink.com/PCmover/index.html