System Restore will not initialize.

Similar Questions

• My 'system restore' will not initialize. How to fix the problem?

  "When I choose a restore point, restoration says" initialization ", but it will work for ten minutes, never boot if you don't stop him. When I reboot sytem and click on system restore. It is said to "undo the last restoration. It is never initialized first. I used restore before but never had this problem. What I have done or not done?

  Great help, Scott.  You jerk off.

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Two issues here, 1st system restore will not restore, also wireless do not detect all networks

  Prob with system restore is everything goes well until the pc restarts, then get the restoration of of message without any changes have been made to your computer, this tent after several different restore points.

  The prob with connection Wi - Fi (intel pro 2200 bg) is it doesn't find any networks, pilot verified also that his permit, any help there ain't a pc wizz so any advice appreciated

  System Restore is not a panacea.  If this can help depends on what specific changes you want to cancel.

  Which leads to the question: what is is happened just before things stopped working?

  You do not mention if one of potential errors 13 to restore the system applied to you, or if none did, this error message you got when you tried to use the system restore.

  To do this:

  Tried the keys that turn off wifi nothing not even the light that says its /running activated

  say that the light associated with your wifi adapter is not turned on or off?  If Yes, I suppose that the light is 'off' now, correct?

  Further, I guess that the wifi card is internal and you have a portable computer.  What is the brand and model of your computer?

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Click on the + sign next to "network adapters."
  If there is an icon of warning/error next to an entry, double-click the entry and to report to what appears under the "Device status" and "Use of the device" (both on the general tab).

  Go to network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your wireless adapter and select Properties
  You will see a screen like this, and if so, is the on your box is checked the--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Index.shtml

• System Restore will not restore complete

  My computer started running verrrry slowly, so I ran to the restoration of the system. I ran it several times, both in and out of Safe Mode, with different restore points, but the food never ends. I've also run System File Checker, but the system restore does not always end. I have XP pro, and all high priority updates are installed. I would be grateful for any suggestion, but please keep things simple. I'm not savvy in computer science.

  Thank you.

  Ikallicrates

  I made a new user who had no Favorites (of course), logged as a user and just copied user Jose Favorites to the new favorites of the user folder and they appear in IE and work very well.  Favorites are just text files.  There is no register of edition.

  rpggamergal - is there a reason that does not work?

  If your user original is/was really altered, apparently tidy to subsequently remove it and if you change your registry database to point to the folders and files in the "corrupt" user account, they would all stop working.  Changing the registry will work (I think), but it's almost like cheating to me.

  If you change the registry, every time you make a new favorite, he will enter the profile that have been corrupted. Does make sense?   If it is really corrupt, I would completely RID.

  I don't think you should have made a new user first return to page 1.  This is not the problem with your system restore.

  How your system restore works now by the way?  This is your original problem.  Now you introduce new users, copy the profiles, change the registry, etc..  I've never had to do these sorts of things just fix SR.

  I think that your hole is to widen my friend...

  Turn to page 8!

• System Restore will not work for any date and computer says that it is running in auto mode.

  I have a 30 GB master and slave of 160 GB. 26/03/11 I copied a large file of 11 GB of the master to the slave because I received alerts that the disc was or almost. After you have copied from C to D, I deleted the C file and the missing file of the two drives. I tried to use the restore of the system without result. No matter what I do "Unsuccessful System Recovery" is the only message I get. Is it possible to recover a file that took me hours to compile it?

  This looks like a self-inflicted wound / pilot error.

  Deleting files in the Recycle Bin does not release disk space.  When you delete things in the trash, all you really do behind the scenes moves the items from one folder to another folder (the folder to the Recycle Bin).  They always take place until you clear items from the trash.

  System Restore won't help you recover personal files anyway - this isn't what he does.  SR cares your personal files.

  A backup will help recovery of personal files.

  I think it's against the rules for people at Microsoft to suggest or sometimes even to read all the information of any URL Internet that does not begin with microsoft.com, where the previous warning about third party programs.

  However, I think that to get off the beaten track (as they say).

  This is a popular program of third party who sometimes helps to recover accidentally deleted files:

  http://www.Piriform.com/Recuva

  It may be too late for your files, but I would also check the configuration of your trash if you have several volumes of hard drive from your symptoms question do not quite add up correctly.

  Even if SR would not help in this case, your SR expected still works what is another potential problem to solve.

  Now I'm folding stock and return things to the technical support engineers.

• My system is continuously restarting and willingness to complete start only in safe mode. System Restore will not work even through DOS command. What to do next?

  Running Vista SP2 64 bit on a Dell Inspiron 530.  System will come up to the login window, if there is no connection - will restart on its own, repeatedly.  It will allow me to log in, but as soon as I get on the desktop, in a short period of time, it will restart.

  I am able to connect through safe mode and safe mode with networking mode.  I tried the system restore by selecting many different restore points using rstrui.exe / offline: C:\windows command safe mode.  The operating system is running on the C drive.  Status on C «Ready to restore» watch

  He always enough immediately cause the error:

  System restore failed... System restore failed due to an unspecified error.  The parameter is incorrect.  (0 x 80070057)

  I did not knowingly install something again before that happens.

  What to do next?

  Hello

  Here's how to use the system without a command restore.

  http://bertk.MVPs.org/html/restoresysv.html

  And information of Dell.

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if this does not resolve your problem, please contact Dell or their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• System Restore will not work, said that there is an error and try a different restore point

  When I try to use the system restore it always fails, it says there is an error and try a different restore point, I did several times and it still does not work, can you help me. Thank you

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Why the system restore will not work correctly?

  When I run the system restore I get message saying that it did not work properly and system has not been restored at that earlier time. This has happened several times now.

  Hello

  If you use Norton which will cause problems with the restoration of the system; clear all by doing the system restore.

  You would like to try to make the system Safe Mode restore, because that will often fix the problem:

  http://bertk.MVPs.org/html/safemodevista.html

  Use the arrow keys to move to the top or to the bottom of the list of Options > use then ENTER key to select Mode without failure.

  See you soon.

• Keeps interrupting, System Restore will not recover at an earlier date to fix the problem.

  My laptop will be freeze/lock up if left alone for a few hours. It does nothing, so I have to use the power button to stop it. When I do it says Windows is not stopped normally. I can't restart from the start menu. I tried the system restore, but it wont let me restore to an earlier date.

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/dbfe2175-E035-4568-90aa-590267d13b04/

  Your freezing question answered in another Forum.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/59e814ad-EFEC-4B6A-8D64-2f8075bce281/

  And in another Forum Vista say you now that you are using Windows 7.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• Windows XP3 system restore will not work

  system restore going through all the procedures but always says "unable to restore this date your computer has not changed."

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

  Original title: I lost the office and all programs-system restore won't work

  I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  Hello
   
  1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
  2 have you made changes on the computer before this problem?
   
  Please answer these questions and to provide more specific information on the issue. This could help us help you better.
  The following articles could be useful.
  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
  http://support.Microsoft.com/kb/318027
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248