System Restore will not restore complete

Similar Questions

• Dungeon of "system restore completed successfully" message appear, wheb ever I turn on my netbook.

  Hi there recently to use "System Restore" option to fix my USB dvd driver Issos, it has been altered and my dvd rom usb does not work, I was able to fix it with the system restore. But after the message "system restore completed successfully" keep popping up every time I start my netbook and will not stop appear. It will disappear at some point? or something needs to be repaired? I have Windows 7 on an Asus net book. Is works very well, but it just bothers me that pop up message, everytime I turn on my net book.

  Please help me if you can.

  Thank you

  Hello:

  Thank you very much for taking your time to help me, I really appreciate it. my net book seem to be starting now normal after an update of the small window 7, not sure because it is the patch or the 'message' is the time to come for 48 hours, but never the less, thank you. If anyone has the same experience please let me know, I would like to know if it was just a feature of Windows 7 or not.

  Thank you all

• Did a system restore complete with built-in recovery partition on the hard drive, the recovery went well, but the computer is still slow and freezing.

  Original title: computer always slow and freezing after clean install

  It is a compaq 2007 desktop running windows vista premium, I work on it for a friend, they said he was running slow and freezing up all the time so I just went ahead and did a system restore complete with built-in recovery partition on the hard drive, the recovery went well but still have the same problems with the computer being slow and freezing up. any help would be appreciated thanks.

  Hello

  
  Step 1: I suggest you try the steps in the Sub articles to solve the problem of vista performance.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-computer-speed-and-performance-information
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-maximum-performance-from-Windows-Vista-from-Windows-Vista-inside-out
  Step 2: You can also check if the problem persists in the clean boot state.
  
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• Adobe creative cloud will not be completely updated

  I have cloud creative adobe and it will not update completely.  I see where ACR updated to 9, but when I check Photoshop cc is still 2014 and the cc update application stops updating when it gets to about 43 percent.

  Help please.

  TIA

  Please check:

  Re: creative cloud hangs at 42%

  Creative cloud app not install CC Apps or update CS6 Apps

  Concerning

  Stéphane

• HP Pavilion 15 laptop: HP Pavilion 15 laptop: System Restore completed successfully. The problem is not resolved.

  About 3-4 weeks ago, my computer found himself in a reboot loop. I was not online at the time where he was probably not due to an update.

  After going on the HP Web site, it was first suggested that the issue could be overheating due to dust. I followed the instructions but it does not work.

  Diagnosis is directed which has determined that there are no problems with the hardware or memory.

  Then the site suggested that I do a Refresh system or a system restore. I tried the cooling system. It did not work.

  I contacted HP Tech Support hotline and they told me to update the drivers. Drivers cannot be updated / installed (by me at least) in Safe Mode, if it does not work.

  Then told me the only choice I had was to do a Factory Reset/System Restore.  After the purchase of an external HARD drive and backup of my files, I tried to do the factory reset. I received a prompt to insert a disc, but computer did not come with a disc. If it does not work.

  Then I was told by support that I had to buy "recovery disc" or a new copy of Windows 8.1. Technical support said it was the only way to solve the problem. By chance, I found another video that shows how to access recovery tool of real system since menu troubleshooting at start-up.

  System recovery completed successfully. However, while creating the new installation of Windows 8.1 (implementation name, country, favorite colors, e-mail etc.) the original reboot loop problem started. If it does not work. Even worse, because the Windows installation is incomplete - and can complete because of the reboot loop - I can access more fashion is safe.

  Any help or advice would be greatly appreciated. Miracles would net you have my firstborn (eat too in any case).

  Okay, so I had to take the machine to a technician. What she said is that it was certainly not a hardware problem. Its best estimate is that my computer As witn infected a Trojan horse which subsequently transferred, entered the BIOS and corrupted partition.

  Short history of Tech, they fixed by redoing the BIOS and installing a new copy of Windows 8.1. I asked about the other options that I received. She explained that a remote technical support could not fix the problem, nor recovery disks could solve the problem.

  My advice to all who encounter such a complex problem, when you contact HP Support don't forget to request contact information for a local HP technician, licensed (I only asked for this in desperation by accident). Just in case your problem is not easily diagnosed or solvable, it might just save you some time, money and spare you confusion.

  As for how I got infected with the Trojan possible in the first place, no idea. The only thing I can think is that I've opened an e-mail looking strange but legitimate to someone I didn't know. However, it was about 6 months ago and the problem started a month before, so I at least do not know if there is a link. However, it is always good advice not to open strange e-mails. Note that the technician did say that even if I had Norton installed, it would not be able to automatically detect the problem. (I wonder if I called Norton technical support if they could have helped or pointed me in the right direction faster. But even once, any comments or information I received from HP technical support gave usable clues. "And refresh the system that has been proposed did uninstall Norton).

  So, I have a computer to work again. I hope this info can be useful to someone and avoid frustration. Thanks to everyone who took the time to read my post.

• System will not start completely, blue screens and then restart

  Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

  To boot from a DVD, positioned on the BootOrder:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• List of "programs and features" will not be complete as it usually must (Windows 7)

  OK, now when I open the "programs and features", it usually has all the stuff of software or a program that is installed in a list, but this time, when I opened it, only 4 programs I didn't need to look at are the only ones that have been listed, I need help, because I need this list for re - fill as it is supposed to

  How long because he was working last?  Is this a recent problem that the system restore may be a fix?  This article also mentions the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  In Services, the Windows Installer Service is disabled?  Type services.msc in the start RUN box.

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See if any other programs or non-Microsoft Services are the cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Also check in safemode and try also to create a new user in the Normal Mode to see if it's a profile problem.

  Advanced Startup Options Vista (Windows 7 too)
  http://Techblissonline.com/Vista-advanced-boot-options/

  Discover this registry location and check that your username is allowed to read the key.

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall

  To verify permissions right click on the key called "uninstall."  If you the user has no permission to read the key could be a cause.

  Keep an eye on this thread too.

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/a8da11de-088D-40AC-a5cd-fca11ede7932

• my windows installation will not be completed which is why my pc not started.what can I do?

  My a was restart again, once again, then I update my Windows xp with the cd... what cd copying files after removed my pc blocking at 59% of the files.then copy I switch off the pc after startup it is not working properly and always crashes after awhile as before... my installation of windows will not be not complete which is why my pc don't started.what can I do?

  Hello

  Do you have any other operating system installed on the computer?

  The CD/DVD that you use to install Windows XP may be damaged and this is a possible reason why you cannot complete the installation of Windows XP.

  You can check with another CD/DVD to install Windows XP. In the meantime, you can also check out this link that talks about the installation of Windows XP.

  Install Windows XP
  http://Windows.Microsoft.com/en-in/Windows-XP/help/Setup/install-Windows-XP

  You can also check out this link that talks about the hanging of Windows XP configuration.

  http://support.Microsoft.com/kb/828267

  It will be useful.

• Windows will not start completely after you apply updates 14/08/2012.

  The windows startup screen appears, and then the screen turns white with just the cursor.  The cursor is mobile.  Make a start with a lit boot record, it seems that many drivers do not load.

  When processed the update restart and the laptop it worked fine for a few minutes, but then blue screened with a network driver error.  He continued to do so at every reboot.

  I grew up in recovery mode and tried to restore about restoration of pre-upgrade.  The operation failed, and when starting, he started the above behavior.  Here are the last entries in the ntbtlog.txt file.

  Did not load driver @nettun.inf,%teredo.displayname%. Microsoft Teredo Tunneling adapter
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Does not load the card ATI Radeon HD graphics driver 3200
  Did not load driver @hdaudss.inf,%hdaudmodel_amd_rs690_devicedesc%. Audio device high definition
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2382.devicedesc%. JMB38X SD/MMC Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2381.devicedesc%. JMB38X SD Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2383.devicedesc%. JMB38X MS Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2384.devicedesc%. JMB38X xD Host Controller
  Did not load driver @oem29.inf,%athr.devicedesc.h3067%. Atheros AR5007 802. 11 b / g WiFi adapt
  Did not load driver @oem48.inf,%rtl8102.devicedesc%. Realtek PCIe FE Family Controller
  Has not been loaded @oem37.inf,%st.devicedesc%;IDT driver High Definition Audio CODEC
  Not load the Keyboard Filter driver
  Did not load driver @battery.inf,%acpi\pnp0c0a.devicedesc%. Battery method control compatible ACPI Microsoft
  Did not load driver @battery.inf,%acpi\acpi0003.devicedesc%. Microsoft AC adapter
  Did not load driver @battery.inf,%*compbatt.devicedesc%. Microsoft Composite battery
  Did not load driver @netavpna.inf,%mp-agilevpn-dispname%. WAN Miniport (IKEv2)
  Did not load driver @netrasa.inf,%mp-l2tp-dispname%. Miniport Wan WAN (L2TP)
  Did not load driver @netrasa.inf,%mp-bh-dispname%. Miniport Wan (Network Monitor)
  Did not load driver @netrasa.inf,%mp-ip-dispname%. Miniport Wan (IP)
  Did not load driver @netrasa.inf,%mp-ipv6-dispname%. Miniport Wan WAN (IPv6)
  Did not load driver @netrasa.inf,%mp-pppoe-dispname%. Miniport WAN (PPPOE)
  Did not load driver @netrasa.inf,%mp-pptp-dispname%. Miniport Wan WAN (PPTP)
  Did not load driver @netsstpa.inf,%mp-sstp-dispname%. Miniport WAN (SSTP)
  Not load the VirtualBox in Ethernet Adapter driver
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @nettun.inf,%6to4mp.displayname%. Map Microsoft 6to4
  Did not load driver @oem102.inf,%product%. EasyTether Network adapt
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%teredo.displayname%. Microsoft Teredo Tunneling adapter
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Does not load the card ATI Radeon HD graphics driver 3200
  Did not load driver @hdaudss.inf,%hdaudmodel_amd_rs690_devicedesc%. Audio device high definition
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2382.devicedesc%. JMB38X SD/MMC Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2381.devicedesc%. JMB38X SD Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2383.devicedesc%. JMB38X MS Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2384.devicedesc%. JMB38X xD Host Controller
  Did not load driver @oem29.inf,%athr.devicedesc.h3067%. Atheros AR5007 802. 11 b / g WiFi adapt
  Did not load driver @oem48.inf,%rtl8102.devicedesc%. Realtek PCIe FE Family Controller
  Did not load driver @usbvideo.inf,%usbvideo.devicedesc%. USB video device
  Has not been loaded @oem37.inf,%st.devicedesc%;IDT driver High Definition Audio CODEC
  Not load the Keyboard Filter driver
  Did not load driver @battery.inf,%acpi\pnp0c0a.devicedesc%. Battery method control compatible ACPI Microsoft
  Did not load driver @battery.inf,%acpi\acpi0003.devicedesc%. Microsoft AC adapter
  Did not load driver @battery.inf,%*compbatt.devicedesc%. Microsoft Composite battery
  Did not load driver @netavpna.inf,%mp-agilevpn-dispname%. WAN Miniport (IKEv2)
  Did not load driver @netrasa.inf,%mp-l2tp-dispname%. Miniport Wan WAN (L2TP)
  Did not load driver @netrasa.inf,%mp-bh-dispname%. Miniport Wan (Network Monitor)
  Did not load driver @netrasa.inf,%mp-ip-dispname%. Miniport Wan (IP)
  Did not load driver @netrasa.inf,%mp-ipv6-dispname%. Miniport Wan WAN (IPv6)
  Did not load driver @netrasa.inf,%mp-pppoe-dispname%. Miniport WAN (PPPOE)
  Did not load driver @netrasa.inf,%mp-pptp-dispname%. Miniport Wan WAN (PPTP)
  Did not load driver @netsstpa.inf,%mp-sstp-dispname%. Miniport WAN (SSTP)
  Not load the VirtualBox in Ethernet Adapter driver
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @nettun.inf,%6to4mp.displayname%. Map Microsoft 6to4
  Did not load driver @oem102.inf,%product%. EasyTether Network adapt
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%isatap.displayname%. Map Microsoft ISATAP
  Did not load driver @nettun.inf,%teredo.displayname%. Microsoft Teredo Tunneling adapter
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Did not load driver @cpu.inf,%amdppm.devicedesc%. AMD processor
  Does not load the card ATI Radeon HD graphics driver 3200
  Did not load driver @hdaudss.inf,%hdaudmodel_amd_rs690_devicedesc%. Audio device high definition
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2382.devicedesc%. JMB38X SD/MMC Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2381.devicedesc%. JMB38X SD Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2383.devicedesc%. JMB38X MS Host Controller
  Did not load driver @oem5.inf,%pci\ven_197b&dev_2384.devicedesc%. JMB38X xD Host Controller
  Did not load driver @oem29.inf,%athr.devicedesc.h3067%. Atheros AR5007 802. 11 b / g WiFi adapt
  Did not load driver @oem48.inf,%rtl8102.devicedesc%. Realtek PCIe FE Family Controller
  Did not load driver @usbvideo.inf,%usbvideo.devicedesc%. USB video device
  Has not been loaded @oem37.inf,%st.devicedesc%;IDT driver High Definition Audio CODEC
  Not load the Keyboard Filter driver
  Did not load driver @battery.inf,%acpi\pnp0c0a.devicedesc%. Battery method control compatible ACPI Microsoft
  Did not load driver @battery.inf,%acpi\acpi0003.devicedesc%. Microsoft AC adapter
  Did not load driver @battery.inf,%*compbatt.devicedesc%. Microsoft Composite battery
  Did not load driver @netavpna.inf,%mp-agilevpn-dispname%. WAN Miniport (IKEv2)
  Did not load driver @netrasa.inf,%mp-l2tp-dispname%. Miniport Wan WAN (L2TP)
  Did not load driver @netrasa.inf,%mp-bh-dispname%. Miniport Wan (Network Monitor)
  Did not load driver @netrasa.inf,%mp-ip-dispname%. Miniport Wan (IP)
  Did not load driver @netrasa.inf,%mp-ipv6-dispname%. Miniport Wan WAN (IPv6)
  Did not load driver @netrasa.inf,%mp-pppoe-dispname%. Miniport WAN (PPPOE)
  Did not load driver @netrasa.inf,%mp-pptp-dispname%. Miniport Wan WAN (PPTP)
  Did not load driver @netsstpa.inf,%mp-sstp-dispname%. Miniport WAN (SSTP)
  Not load the VirtualBox in Ethernet Adapter driver
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @oem34.inf,%vboxnetfltmp_desc%. VirtualBox Bridged Networking driver Miniport
  Did not load driver @usbvideo.inf,%usbvideo.devicedesc%. USB video device
  Loaded driver \SystemRoot\system32\DRIVERS\udfs.sys
  Not load the driver for the AFD. SYS
  Not load the driver for the AFD. SYS
  Loaded driver \SystemRoot\system32\drivers\WudfPf.sys
  Not load the driver for the AFD. SYS
  Not load the driver for the AFD. SYS
  Not load the driver for the AFD. SYS

  If you are not able to get safe mode then there is a lot of damage has been done.

  I suggest slaving the hard drive to another computer to back up your data (or a boot disk OS which you leave copy on a USB device and backup your stuff).

  Then wipe the hard drive clean (DBAN or KillDisk - both are free) and then using system restore restore disks.

• What can I do if Windows does not start and system repair will not work

  Original title: pc does not start. blue screen says driver overtaking has a stack buffer and of physical memory dumps. repair of the proven system and also the restoration of the system. still no luck. Help please! Jane.

  Blue screen flashes off pretty quick so cannot read all of it. It says problem can be installed recently ware. don't the have not installed anything. Since regular programs.

  says a malicious attempt can occur. that security essentials update installed.  Windows system repair ran several times and said that he could not fix pc. Just tried restoring the system to the 22/10/11, which said it was successful, but still have the same problem. Don't know what to do now that not that computer savvy!

  Hello

  Did you do changes on the computer before the show?

  Method 1:
  You can disable automatic reboot system Advanced Start Menu fails to capture the error message and check if it helps.

  Method 2:

  You can start the computer in safe mode and check if you are able to start
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:
  If you are able to boot into safe mode, then perform a clean boot and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 4:
  You can perform system restore and startup using Windows vista DVD repair.

  What are the system recovery options?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• system sounds will not play

  Dear Microsoft,

  I felt a strange problem I was wondering that you could help me with.

  For almost 48 hours now that I've lost the ability to play sounds on the computer system - don't be fooled here; I can play sounds through my headphones or the speakers, and I can play the audio file system in other programs.  It is only when you try to play through the 'Sounds' of the volume control Manager tab, all I get is an odd clicking effect.

  It's almost as if the executable responsible for controlling audio files, performing the action attached, stopped working.  Can you tell me how to reset this feature?

  Hi Hyncharas,

  Were there any changes made on the computer before the show?

  To resolve the problem with system sounds, follow these methods:

  Method 1:

  I suggest you to follow these steps and check if you are able to hear the sounds of the system:

  a. click Start , click Control Panel.

  b. click hardware and sound and then click sound.

  c. on the sounds tab, make sure that its regime is set to default Windows.

  d. on the Communications tab, select reduce the volume of other sounds of 80%.

  e. click OK.

  f. check if the problem persists.

  Method 2:

  You can also check out the link to correct sound problems and check if it helps:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:

  If the problem is not resolved, try to restore the system to an earlier point of time before the problem occurred and check if it works:

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.

  Let us know the results.

• Reference Dell system detect will not download

  I have a Dell Inspiron 3647 running Windows 7 Home Premium 64-bit. It has 8 GB of RAM. Recently, I flashed the BIOS on the Dell Support website. It was version A04, and I flashed to version A05, without any problems. The next day I downloaded Dell system detect to check my complete system. Dell system detects is listed in my as installed Control Panel. The installing Dell system detects ran a few minutes (15 or 20), and then I got an error message that says: "the version of the BIOS is same or lower than the current Version of the BIOS. The installation will not continue.

  Can someone tell me what this means and what I can do to fix the problem? Do a new installation of my Windows 7 help me?

  Thank you

  Merton82

  This means that you are OK. The update of the BIOS worked. This should mean that the downloaded update is identical to what you have. I don't like this update program. It's confusing, and many have problems. You should ONLY do manual downloads and installation of just the BIOS or drivers you need. However, it is rarely necessary to download a BIOS updated or drivers. If you have problems with a piece of hardware, a new driver might help. Never a update BIOS unless find you other users or Dell it is absolutely necessary. Pilots don't usually cause problems if you download one that you don't need, but an update of the BIOS could brick the computer if something goes wrong, like a power glitch during installation.

• Windows 7 Ultimate Service Pack 1 (64-bit) will not download completely stuck at 95%

  I tried to install Service Pack 1 of Windows today on my laptop.  On one of my laptops with Windows 7 Home Premium 32 bit operating system Windows Update downloaded (with 4 other updates) in about an hour and installed successfully during the shut down and restart.

  However on my laptop main used with Windows 7 Ultimate 64-bit Service Pack 1 stops downloading (although he says he always download or seems to be) to 95%.  The first time that I tried to download with 3 other updates to Windows, and it stuck.  I finally stopped after about 7 hours with it stuck at 95%.  Isolated, the other downloads and downloaded and installed after the reboot and did it in less than 15 minutes.  Then began to try to download only the Service Pack 1.  It has now been underway for six hours and is still stuck on download of 95%.

  Another forum on the web had a message that the Service Pack 1 with Windows 7 Ultimate 64 bit will not download if you have installed language packs.  (Those who took me about 3-4 days to install and download due to make them one at a time because as a group they would get hung up.)  So I hope that I did not remove the language packs to get this Service Pack 1 installed on this machine.  I hope that Microsoft would have tested on a computer in Windows 7 Ultimate 64 bit with language packs installed but maybe not...

  
  

  I HAVE THE SAME PROBLEM. I GAVE TO MY VISTA NOW, I HAVE JUST AS MUCH TROUBLE I DID BEFORE.  ABSOLUTELY, NO DOWNLOAD FROM ANYWHERE.  I WOULD BE HAPPY TO RETURN TO XP.  DEE

  I feel for you Dolores it was extremely painful and tedious experience.  The final fix for my computer was going back to the origin by default with Windows Vista Home Premium on my computer.  Then load the software Windows 7 Ultimate.  Then the installation of updates about 100 + Windows which took place including Windows 7 SP 1.  All this has been done before loading another software (except Firefox and Chrome) on my computer.  I did it too before my security software loading, which – incidentally, roughly double the speed of downloads and other features of the computer.  Then after all the updates for Windows 7 has been done, I loaded with Microsoft Office Applications and its many updates.  After that I loaded my security software and checked for viruses.  Then rebuilt all the other features, software customization, etc. of this computer.  Literally, it took over a month to return to the same functionality that it had before the Windows 7 SP1 crashed the computer.  All I can say is thank God that I am religious about backing up files and folders, so I think I got about 95% of my files, folders, etc.

  Since the reconstruction, I didn't "major" problems with Windows 7, but I cringe when I update Windows 7 via their process of updating every Tuesday.  I also try to update not updates at the same time or too large sizes in the updates, even if it takes more time to do it this way.  I also reboot after each update whether necessary or not.  I run two registry cleaners different at least once a week, or even more often as since the failure of catostrophic SP 1 of the operating system.

  I will say this though, a lot of programs/software, I had that wouldn't work with Vista, all of a sudden work again with Windows 7.

  Good luck!

• system recovery will not load a partitioned hard drive

  Hello

  My dell inspiron on vista Basic has been sluggish, so I made a few stop hard downs.  After this, windows will not start and repair windows will work (on the start menu).

  recovery system cannot read the partitioned recovery drive (backup).

  Sometimes the system will display unknown hardware error d000144

  my laptop is only 3 years.  never buy a dell again.

  New programs are malwarebytes and windows defender.

  Hello

  Here is the information of Dell for the use of their recovery Partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And how to use the Dell Diagnostics software, as appropriate test equipment, etc.:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/Setup.htm#1100569

  As the Dell recovery partition is a Dell product, for other questions, contact Dell:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  Or ask in the Forums of Dell Support:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• my systems page will not open error message "the page failed to load".

  Original title: my systems page does not open after going into the control panel and then system and maintenance

  my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

  Hi Sarah Brown,.

  (1) remember you to make changes prior to this problem?

  (2) what is the complete error message you receive?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833