System startup

Similar Questions

• How access to the registry of profile to the system startup

  I have an application that uses psftp for copying files from a Linux server. (This application is the trigger to another UNIX server, - not a question here, just info)

  This works very well if there is one connected to the session of the user account on windows server (in my Windows Server 2008 r2).

  My problem is that, this application will not work if there is no connected session.

  Means, after every restart, I need to connect to the server manually with the same account user application uses.

  Found that the problem may be with the profile registry. This registry is created in HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys. (PuTTY registry is created in this place, I think)

  Because this registry is created under HKEY_CURRENT_USER, is not accessible to the system startup.

  So, I need to know how I can access this registry (HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys) from the system start?

  Can I include scripts in the startup system (GPOS) scripts. ?

  Please help me out here as soon as possible.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• 15-g019wm HP: locked system startup

  Blocking of the system startup (disabled) [# 67334208]

  Computer HP laptop-15-g019wm-Rev:21f7-100

  We are a business and customer sold it we... After the unavailability of the consumer credit services we have now lost money

  Cusomertmer was not given the password of the bios/start... but gives the victory 8 password...

  I thank very you much for your time in this matter:

  Hello

  Enter: 78092828

  Kind regards

  DP - K

• SuSE 11.0: VMware process are not started after the system startup

  Hello

  Suddenly, I have the problem, that after restarting my computer (SuSE 11.0, 64-bit) host VMware and VMnet services are not started. After you run the command "/etc/init.d/vmware restart" everything is fine - until the next reboot. I don't have any idea what caused this. I also run /usr/bin/vmware-config.pl once again, but he has just helped until the next reboot.

  What can I do to get these VMware processes started automatically with the system startup, please?

  Best regards

  Chaoshacker

  Set:

  RUN_PARALLEL="no"
  

  in/etc/sysconfig/boot

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• System startup with the following error: this application has failed to start because BHO. DLL WAS NOT FOUND.

  Original title: APPS

  WHEN I TURN ON MY COMPUTER, A BOX IS DISPLAYED THAT SAYS: "THIS APPLICATION COULD NOT START BECAUSE BHO.» DLL WAS NOT FOUND.

  REINSTALLING THE APPLICATION MAY FIX THIS PROBLEM... The APP IS ie3sh.exe... I DON'T REMEMBER TO UNINSTALL ANYTHING... I have

  THE THING OF RESTORATION WHERE YOU PUT THINGS BACK THE WAY THEY WERE AT A CERTAIN DATE... BUT THAT WAS BEFORE THE

  MORE DATE OLD HE SAID I COULD GO BACK, WHAT HAS NOT HELPED... I ONLY AM NOT COMPUTER SAVVY, SO IF YOU HAVE AN ANSWER, PLEASE

  BREAK IT DOWN STEP BY STEP... P.S. THANK YOU I USE WINDOWS VISTA HOME PREMIUM... AND I INSTALLED ALL IMPORTANT

  UPDATES... I HOPE I'M THIS SENDING TO THE RIGHT FORUM...

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to scan your hard drive for Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• system startup repair

  I had a lot of problems with my laptop computer lately. When I go to put it on a blue screen appears followed it black screen that gives me the possibility to eiter start normally or Startup Repair which is recommended. I do what is recommended and then a message appears saying that the problem cannot be solved. I continue to do over and over again but it kept giving me the same message. How should I do so that the screen is not burst again and prevent the registration of my computer?

  When you restart or switch your PC, press F8 reapitly and then you will see a few options and then chose the mode safe mode with networking and see if you can connect it. After the connection, try to http://onecare.live.com/site/en-us/default.htm

  Run the full scan of the system and see if anything will detect.

  If that does not solve the problem.

  Again, use F8, after reboot and chose last known your Setup and see if the problem solved.

  If this is not the case, use this tool:

  http://security.Symantec.com/nbrt/nbrt.asp?lcid=1033&origin=default

• Outlook and other applications to launch at system startup

  Hello

  Can anyone share how I can have the MS Outlook and other applications pref. start immediately when I start my system every day?

  It would really help me if I can get Outlook to just start charging in all of my emails that I have POP in different accounts.

  Thanks in advance for your help.

  Kind regards

  Ms. Mktg

  Hello Ms. Mktg, would be pleased.

  The best way to have a program automatically start when you connect, is to put it in your startup folder in your Start menu.

  Just open your Start menu and drag any icon down in the startup folder:

  

• cat/etc/oratab watch dbstart ' don't and DB is still up on the system startup

  Dear community,
  
  We have been facing a problem with the AUTOMATIC STARTUP of ASM and ORACLE DB. After changing the/etc/oratab * $ORACLE_SID: $ORACLE_HOME: DSO and the PB started well however the value there is to N Y *.
  
  Our + / etc / oratab + looks like this now and it starts on the startup of the system.
  
  asm: / oracle/db / asm:N+.
  ebruli: / oracle/db / db11g:N+.
  
  My question is how it is possible that these values change to N after restarting the server.
  
  We appreciate your efforts and your time.
  
  Thank you in advance.

  Restart Oracle will not/etc/oratab, use when the server restarts HAS / CRS will start and the Sir if we allow databases and it will start the databases.

• Menu of applications does not not at the system startup

  I have rebuilt a new installation of Snow Leopard 10.6.2 and VMWare Fusion 3.  Before that, when I was running Snow Leopard 10.6.2 and VMWare Fusion 3 VMWare Applications Menu would launch at the start of my Mac Book Pro.  Now, it will only appear and stand after I startup and performance of VMWare itself and VMWare then close.  I have confirmed in all of my Virtual Machines Menu Applications is defined to always display the menu of the applications in the menu bar and see anywhere where I can get this to run at startup of the system.  Help, please.

  Check if VMware Fusion Helper is set in the connection points (Apple menu > Preferences... > accounts > login items) and if it is not then add.  It is located at: "/ Library/Application Support/VMware Fusion / '.

• NB100 - failure and how to do a restore of the system startup?

  I tried to do an update on my Toshiba NB100 11R (less than a month) and it failed, and now I can't start.

  Unfortunately, I don't know anything about Linux-based systems. Tried to boot from the CD (provided) with an external USB, disk drive and can not find anywhere to make a record of rollback/beginning of restore boot from, and I'm now stuck with a dead machine.

  Any suggestions gratefully received! Thank you, Bill

  When you turn on, press F12 repeatedly to access the boot menu - from there, you should be able to choose to boot from the recovery CD (not sure in your case if it counts as a CD or a USB device - trial and error I guess!).

• FACE RECOGNITION is not loaded at system startup

  I create my foto, add them to my windows account-made everything, who has been described in the standard manual for face recognition utility.
  But... When I turn on my laptop - no icon for the face recognition is shown... just system request password as usual. I have no idea about it, please advice sth.
  Thank you.

  Hello

  The password (keyboard input) is the backup solution when you can not log of face recognition using the webcam.

  If you use the recoganization to face for the first time that the practice is very useful.
  First of all, you will be asked to move your neck slightly to the left and to the right.
  Then, you will be asked to move your neck slightly up and down.
  After that, you can click once more to practice or click to start the capture an image.

  First adjust the position of your face so that it fits in the face in the form of framework
  (back-button will be inactive at the moment.

  Once your face has been correctly positioned, the recording will start. See the red dot for recording in the upper left.
  Start moving your neck very slightly to the left and to the right as the guide, it shows to you. Now your neck up and down. You need to repeat the movement of your neck left and right and up and down several times... Just look at the guide...

  Registration to complete, after having repeatedly moved your neck left, right, up and down. Click the button for the test of authentication.
  There are two possible outcomes:

  -If the authentication (or updated) fails, click on and register again
  -If the authentication or updated is successful, click on and create an account

  Choose your Windows user name, the full name, the destination of Login, password
  And re-enter the password fields and then click.
  Return to the management screen. The registered account name will be displayed. Clicking on it will cause the image of your face to be displayed to the left. Click close to close the software (.. and come back at the beginning of the presentation...)

  To update your profile of face recognition choose and highlite your username
  and click on update.
  To update your registration with practitioner just click Next and the guide will start.
  If you choose to ignore the recognition will start without practicing.

  Check these steps and your face recogonisation should work fine

• In time real system startup in safe mode

  Hi all

  I'm having an incredibly frustrating problem.  My RT PXI chassis decided that something has gone wrong.  I don't know what that might be, but now it starts in safe mode, try to restart three times.  I have never been able to recover the logs via MAX (I get wait times), but if I go into the physical drive via ftp and poke autour in the errorlog.txt, I find the most recent error:

  29/10/2015 03:25:09.153 0-2147220694 000 Incompatible schema is detected, but no specific DD can be identified as the source.
  Please refer to the file "c:\ni-rt\system\mxsSchemaError.log" for more information.
  CmxsNeoStorage::ValidateDBStructuralIntegrity()

  If I go into the file, to which it refers, I find the following error message:

  [10/29/2015 03:25:09] * COLLISION DETECTED * between object with class NeoID:0 Database_Header located at 0 (256) and 1 list free (28344)
  [10/29/2015 03:25:09] Incompatible schema detected, but no specific DD can be identified as the source.

  Anyone has any ideas on this?  I tried all software uninstall, then reinstall.  Everything seems to be ok until I have install drivers DAQmx and dependencies out there.  But I don't think this is directly related to the DAQmx.  I think it's links with one of the dependencies.  Any input is helpful (although I want to avoid having to format because I don't have a recent copy of the MAX configuration for the system).

  Cheers, Matt

  Have you recently changed your LabVIEW versions (for example, from 2014 and 2015)?  You may need to check/put to update the software on the PXI system.

  If all else fails, it is not so difficult to "start over" with a hard drive reformatted on the PXI and install a new RT system, especially if you have a controller that does not boot from a floppy disk (don't ask--we have a lot of 8176).

  Bob Schor

• HP probook 450 G1: eror 2e3 at system startup

  my system detected an eror at the start of the bios (eror 2e3), it means incompatible 2 ddr3 memory.it run after I upgraded the memory from the system because of the 6G.what of it, and what can I do to fix this? Thanks for the reply.

  NIM.

  It's the memory that must be installed

  Memory modules (19) (PC3L-12800 1600 MHz, DDR3L)

  8 GB 693374-001

  4 GB 691740-001

  2 GB 691739-001

  DDR3L low voltage.

  DDR3L (1.35v) RAM working on Sandy Bridge, Ivy Bridge and FX AMD processors.

  Your manual here.

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5405421&docid=emr_na-c03943639&docLocale=en_US

  REO

• When system startup until the date and time are wrong

  When I boot up I have the wrong system time and date of that change that and everything works fine but when I stop computer and restart the same thing happening again any info would be appericated thanks

  When your time is not known after him turning off your computer, this is an indication that the battery on your motherboard must be replaced.  Open your case and look for a button on your motherboard battery and replace it.  Most newer computers use a CR2032 - the same that is used in the garage remotes and keyless entry for your car charms.

  HTH,
  JW

• error code 2718 at system startup

  Original title: error code 2718

  I tried to install a HP scanjet 2200c scanner and couldn't make it work. I then uninstalled! Now, when I turn on the computer, I get an error message 2718! It is annoying and would like to know how to solve this problem!

  Hi Boltman619,

  Try these steps and check the result.
  Step 1: Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:
  MSIExec /Unregister
  MSIExec/regserver
  c. start the computer and check the difference.

  Step 2: If the problem continues, check if this error is associated with linked any program currently running on the computer. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• system startup pop ups protected by MICROSOFT in sys32 file mshta

  When I start my computer, I have pop ups of * girls and Japanese writing. I can't remove it or security essentials does not detect. sound in windows \system 32------mshta. file and is somewhat protected by the installer of Mircosoft's confidence. How can I fix this? Please, I beg you.

  Hello

  I suggest you to start the computer in Mode safe, then from there try to rename the file to * .old. After you rename the file starts the computer in normal mode and check if the problem persists.

  Start in safe mode in Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
   
  Hope the information is useful.