Windows Server 2012 R2 activation problem

Similar Questions

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem

  I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.

  I want to connect the printer via USB only.

  I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.

  But every time the same problem occurs.

  The printer driver is correctly installed, but the printer HP (LEDM) driver failed.

  The debugging information:

  Installed the device.

  hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219

  If I want to reinstall the driver again, I received the message:

  Setup error

  An entry in the Inf file is missing, the file may be Windows 95...

  Could you please help me, how to solve this problem?

  I need to activate the visual experience of Windows Server 2013, then the USB works

• Windows Server 2012 Standard activation

  I just bought PowerEdge T110 II with Windows 2012 Standard operating system.

  It come with preinstalled OS? is activation required? Last time I bought Dell is Dimenstion 8400 with Windows XP, which was related to the Dell motherboard, so activation was not necessary.

  I will probably play with the installer and try different things before I install OS for the long term. If activation is required - reinstall OS more than once on the same box is problem? My knowledge of the client MS OS-es, that's fine, but I don't know anything about the servers.

  "Is reinstall several times on the same hardware ok?

  Yes. The servers are not different here: it uses the same activation mechanism.

• Error activation product key has been used already on Windows Server 2012.

  Original title: Activation error

  Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change

  Try the phone activation, you may have to do during the week:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Windows Server 2012 stuck at startup when running on top of KVM with active regrouping of CPU

  Hi all

  We observe an interesting problem when running Windows Server 2012 on top of KVM to multiple processors.

  When the collection of the CPU is disabled, Windows starts and works very well.

  When the grouping of CPU is activated by:

  bcdedit /groupaware on
  bcdedit /groupsize 2

  Windows hangs at startup while displaying a black screen with logo and won round progress indicator.

  We have produced the crash dump by injection of interruption NMI via QEMU/KVM debugging facilities, the look of stacks of appeal as follows:

  0: kd > ~ 0
  0: kd > kv
  Child-SP RetAddr: Args to child: call Site
  ' fffff803 ' 95645 c 08 fffff803 ' 941828de: 00000000'00000080 00000000' 004f4454 00000000'00000000 00000000'00000000: nt! KeBugCheckEx
  ' fffff803 ' 95645 c 10 fffff803 ' 93b66c09: 00000001' fffff803 00000000 ' 94196030 00000000 00000000' fffffa80' 05654968: hal! HalBugCheckSystem + 0x9a
  ' fffff803 ' 95645 c 50 fffff803' 94183204: 00000000 ' 000006 c 0 fffff803 ' 95645e30 fffff803 93 d 03100 fffff803'94196030: nt! WheaReportHwError + 0 x 249
  fffff803 '95645cb0 fffff803' 93be17a7: fffff803 '95645e70 00000000'00000010 00000000'80000005 fffff803' 93a2227d: hal! HalHandleNMI + 0 x 150
  fffff803 '95645ce0 fffff803' 93a84d02: 00000000' 32f7fc10 fffff803'95645ef0 00000000 00000000' fffff803 93 d 03180: nt! : FNODOBFM: 'string' + 0x13d6d
  ' fffff803 ' 95645 30 fffff803 d ' 93a84b73: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KxNmiInterrupt + 0 x 82
  ' fffff803 '95645e70 fffff803' 93abb0cb: 00000000 ' 00000000 fffff880 ' 0315efb8 00000000'00001000 00000000'00000000: nt! KiNmiInterrupt + 0 x 173 (TrapFrame @ fffff803'95645e70)
  fffff880 '0315eab0 fffff803' 93b0191b: 00000000'00000000 00000000'00000000 fffff880 '0315f200 fffff803' b 9417, 291: nt! KeFlushMultipleRangeTb + 0x3c0
  fffff880 '0315ecb0 fffff880' 01709b 45: fffffa80 '018a 7040 00000000' 0f0049ed fffff880' 0315f200 00000000' 00000000: nt! MmSetAddressRangeModified + 0x14b
  fffff880 '0315edb0 fffff880' 0170a 471: fffff8a0 '00ba0010 00000000' 0f004b81 00000000'00000001 00000000'00000500: Ntfs! LfsFlushLfcb + 0xa55
  fffff880 '0315efc0 fffff803' 93ac8df5: fffff880'0315f160 fffffa80 '0187a6a8 00000000 00000000' fffffa80' 05621b 80: Ntfs! LfsFlushLfcbCallout + 0 x 25
  fffff880 '0315eff0 fffff803' 93ac9d85: fffff880 '0170a44c fffff880' 0315f160 00000000 00000000' fffff803 93 d 03180: nt! KeExpandKernelStackAndCalloutInternal + 0xe5
  "fffff880 '0315f0f0 fffff880' 0170 has 434: 00000000'0000000 fffff803 ' 93 d d 03180 fffff803 93 d 03180 fffffa80 ' 018a 7040: nt! KeExpandKernelStackAndCalloutEx + 0 x 25
  "fffff880 '0315f130 fffff880' 017cbe9b: 00000000 ' fffff8a0 00000000 '00ba0010 fffff880' 0315f200 fffff8a0 ' 00b 18901: Ntfs! LfsFlushLfcbOnNewStack + 0 x 50
  fffff880 '0315f190 fffff880' 017c8f75: fffff8a0 '00ba0010 00000000' 0f004b81 fffff880 '0315f480 fffff8a0' 00b 18950: Ntfs! LfsFlushToLsnPriv + 0x13f
  fffff880 '0315f230 fffff880' 017c851f: fffff8a0 '00ba0010 fffff8a0' 00ba0010 fffffa80'057 c 2480 00000000'00000062: Ntfs! LfsWriteLfsRestart + 0 x 145
  fffff880'0315f290 fffff880'017 c 6083: fffff8a0'00b98c10 fffff880 '00000070 fffff880' 00002102 00000000 00000000': Ntfs! LfsWriteRestartArea + 0x15f
  "fffff880'0315f3d0 fffff880'017 c 9889: 00000000 ' 00000000 fffff880 ' 0315fa90 00000000'00000000 00000000'00000000: Ntfs! NtfsCheckpointVolume + 0x6f3
  fffff880 '0315f920 fffff880' 017c57eb: fffff880 '0315fa90 fffff880' 0315fa90 fffffa80'057 c 2188 00000000 00000000': Ntfs! NtfsCheckpointAllVolumesWorker + 0x61
  "fffff880 '0315f970 fffff880' 017c954c: fffff880'0315fa90 00000000 00000000' fffff880 ' 017 c 9828 fffff880 ' 0315fa40: Ntfs! NtfsForEachVcb + 0x1bb
  fffff880 '0315fa10 fffff803' 93ac0391: fffffa80 '018-7040 fffff880' 0175d6d8 fffff803 93 c 91080 fffff803 93 c 91000: Ntfs! NtfsCheckpointAllVolumes + 0x12c
  fffff880 '0315fcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803 '93ac0250 fffffa80' 018a 7040: nt! ExpWorkerThread + 0 x 142
  fffff880 '0315fd50 fffff803' 93a6ddd6: fffff803 93 d 03180 fffffa80 '018-7040 fffffa80' 018bd040 fffffa80'01897040: nt! PspSystemThreadStartup + 0 x 59
  "fffff880'0315fda0 00000000' 00000000: fffff880 ' 03160000 fffff880 ' 0315a 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
  0: kd > ~ 1
  1: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '031ce940 fffff803' 93a5319b: 00000000 00000000' fffff880'04171000 00000000 '80000002 00000000' 00000001: nt! KiIpiSendRequestEx + 0 x 166
  fffff880 '031ce990 fffff803' 93a4d364: 00000000'00000040 00000000'00000040 fffff880 '031cebb0 ffffffff' ffffffff: nt! KeFlushSingleTb + 0x11b
  "fffff880 '031ceab0 fffff803' 93a4e9fc: 00000000 fffffa80'20000000'd 250 0178 00000000' 0007d9b7 2aaaaaaa ' aaaaaaab: nt! MiStealPage + 0 x 914
  fffff880 '031cee60 fffff803' 93a4ff87: 00000000' ffffffff 00000000' 0007d9b8 00000000'00000103 20000000' fffff803: nt! MiClaimPhysicalRun + 0x1fc
  fffff880 '031ceee0 fffff803' 93e8ea59: fffff880 '031cf2e9 00000000 00000005' fffff880' 0198f000 fffff8a0'00015470: nt! MiFindContiguousPages + 0 x 337
  fffff880 '031cf030 fffff803' 93e8f0ec: 00000000' 7d9b8963 00000000' 0007d9b8 00000000 00000000' fffff8a0'00003000: nt! MiAllocateDriverPage + 0 x 49
  fffff880 '031cf0a0 fffff803' 93e9eafb: 00000000 00000000' fffff880 '031cf2e9 00000000 00000000' fffff6fc' 4000cc78: nt! MiLoadImageSection + 0x23c
  fffff880 '031cf230 fffff803' 93e9f43e: fffff880'031cf390 00000000'00000000 00000000'00000001 00000000'00000000: nt! MmLoadSystemImage + 0x1c3
  fffff880 '031cf340 fffff803' 93e9979c: fffff880 00000000'00000000 00000000'00000000 ' 031cf860 00000000'00000003: nt! IopLoadDriver + 0x2ca
  fffff880 '031cf610 fffff803' 93e97fb6: fffff8a0 '00d04e00 fffff880' 0097b 340 00000000'00000000 00000000'00000000: nt! PipCallDriverAddDeviceQueryRoutine + 0x22c
  fffff880 '031cf730 fffff803' 93e95bc0: 00000000 00000000' fffff880'00000002 00000000 '00000000 00000000' 000007ff: nt! PnpCallDriverQueryServiceHelper + 0x13e
  "fffff880 '031cf7b0 fffff803' 93e9611e: fffffa80 ' 01892010 fffff880 ' 031cfa40 fffffa80 ' 01887670 fffffa80'd 018 4700: nt! PipCallDriverAddDevice + 0x400
  fffff880 '031cf940 fffff803' 93f09c07: fffff803 '93a 91700 00000000'00000001 00000000'00000000 fffff803' 93d90a52: nt! PipProcessDevNodeTree + 0x1ca
  fffff880 '031cfbc0 fffff803' 93b1381f: fffff803 00000001'00000003 00000000'00000000 ' 93ce06e0 00000000' 00000000: nt! PiProcessStartSystemDevices + 0 x 87
  fffff880 '031cfc10 fffff803' 93ac0391: fffffa80 ' 01898040 fffff803 '93b134bc fffff803' 93ce06e0 fffffa80' 0189 c 600: nt! PnpDeviceActionWorker + 0 x 363
  fffff880 '031cfcc0 fffff803' 93a2f521: 00000000'00000000 00000000'00000080 fffff803'93ac0250 fffffa80'01898040: nt! ExpWorkerThread + 0 x 142
  fffff880 '031cfd50 fffff803' 93a6ddd6: fffff880 ' 02a 15180 fffffa80 ' 01898040 fffffa80'd 0188 040 fffffa80' 01897040: nt! PspSystemThreadStartup + 0 x 59
  "fffff880'031cfda0 00000000' 00000000: fffff880 ' 031 d 0000 fffff880 ' 031ca 000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16
  7: kd > ~ 2
  2: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '02aafa08 fffff803' 93b4e12a: fffff880 '00000006 fffff880' 00000003 fffff880 '02-92140 fffff803' 93b4e9e4: hal! HalProcessorIdle + 0xf
  fffff880 '02aafa10 fffff803' 93ab69a0: fffff880 '02a8b5c8 00000000' 05f5e100 00000000'00000000 00000000'00000000: nt! PpmIdleDefaultExecute + 0xa
  fffff880 '02aafa40 fffff803' 93ab53c0: 00000000 00000000' 0000040c 0000040'c fffff880 '02aafca8 fffff880' 02aafcb0: nt! PpmIdleExecuteTransition + 0x47f
  fffff880 '02aafc60 fffff803' 93ab354c: fffff880'02 has 86180 fffff880 '02a 86180 00000000 00000000' fffff880' 02a 92140: nt! PoIdle + 0x1e0
  fffff880'02aafda0 00000000' 00000000: fffff880 '02ab0000 fffff880' 02aaa000 00000000'00000000 00000000'00000000: nt! KiIdleLoop + 0x2c
  2: kd > ~ 3

  There are always two or more CPUs stuck in KeFlush...() functions dealing with IPIs. 
  
  The problem looks like interrupt loss during IPI-ALL-BUT-SELF dispatching, we tried to track possible problems in KVM code that may lead to an issue like this but found nothing so far.The issue looks even more interesting taking into consideration that as far as we know CPU grouping is SW-only feature that doesn't have real effect on hardware.We will be grateful for any idea that could help to resolve the problem.Thanks in advance!P.S. Kernel crash dump is available at https://www.dropbox.com/s/07qb6wz9nacwhxn/MEMORY.DMP.zip?dl=0
  

  KV

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  If you pt a link here I want a few resources for the thread on TN

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Server 2012 BEX problem

  Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...

  Problem signature:
    Problem Event Name:   BEX
    Application Name: Tibia.exe
    Application Version:  10.9.3.0
    Application Timestamp:    5726e97b
    Fault Module Name:    Tibia.exe
    Fault Module Version: 10.9.3.0
    Fault Module Timestamp:   5726e97b
    Exception Offset: 00362276
    Exception Code:   c0000409
    Exception Data:   00000007
    OS Version:   6.3.9600.2.0.0.16.7
    Locale ID:    1033
    Additional Information 1: e6cc
    Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b
    Additional Information 3: 996a
    Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d
  
  Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=280262
  
  If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
  

  Can U help me?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

  Hi all

  Please could you help me with the following text:

  After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.

  Thank you

  Ivo

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2

  Hello Experts,

  We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.

  It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL

  MDG action plan-
  

  Install Java 1.7.

  Installation of WebLogic Server 10.3.6.

  Patch WebLogic Server with Patch 16844206 .

  Perform a software installation of OBIEE 11.1.1.9.0.

  Configure OBIEE

  
  

  Following the same thing we did it-

  (a) installed weblogic 10.3.6

  (b) Dowbloaded the patch and ran GUI and command line.

  
  

  1. When was held from the GUI

  Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.

  However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)

  http://www.use.com/FonC8

  2. When ran from command line-

  
  

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose

  Exception in thread "Main Thread" means

  D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install

  Exception in thread "Main Thread" means

  
  

  Any solution?

  
  

  Thank you very much

  Benoit
  

  Hi all

  According to Oracle advises has resolved it as follows.

  It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd

  MEM_ARGS =-Xms256m-Xmx512m set

  TO

  Set MEM_ARGS =-Xms1024m-Xmx1024m

  Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.

  Thank you very much

  Benoit

• Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments

  Hi all!

  I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspx

  But I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
  Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
  KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
  KdInitStatus value is "c00000b5".

  I tried:
  -change of hardware to 9 version
  -change the comments to e1000 Ethernet card
  -disable the DHCP (debugger comments must use APIPA)
  -change the type of connection (bridge NAT, host-only)

  and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
  But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.

  Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?

  Thank you!

  Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos

• Cf11 install problem on WIndows server 2012 R2

  We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine.  cfm files will not upwards in the default directory, but IIS displays htm thin files.  CF Administrator works fine.

  Web server configuration tool will only show "None" in the box of the IIS Web Site.  The usual CGI, APS, etc. were installed on IIS.  IIS and CF11 have in fact been re-installed.  Manual run wsconfig.exe shows no errors.

  The problem is that any call to a model cfm results an error (html pages serve very well):

  Error HTTP 500.0 - internal server error

  The page cannot be displayed because an internal server error has occurred.

  Detailed error information:

  Module IsapiModule

  Notification ExecuteRequestHandler

  Manager cfmHandler

  Error 0x8007007f

  URL requested http://localhost: 80 / default.cfm

  Physical path C:\inetpub\wwwroot\default.cfm

  Can anyone give suggestions for troubleshooting?  No newspaper appears to show all information that helps.

  Solved the problem... it is not a problem of one CF but and especially an IIS problem...

  (1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.

  (2) restart

  (3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development

  (4) restart IIS and CF

  (5) Web Server Config set to 'all '.

  60 restart IIS and CF

  The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.