system32\sshnas.dlll?

Similar Questions

• C:\WINDOWS\System32\danim32.dlll not a windows valid image message at startup

  HELP, I'M ON CLICKING
  When windows starts, it comes up with a box and in it reads DLLC:\WINDOWS\System32\danim32.dlll not a windows image is valid. On the top of this message on the right hand side of the box has a path of file name, bas.exe bad image.
  Please help me, I'm so sick of clicking on these boxes to get rid of them. There are only a few of them as well quiet.

  Thank you

  Dorothy salvation,

  There is a very good chance that you are infected with something, and we need to deal with this.

  First of all, update and run a full scan with any security software you use and delete everything it finds.  See if that helps.

  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  Whether you are or not, if you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  SE not in North America or not using MSE:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  When the system is clean, you can have damage to be repaired to restore some files from the system (or reset) - and there may be more damage but we have the system clean before we can deal with that, or he'll just continue to occur.  Remove the infections might also solve problems as well (if we're lucky) or experts offering you assistance may be able to help with that as well.

  Good luck!

• Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

  Error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

  Hello

  Step 1: sshnas.dll is a component of spyware or malware.  Online virus and malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: You can also see the question in the clean boot state.

• When Vista starts, getting the error "Error loading C:\Windows\system32\sshnas.dll this module specific point is not found"

  When I start my PC it opens as soon as my desktop appears on the screen, error loading C:\Windows\system32\sshnas.dll the specified module could not be found.  How can I fix it?
  * original title - need HELP, Windows System 32 error *.

  Hello

  who is / was malware or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How to remove the popup - medium c:windows\system32\sshnas.dll

  What does error loading c:windows\system32\sshnas.dll? It is a pop-up box when I turn on my computer...

  original title: error loading c:windows\system32\sshnas.dll wants to say what and how do I clear this pop up?

  The name that is like a virus. It seems to be deleted but thr order
  Initially, only it doesn't have. Type msconfig in the start search and look for this entry
  in the Startup tab.

  --
  ..
  --
  "ailwj7" wrote in message news: 77313607-9ed8-4e1a-93e7-abb82e3725c9...
  > What means error loading c:windows\system32\sshnas.dll? It is a pop
  > box when I turn on my computer...
  >

• RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

  When I start windows Vista, I get the error message:

  RunDLL
  Error loading C:\windows\system32\sshnas.dll

  The process cannot access the file because it is being used by another process.

  How can I fix?

  Hello

  It is the result of malware, then do a very thorough check and when the system is
  clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have this RunDLL error. There was a problem starting O:\Windows\system32\sshnas.dll the specified module could not be found.

  I don't see any change, but it's annoying.

  This file is a Trojan horse. The Trojan horse is set to run at startup but the file is missing now and that's why you get the error. You have removed the malware, or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan with your antivirus with updated definitions and a good software like MalwareBytes antimalware program ' Antimalware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Once you are sure that your computer is now clean, rest boot entry you can delete:

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista/Win7 it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Lack of C:\windows\system32\sshnas21.dll - error message

  I get this error at startup: c:\windows\system32\sshnas21.dll is missing or damaged.  I don't ' think I have a virus, I had run a check using business AVG and nothing was found last week.  I am running again this am.  Last night I ran a registry cleaner free trying to fix my Outlook email in question and said the vacuum we found thousands of entries I did not buy the software so that it ran and cleaned only a few entries. He was ParetoLogic pc health advisor. This morning my sidebar does not work.   My OS is Vista.  I did a search on the problem of dll, it responds to me told to delete all occurrences of sshnas21 of regedit.  I opened Regedit it registered 'My computer' with 4 or 5 entries under it.  I went to edit/search/trying to find a sshnas but everything came right I wasn't sure if I should delete all or what the devil at this point.  My email still will not let me click on links within an email or a word document... my side bar does not, now, I have a msg of error at startup... Help would be greatly appreciated.

  I found the answer in another forum... http://en.kioskea.NET/forum/affich-286191-error-loading-c-Windows-System32-sshnas21-DL Thank you commentcamarche! the fixed perfectly.

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• Satellite A100-207 - \windows\system32\config\system is corrupt

  Hello

  Can someone help me with the following problem. With regard to a Toshiba Satellite A100-207 with windows XP media edition

  When starting the laptop hangs with error * \windows\system32\config\system is corrupt *.

  This article is the closest to the problem http://support.microsoft.com/kb/307545. but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  I have lost the disc of recovery (recently).
  But were able to boot the laptop from USB using a cutter (lite) version of windows.

  The scene in the article copy c:\windows\repair\system c:\windows\system32\config\system fails because the file does not exist (the other files do however).

  In this folder there is a system.bak, this would solve the problems like the laptop boots windows logo screen then after 5 minutes restarts and just go around and around a certain extent.

  There is also a file system.sav in the folder windows\system32\config using this all goes someway to to solve the problem, the laptop restarts and resumes product set-up with off course fails has so I don't have the recovery disk.

  I would be grateful if someone could help with the problem

  Regards Garry

  > but the warning in the article on the point is not to use with circumspect OEM on more facilities of he made me.

  You can ignore this warning, you have no other choice than to try to fix this system following the article in the Microsoft Knowledge base.

  But to be honest, I doubt that the system would run smoothly after this work around.

  I would recommend the new installation of the OS.
  If you don t have a Toshiba Recovery disk, you can use a Microsoft Disk to reinstall the system. Essential drivers are available Toshiba driver Web site.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• Satellite Pro A300 - System32\hal.dll file is corrupted or missing

  I have a Toshiba Satellite Pro A300, which says that the System32\hal.dll file is missing or corrupt.

  Is it possible to repair the file by a recovery by the laptop itself, or do I have to get a copy of Windows Vista to start over and do it this way?

  Hoping to get some possible answers to what to do.

  Thanks Christian

  Hello

  I read that some discussions in different forums and in most cases the new OS installation may solve this problem. The HAL.dll in place in C:\Windows\system32 then maybe you could solve this problem in copy this file from the Vista CD in this folder

  You could start the unit by using a Live CD (linux or windows lice CD called PartBe or WinPE)
  But the easiest solution would be to the recovery procedure

• c:\windows\system32\fltlib.dll seems to be corrupted

  My C:\windows\system32\fltlib.dll seems to be corrupted. This prevents my Panda Antivirus to start a service and that the Panda.

  I spoke with tech support Panda as well, but we have not found a solution.
  Now I wonder, how can I retrieve the original dll-file and save it.

  Can I copy from another PC (not Toshiba) and it works on my laptop?
  I hate the idea of recovering the Vista set to its original.

  Please advice,
  ESA Viitala

  > Can I copy from another PC (not Toshiba) and it works on my laptop?
  Hmm don't think this would work I would recommend to set the operating system to start point of time using system restore point or to use the recovery disk to reinstall the OS on the laptop and the laptop back to factory settings.

• Root Windows satellite 5200 701 system32/hal.dll missing

  My Toshiba s5200 701 crashed today.

  Windows displays this error:

  + windows didn't start because the following file is missing or corrupt: windows root system32 / hal.dll +.
  + Please re install. +

  First of all, this Toshiba is a European model and I live in the USA.
  Second, the model is old.
  Third, I don't have the XP CD reinstal the OS.

  I don't know if it's worth buying a new professional XP for this computer.

  All ideas, suggestions. Please notify.

  Jose

  Hello

  I read on issues such as
  You need to reinstall the OS, but it would also be possible that this error is related to the defective HARD and/or RAM disk.
  Many uses had this error again after the new installation of the OS and in individual cases the RAM or the HARD drive has been affected as well.

  What to say; It s your decision what you want to do... I recommend reinstall Win XP once more to verify if this question relates only to lack hal.dll in the system32 folder.
  However the Win XP license is cheap, because Win 7 is on the market and no one wants to use 'old' OS which will be more in the coming years...

• Satellite A300 - w c:\windows\system32\rpcnet.dll and rpcnet.exe recognized as Trojans

  Hello

  while I was scene analysis antivirus on the laptop Satellite A300-15 b, my software recognized w c:\windows\system32\rpcnet.dll and rpcnet.exe as Trojans and deleted. These files are essential?
  How can I get back them? If someone of you cannot answer, I'd appreciate any help.

  Hemoth

  What anti-virus software are you using and have you updated to the latest list of detection of virus/trojan?
  To retrieve these files, you can use the windows repair console, which can be entered by pressing the F8 key before the windows operating system starts.
  Will take you to a list where you repair or somehow mode called option.

  If this does not work, you can try using recovery media.