SystemBuild

Similar Questions

• SystemBuild SuperBlocks

  Hello

  Why only discrete SuperBlocks (and why not continuous for example) can have an enable signal? Is it possible to enable or disable a continuous superblock?

  Thank you
  Yevgeni

  Because continuous models cannot have discontinuities in the model. Integrators need continuous signals.

  It is not possible to turn a continuous superblock.

  Dirk Mol

  MATRIXx R & D

• ModusLink Vista upgrade is free or not free?

  I just bought the laptop A100-906 with Windows XP Home Edition. I understand I can be upgraded to Windows Vista. And, as I understand it, for free.

  But while I visit the site Microsoft Upgrade that I saw a price of article 95, 47USD without shipping and handling for Grand Vista Home Premium.

  Am I have to pay, or I have to just make an order, send to [email protected] and Toshiba will pay?

  So, I want to say this upgrade is free or Toshiba gives just a discount?

  Hej,

  you are in the same situation, as if I were.

  1: updates are only free from XP PRO to Vista Business or XP MCE, Vista Home Premium.
  2: updates XP Home cost. Even from XP Home to Vista Home Basic, you will need to pay a lot.

  I ordered as you want to make Vista Home Premium for 98, xx. Right now I'm happy that I could cancel the order. I really advice you not to order through Moduslink. The company was founded just for the upgrade. You can hardly reach them by e-mail. The only thing that works is letter or by fax.

  And in the end: you get just an upgrade! So I kindly advice you don't not to order here. Instead, the order in your Favorites online shop a Windows Vista Home Premium SystemBuilder / OEM product. I ordered as well for 99,- so it is not even one Euro more then the upgrade. You get a full version and I got it in one day. I waited for more than 6 weeks and nothing happenend on ModusLink.

  BR
  Snipe of the marshes

• Who has already received Vista upgrade express KIT?

  I get confused just apply an or not. -What is boxed as a commercial Version?

  It is an upgrade, you must have installed XP before installing Vista of the means. You can not do a clean install. There are ways to do it, but it's not official. And you are allowed to use it on THIS computer. Depending on how much you have to pay I would advice to buy a version of systembuilder (OEM) on your own. I cancelled my order today of moduslink and ordered on my own. When you order by moduslink you must wait several weeks and experience many problems during the upgrade process.

• Satellite A300-1QD - start some time and memory errors won't test

  Hello

  I have some real problems with a brand new satellite A300 1QD.
  After update of Windows Vista Home Premium 64-bit (Service Pack2) Vista unbootable. After the reboot of forst, it showed a message:

  File: \windows\system32\winload.exe
  Status: 0xc0000221
  Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

  AprΦs the dΘmarrage of the original CD Vista Home Premium or the Systembuilder OEM another error appeared:

  Error: 0xc000000f
  Missing or damaged \Windows\system32\winload.exe

  Does not even work by pressing F8 during startup. I have a chance to start even a repair because there is no option that I could choose.

  After a few resets the A300 seems to have some problems.
  A few times the display does not start, after the other it does not, start by hanging up during the automatic test etc.
  I have reset the BIOS by default Options, but it does not help.

  The A300 are one week. Am I allowed to remove a RAM bar without losing the warranty?
  I have read that sometimes it helps. I was able to do a memtest software vista. It is said that some hardware conflicts appeared.

  I am desprate, please help.

  EDIT:
  I did another test memory with linux 64 bit (openSUSE 11.1) and many erros occurred.
  What can I do now? The laptop is a present fpr my girlfriend Monday 15. Can I order other RAM and return that broke with a Numbor RMA or something?

  EDIT2:
  I recognized, that sometimes, when I start the laptop, the power led is the lightning to the top, but the satellite logo in the left corner remains dark.

  Oh, by the way, excuse my English, I hope that I can make myself clear enough that you can help me ^^

  I guess that you have solved this issue thank you for your comments mate!

• Symbol (s) W * not found

  What does this warning mean?

  Load file = "mysbdfile.sbd".

  Symbol (s) W * not found
  "load" file = "c:\mysbdfile.sbd".

  mysbdfile. SBD is a Signal to build with blocks of user Code.

  Kind regards

  Andreas

  I'll post the answer that I have help, if someone would like to know

  > The ' * W * no symbol (s) found "is just a warning, since the opening and order record wait variables in the file.
  > The warning is to tell you that nothing has been changed in Xmath.
  > To remove the warning, add {version} at the end of the open or load command to indicate that you want to load data from SystemBuild.

  Andreas

• How can I change the properties of Xmath block?

  I want to change some properties of block Xmath, for example to change the name of a constant block. I tried something like

  Constant1.name = 'new name ';

  Can someone help me?

  Thank you

  Yevgeni

  You can use the SBA (SystemBuild Access, see Chapter 7 of the guide SystemBuild) command of routine modifyblock to change any SystemBuild

  Block property. All the created blocks have a block id that must be specified in the modifyblock command.

  For example:

  modifyblock 2, {name = "myblock", color = 2, size = [100 100]}

  or to create a gain block

  createblock 'gain', {win = 2.5, name = "accelConstant"}

  to retrieve the id of the block of a created block, pass a variable set to zero, createblock will set the variable to the id of the created block

  MyID = 0

  createblock 'dead zone', {id = myid}

  modifyblock myid, {color = 1, input = 2}

  You can also get properties for a block by using the queryblock command.

  [t = c = color, location, t = blocktype threshold] = queryblock (myid)

  See Chapter 7 of the Guide SystemBuild users for more details and orders

• How can I reactivate Windows XP?

  Got my PC from file system damaged, but now windows don't be loading not unless I have Windows XP automatic internett connecting to microsoft does nothing. How can I reactivate Windows XP Pro?

  Hello Raphael,.

  Christmas sent me to see if I had something that might help :-)

  My understanding of your situation, it's that your computer has a file system corrupted, if you used the manufacturer's recovery process to recover your computer if you "out-of-the-box".  I also noticed that you mentioned that recovery has given you the option has not your personal files in a place called "my old file Structures." Unfortunately, the recovery isn't going smoothly 100% and you encounter a problem of activation.

  The best tour I have up my sleeve is trying to "rearm" Windows Product Activation XP, which if it works will provide you with a grace period of 30 days, during which you can try to recover and backup your files from the old file Structure My, their credit on another storage (like external HDD or flash drives). Once your data is safe, then you can try to get another and hope this goes more smoothly this time. If this is not the case, your next step would be to contact the manufacturer to acquire the system disks required to run CD/DVD recovery rather than the recovery partition on the hard drive of your computer.

  If the computer can be started in a safe mode command prompt, run this option to rearm activation XP:

  Rundll32.exe syssetup, SetupOobeBnk

  The command must be typed exacly as above with space, caps, and comma.  Restart, and if it works, you will be able to log in normal mode (as opposed to safe mode) and will be in the 30-day activation grace period.

  Assuming that works, save your data, and then try the recovery again.  You will want to visit the support pages and community forum hosted by the manufacturer of your computer to search and see if the seeds of recovery are common for your make and model of computer - if yes, it is likely to be a fix for what you can implement.

  If this does not work, then your next task is to use an operating system off-line such as BartPE, Ultimate Boot CD, Knoppix, etc., to save your data from the saved location.  Once the data is turned off the computer and the safe, you can use the manufacturer's recovery disks (or disc OEM/systembuilder Microsoft at the generic address) to make a good clean install of Windows.

  Good luck! :-)

• Lack of recovery of the XP HE CD

  How to get the recovery CD you contacted Gateway and the system is out of warranty, so the CDs are not available. The machine died with a total failure of the hard drive. I have the license key on the bottom of the PC and a new drive ready to install with no operating system.

  Any suggestions?

  Thank you...

  Hello Midlo M.

  Third parties would be my first try, because the original recovery disks are better for average users more than just a generic solution IMO.  Try auction sites online (but attention looking for the real gateway printed discs for your model vs general initialization and repair or burnt disks), or try to www.restoredsiks.com

  If no joy anywhere on it, get hands on a real Microsoft hologrammed XP Home Edition installation CD, BUT the CD must have "for distribution with a new pc only" engraved in the hologram in the upper left quadrant.  It is an OEM/systembuilder disc, which will work with the product key on the certificate of authenticity (CoA) on th computer.  Other disks that are full retail, upgrade retail or volume will not accept the product key on the certificate of authenticity.  For security reasons, do not use all burned disks or disk images downloaded from anywhere - these are likely chock full of malware.

  Install your new HARD drive, start the computer, and make sure that the disc is recognized at its full capacity of configuration of the BIOS of the computer.  If this is not the case, a BIOS update may be necessary.

  Then insert the restore disc real bridge or genuine Microsoft disk and restart.  Choose an option to boot from the CD.  If a gateway recovery disc, do the bridge on their website for the execution of a recovery.  If a Microsoft disc, follow the prompts to accept the EULA, do one or more new partitions on the HARD disk, format the partition you want to install Windows XP, then install XP it on that partition.  The installation program is running and request you a product key.  Use the one which concerns your CoA, NOT one supplied with the hologrammed installation disc.  More questions on computer names, etc.  Let him finish.

  After complete installation and reboot, DO NOT accept the prompt to automatically activate online (assuming that the installer has found and installed your network card).  Instead, choose Activate XP by phone.  The wizard displays a digit (IIRC) installation ID 54, then you will have to dial a phone number, you enter the Installation ID in the automated phone system.  At this point the system is you will give an activation ID 54 figure to enter Activation Wizard (activation of complement) or your application will be rejected.  If rejected, choose the option to speak directly with a representative of activation (offered only during normal hours of your country/region).  Explain to the living rep that your HARD drive is dead, gateway could not send you recovery disks if you had to use a real systembuilder hologrammed intallation disk as well as the cost of your computer's product key to reinstall Windows on the replaced HARD disk.  The rep should provide you with an activation code.

  Buy Office 2007 now, get Office 2010 free http://office2010.microsoft.com/en-us/tech-guarantee/microsoft-office-2010-technology-guarantee-FX101825695.aspx?CTT=97

• Installation of Windows XP Home Edition _ ~ No. CD__ ~ Yes produced Code__ ~ Yes CD or floppy disk bootable__ ~ original OS

  I want to install Windows on the computer, that I got from my grandmother, and yet I don't have the install CD for Windows XP Home edition... I have not however product code...

  Yes, I looked everywhere on the Microsoft Web site and cannot find a CD installation for my life... It's only commercials for Windows 7 and Vista... (Which I will NOT and CAN NOT afford), as well as service packs, but not the real [i] OPERATING SYSTEM INSTALLATION [/ i] I need...

  No, I don't want a pirated... version that's why I'm here in the first place... where the * I can find an edition of OS INSTALLATION CD [i] [/ i] for Windows XP Home Edition... I don't want to win. 7 OR Win. Vista... the computer is not yet able to execute even when... They both require too much CPU/ram...

  The computer is currently running Ubuntu (a Linux distro.) but with how old is the computer, he can't run most programs I would like to...

  [b] the only thing I need, is the DISC of INSTALLATION OS [i] [i] so I can re - install Windows on my computer... [/ b]

  Now where can I get one?

  (1) Yes it's retail...
  (2) I got from my grandmother , who got it years ago... and apparently could not find the disk win...

  I installed Ubuntu on it... The computer allows a parallel installation for my life, so it was a clean install... complete wipe/format and installation.

  Turns out it works better with Win XP, with only being able to support Opengl 1.8... Cannot run anything effectively with ubuntu on the computer except for internet browsers...

  The sticker key product or something else, says 'Windows XP Home Edition, HPQ'

  Hello rutofteaching,

  Because the certificate of authenticity (CoA) has "HPQ" on that, we know that it is a HP or Compaq computer.  Please contact HP/Compaq support to see if you can order a recovery disc for the computer.  If the original motherboard is still in the computer, it is always allowed to run Windows XP Home Edition HP/Compaq.

  Departure to this page by using HP/Compaq: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

  If none of the recovery discs are available from HP/Compaq, please try other suppliers such as www.restoredisks.com.

  In a pinch, you can borrow real Microsoft hologrammed XP Home installation disc a friend provided with licenses from Microsoft for XP Home Edition OEM/systembuilder/small manufacturer.  Installation using this CD and the product key located on CoA on your computer and NOT the product key provided with the CD. After installation, you must activate by telephone and NOT by an automatic online activation.

  As others have posted, there is nowhere on the Microsoft site that you can download an ISO file or equivalent for Windows XP Edition family.  You wouldn't use a downloaded disk even if you could find one elsewhere on the internet because they are probably packed full of malware, rootkits, and who knows what else - not what you want to infest your computer with. Good advice on all XP themes, visit the http://www.annoyances.org/exec/forum/winxp

• Blocked for use by Microsoft Windows 7 Ultimate activation

  I bought a brand new sealed copy of W7 Ultimate off ebay, I think it's on the Germany and I'm in the UKL and when I come to activate the installation I get the message of this product thr key is blocked for use by Microsoft, looking into the reason for this, that it is said that the product is not licensed for use in all of the countries How can I solve this problem and activate my windows?

  Thanks a lot for any help

  Mark

  Have you tried to restart by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.
  http://support.Microsoft.com/kb/950929/en-us

  There is some geographic Restrictions in some countries. Please see the following links for more information.

  Geographically limited Microsoft Software: how to say
  http://www.Microsoft.com/howtotell/geo/

  How to tell: FAQ
  http://www.Microsoft.com/howtotell/content.aspx?displaylang=en&PG=FAQ

  View Distribution Information territory
  http://www.Microsoft.com/howtotell/geo/SystemBuilder.aspx?displaylang=en

• VMware ESX 4.0.0 in connection mit Windows Server 2008R2 Datacenter (4cpu) - license

  Hallo zusammen!

  I have several questions zu obigem Sachverhalt und hope, dass mir von Euch helped werden kann.

  Wir haben einen host ESX (VMware ESX 4.0.0) den wir via vSphere von einem Windows Server aus, verwalten. Auf dem ESX host wollen wir nun start, die first VM (ins Leben zu find) zu installieren. ES sollen OS installed werden (. ser on W2K3 / W2K8 STD (R2), company / business,...).

  Wir haben also license so: 'Windows Datacenter 2008 R2 64 bit 4 CPU. After we die erste VM installed haben, wanted sharp wir mit dem Lizenzkey der Datacenter license aktivieren. Unfortunately works weder der 'Product Key', noch der 'Virtual Key'.

  WO ist mein Denkfehler? Wie die of ich lizenzsiere auf einem host ESX VM procedures meiner Datacenter license Windows-VM?

  Email ich einen KMS Server?

  Bitte um Hilfe - Danke und Grüße TIM

  Auf einem Windows-Server further

  Ich habe einen Server Hello understand before mit 4-Prozessoren (mit neuankömmlinge bis zu 6 carrots?) und eine MS Datacenter 2008R2 as 4 processors so.

  Wenn nun auf dem vShere Installierst werden die Datacenterlizenzen dem host "OS are" Host the kannst und so many different Windows Server verschiedener color installieren, wie die Maschine these.

  (Die dabei "freiwerdenden licenses können as physical system recycled werden...)

  Die Lizensierung participations eher als "Zuweisung" - stell dir vor, die of the DC licenses klebst an den Server und damit Maschine lizensiert ist die mit data center.

  The Add Installation Aktivierung paper - die Zuweisung hands oder keine.

  Bei einer Aktivierung eines W2K8 STD. servers add to the (ublicherweise) einen VLC (VolumeLizenzKey) der eine unlimitierte Aktivierung allows.

  Wenn nun keinen VLC As, so wende Dich an den suppliers der DatacenterLizenz oder direkt from MS. Mit den entsprechenden Lizenzpaieren und Kaufbelegen solltest VLC key bekommen die.

  VIELLEICHT kannst noch something konkreter werden, um welche Art DC license are all und wie bisher deine Server aktiviert Hat sich (OEM, VLC, detail mit Select vertrag, SystemBuilder...) - eine Systembuilderlizenz ACE falls.

  BTW. a hindert dich daran, every Server STD als eines virtual system einen Datacenter zu installieren? OB deine nun auch STD oder doch keine Rolle spielt so DC application.

  Wenn einen planned Server ACE, den draufklonst oder geckoos193, der dann neu aktiviert werden will ists auch kein problem.

  Einfach aktivieren und ggf. uber die Aktivierung go book.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Also on 11-08-2011.

  http://www.Microsoft.com/windowsserver2008/en/us/downgrade-TC.aspx

  Post edited by: newmy