Windows Server 2008 R2 SP1 Standard Running IIS Version 7.5.7600.16385

Similar Questions

• Windows Server 2008 R2 SP1 Standard not supported in UM 4?

  I am trying to scan a server that is running an operating system in the subject for the first time line.  I'm new to Update Manager.  I read that the first time that a scan is initialted the client Update agent Manager installs.  After you try to run a manual the following error appears in the status column of recent tasks: the operation is not supported on the object. ' I read online that it might be the version of the operating system.  Is this really the case?

  According to the relase notes it is not supported

  http://www.VMware.com/support/vSphere4/doc/vsp_vum_41u1_rel_notes.html

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Range of printers PhotoSmart c4780 HP; Windows Server 2008 R2 SP1

  Everyone found a way to install this printer on a running Windows Server 2008 R2 SP1 print server, or a work-around pilot?

  Hi JamesRMarvin,

  Follow the instructions below to install the driver for 990c for printing on the server.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmar C4780 using this driver. I would like to know if you have the same problem?

• Windows Server 2008 R2 SP1 AHCI RAID change

  Hello

  OS: Windows Server 2008 R2 SP1
  Storage: 1 x SSD
  Tip: Supermicro X9SRW-f

  Currently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.

  Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.

  I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.

  There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
  iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
  iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)

  How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?

  * Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

  Hi, I want to install the Windows Server 2008 R2 SP1 180 trial version. I downloaded from:
  http://TechNet.Microsoft.com/en-us/evalcenter/ee175713.aspx

  but I don't have the key. How to register and get the key.

  Another question:
  Is it possible to install Windows Server 2008 R2 SP1 180 trial version as a virtual server on my Windows 7 Home premium version? If Yes, how can I do it, because it seems Windows 7 Home premium version do not support Windows Server 2008 R2 with SP1 as machine visualization.

  Thank you.

  Assessment of any version of the software Windows Server 2008 R2 SP1 does not require entering a product key.  Thus, no product key is issued.

  Q. "is it possible to install the Windows Server 2008 R2 with SP1 180 day trial version as a virtual server on my Windows 7 Home premium version?

  A. no, it is not supported.

• T330 incompatibility of Windows Server 2008 R2 SP1 install USB 3.0

  The T330 has no native support for USB 2.0.  Installation of Windows Server 2008 R2 SP1 media has no native support of USB 3.0. Installation of the OS then the mouse and keyboard do not work.   I tried to inject the drivers USB 3.0 into Server 2008 Windows ISO (see: https://www.dell.com/support/article/us/en/04/SLN300618/en ).   Injection in ISO works fine and it solved the problem of no keyboard or mouse to begin the installation of the OS

  BUT once the base OS is installed and you come to the first post install screen (when it is now booting from the hard drive) to change the password and proceed with the installation, the keyboard and the mouse are again in opening.    My best guess is that the USB 3.0 drivers do not get installed on the hard disk.  I tried to start again and reinstall the operating system but same result.  The creation of the ISO by KB post above was clean and efficient.  No errors.

  "I saw a different Dell ' Faq ' recommend to disable USB 3.0 is the BIOS OF THE system.  On this current - nine T330 - model, BIOS update, there is no BIOS setting/option.

  Looking for a solution.   Had an old PCI USB 2.0 card, but the machine has no PCI ports.  Consider trying a USB 2.0 PCIE card.

  What is amazing, is that Dell sells the T330 No. USB 2.0 compatible - installation of SP1 W2008R2 difficult and perhaps impossible.  NOTE: this OS is a Dell supported OS for the T330 I would not have bought if it wasn't supposed to be supported (I am restoring a DC with this OS due to a mother failed on a server of EP).

  Solved: Bought a PCIE USB 2.0 card. This works.  Model is Sonnet Allegro USB PCIe (2.0).

  If I had known, I would have just bought the thing and ignored the whole pilot injection exercise.

• Installation of Windows Server 2008 R2 SP1 problems

  Since the recent release of Windows Server 2008 R2 SP1, I have since downloaded the ISO from Microsoft (SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO) and tried to install it on my sandbox (ESXi 4.1.0 260247) and I will have questions.

  The problem is that Windows does not have a driver for the SCSI controller device.  I tried to change the type of "LSI Logic SAS' to 'LSI Logic" parallel "and it does not solve the problem.  I tried to download a Windows 2008 LSI SAS of LSI driver directly (http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html) and use it, and still have had no luck.

  I was wondering if anyone has had any success in installing Windows 2008 R2 SP1 on ESX or ESXi 4.0 or 4.1?

  

  See you soon,.

  Ken

  Hi Ken

  It is the same as the previous one:

  SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO

  concerning

  Pieter

• Oracle 10.1.0.4 on Windows Server 2008 64 bit Standard

  Hello
  
  For purposes of migratiion, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard and then update to 11 g.
  We forced installation Oracle 10.2.0.4 on a Windows Server 2008 64-bit Standard, but we are not safe for 10.1.0.4.
  
  Given that we do not have this version of the software to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bit Standard?
  
  Could you point me to a document referring to Oracle versions compatibility with Windows Server 2008?
  
  Thank you

  At MOS, click the Certificates tab, and then enter the database in the first menu drop-down and select the RDBMS. Then enter the relevant information in other blocks, and then you will see the database Oracle 10.1.0.4.0 is not certified for Microsoft Windows x 64 (64-bit) 2008 R2

  Certification is a little stricter than the support, but extended support ended in January.      REMINDER: First Support for Oracle Database 10.1 ends January 2009 [761713.1 ID]

  There is always a lifetime support, but your case shows how useful that can be.

• vCenter Server 4.1 U1 Installation on Windows Server 2008 R2 SP1 x 64 does not work

  My vCenter Server Installation in my test environment failed with the following error:

  

  I couldn't find any article yet. Windows Server 2008 R2 x 64 SP1 is supported as a virtual machine but not not to host the virtual Center Server?

  Help, please...

  Hello.

  Is this server Windows 2008 R2 SP1 a controller domain or already running ADAM?  This may be the cause of this message.

  Good luck!

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.

• Windows Server 2008 32-bit standard on esxi 5.1

  I'm sorry if this has been answered I couldn't find.  I currently have an ESXI 4.0.0 with Windows 2008 standard 32-bit domain controller server. Our company is upgrading to a new box 5.1 U1 ESXI is it possible to transfer and launch this server to the new box? I thought that I read somewhere that it may be that the 64-bit installed servers.

  I thank in advance for the help

  Welcome in the community - Yes you can - Virtual Machines can run 32-bit servers operating systems is that vSphere run on which must be 64-bit machines

• Windows Server 2008 R2 SP1 restart at a specific time

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F546DF0, 0xFFFFF88003F030C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F480298, 0xFFFFF88003EE30C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F5BD8E8, 0xFFFFF880038440C0, 0 x 0000000000000002, 0 x 0000000000000000))

  Failure of the operating system (control bug of Windows, STOP: 0x000000D1 (0xFFFFFA810F484CA0, 0xFFFFF880038440C0, 0 x 0000000000000002, 0 x 0000000000000000))

  (Bug of Windows control, STOP: 0x000000D1 (0xFFFFFA810F3C0910, 0xFFFFF88003F130C0, 0 x 0000000000000002, 0 x 0000000000000000))

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• On Windows Server 2008 SP2 cannot upgrade an intermediate version to a construction parts on Windows Server 2008 R2

  While trying to upgrade SP2 2008 to 2008R2 I get "You is impossible to pass an intermediate version of generation of a coin" - does that mean?

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

• 7.1 WS can run on Windows Server 2008 R2?

  Pouvez Workstation 7.1, that supports the x 64 Windows Server 2008 R2 VM guests, run on a x 64 Windows Server 2008 R2 Server?

  If it works, I can run several Machines virtual Windows Server 2008 R2.

  Hello

  RTM - http://www.vmware.com/pdf/ws7_manual.pdf PAGE 26 if you want to see for yourself. Windows Server 2008, Enterprise Edition, SP1, R2

  Windows Server 2008 Standard, SP1, R2

  Yes, he does!

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful