T43 Screen LCD

Similar Questions

• Satellite 5205-S505 - support wide screen LCD TV?

  I have a new wide screen LCD TV with a VGA port, I connected this with my old Satellite 5205-s505 via the VGA port as the second screen. But it displays 'unsupport signal' on the TV screen.

  Can someone have the answer.
  Thanks anyway.

  Hey,.

  I think that it s according to the external display what resolutions it supports.
  Normally, your computer user manual laptop, you will find a list of the supported screen resolutions and you should check this!

  I also recommend to install the last page of Toshiba display driver.

• dust behind the screen LCD - common problem?

  Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
  facing a problem with the LCD screen.
  There seems to be a defect or the dirt behind the glass
  because it blocks the light of a pixel. Any attempt of
  apply moderate pressure to move this filth that has failed. I was
  I was wondering if it is common with screens LCD expect a sort
  I can't believe that this has passed quality of imperfection
  control. Have I not justification for firing
  toshiba for fixing, it is barely 1 week old?
  I have read the warranty booklet and there is no mention of
  dead pixel return policy can you elaborate on what is
  and what is not covered by the warranty?

  see you soon,

  Richard.

  Hello

  In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.

• IQ816 double video screen LCD (multiplex) problem

  I have an iq816 in which the motherboard just died, then it wouldn't turn on, POST, nothing. The motherboard has been replaced and the system now starts at the bottom of windows very well with one exception: all that is shown on the display is multiplexed 6 times. The image to fill the entire screen fills to only 1/6 of the screen and is repeated 6 times. The machine has no video output, so I can't test an external monitor.
  
  Here's what I know so far:
  1. the symptom appears during the during the POST, not only in Windows and BIOS configuration screen, then it cannot be a driver problem.
  2. the system has a video card discrete MXM and two LVDS ports on the motherboard (LVDS2 for discreet video) and LVDS1 for the embedded video. I already tried to remove the discrete video card and connecting the LCD to LVDS1 (integrated video), but the problem persists, this isn't a video card problem.
  3. in the configuration of the BIOS, the machine claims to be an iq504, not an iq816. I know that the machines take the same motherboard (same HP reference at least), so I don't know whether to be alarmed by the present or not. I tried to Flash the latest BIOS for the iq816, but the listed model is always incorrect. Is there another firmware, I need to flash, or is it a distraction?
  4. There is a set of DIP switches on the motherboard that I have not found any documentation on, but they are labeled GPIO, so I doubt they will help. Yet, no idea this here?
  5. There is a block of jumpers 8-pin without a label. I think that the bit is used to reset CMOS and reset password, but would like to know what are the other pins.
  
  6. the causes I can think of:
  A. bad cable LVDS (other on command - update)
  B. bad screen LCD (game over)
  C. something to do with this strangeness of motherboard model
  
  Thanks for any help/insight!

  Hey joesuffceren,

  I'm sorry that you use in this show, but thank you for providing this useful information! I did some research on your motherboard.

  Here is a link showing the motherboard specifications - develop internal connectors

  GPIO is listed there as the DIP switch used in the factory to match the motherboard to the LCD so it might be your answer. I searched for any kind of documents I can find on which positions the rider must be on for the iq816 but have not yet find something. I wanted to get this information for you right where you want to go ahead and try changing this autour rider to see what works.

  I hope this information helps! Forward to your response

• How can I remove the base on a screen LCD S232HL?

  I am moving and you need to remove the base of a screen LCD S232HL can anyone help?

  I think you have to shoot, place the monitor on a flat surface with a cloth under the screen to prevent scratches and pull on the base.

• Replacing the screen LCD Z30 blackBerry for Z30

  I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

  As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

  Make sure that you don't get the Verizon version, you want the GSM model which is more common.

  I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

  Good luck.

• How to set up two monitors with screen LCD and HDTV on computer that is running Windows 7

  Issues of identity and position monitor

  I use a LCD and an HD TV on my computer. I have HDTV mounted to my left on the wall in my room and the LCD is on my desk in front of me. I have my monitor set as my main screen and HDTV as secondary. Windows identifies the HDTV as monitor 1 and my screen LCD 2. After starting the computer they work very well as they should. My problem is during the boot process. When the computer starts, it displays only the boot screen/POST on monitor 1 (HDTV) but not my main screen #2 (LCD). This is a problem when I don't have my HDTV now, I don't see the MESSAGE options. I don't want to always have my HDTV and crane my neck every time I need to change the BIOS settings or use the MESSAGE options. Is there any solution for this?

  Chris

  AMD Penom II x 4 940

  Windows 7 64 bit

  Gigabyte GA-MA770-UD3

  NVIDIA GeForce GTX 275

  DCLCD 19 "VGA monitor

  VIZIO HDTV 32 '' (hdmi) "

  Hi Darth Polizei,

  I hope that's not redundant but did you try to set your monitor 19 "as the main display?

  1. In the screen resolution window, you click the icon of the monitor that represents the secondary monitor.
  2. You click to select the "Make my main screen" check box, and then click OK.
  3. You log out of the computer.
  4. You log on to the computer.

  Please let us know.

  Thank you!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sony VAIO all-in-One PC 20 tap computer touch screen LCD SVJ20214CYB Windows 8.

  I want to buy the Sony VAIO Tap 20 all-in-One PC computer touch screen LCD SVJ20214CYB Windows 8. I'll be able to use a Wacom digitizer pen in Windows Journal and Office OneNote?

  Hi Treoc,

  Thanks for choosing Microsoft Community!

  Want to know if the Wacom digitizer pen works in the Windows Journal and Office OneNote, I suggest to contact Wacom Digitizer support.

  http://community.Wacom.com/

  I checked in the Center of Windows 8 compatibility for more information about this device, unfortunately it is not listed there. You can also check using this link.

  Also see this link for Windows 8 features:

  http://Windows.Microsoft.com/is-is/Windows-8/meet

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Windows 7 can be installed without screen lcd monitor r

  Windows 7 can be installed without screen lcd monitor r

  N ° you must enter information and you will need to see what happens...

• Bubble like spots on the screen LCD T410

  Just noticed this a few minutes ago on my T410 (2516-CTO), there are three major tasks and three small spots on the centre-left of my screen. I tried to wipe the screen with a clean Microfiber cloth and a gentle jet of glasses cleaner on the cloth. All the dust was released, but the tasks remain. They appear only when I inspect the screen with a flashlight on dead. These tasks similar to white reflecting film-y areas, like the surface of the screen LCD is peeled off with very thin air bubbles. They seem to resemble defects under the surface - is my LCD delamination or anything else bad past?

  Doesn't look like it, they think that his 'damage' I have to pay for. I've only had this T410 for a week.

  Good news! After a long out of stock, the technician on-site, finally, came and succeeded him. Less than 15 minutes so I was looking at.

• How to join the table in screens LCD

  Hello

  How can I join the tables in the screens LCD and show them in a datagrid?

  I run LCDS3 and tomcat.

  Any help is appricitated

  User (name, surname, address)

  Address (address, State, country, postal code)

  If you want to display data below in your data grid

  ---------------------------------------------------------------------------

  firstName.       lastName.  State

  ---------------------------------------------------------------------------

  user.firstName | user.lastName | User.Address.State

• T43, screen lost

  Hello

  I T43 and all of a sudden when I turn it on (if it is connected to power or not), the screen behaves as it is turned off. But when I looked carefully, I saw the windows screen, but very very very dark, it is not something that you can work with.

  Is there anyone who knows how to guide me to check the connector of the screen? If you know a guide web of Lenovo, it is of course as good as well.

  Thank you.

  Given what you have said so far, I'm fairly certain that your graphics card is on its way.

  You may want to try would be to unplug the laptop from the map and then LCD try DVI + VGA at the same time. If this fails to work, then the new Board of Directors (or re-balling/re-flowing from the old) is called to

  Good luck.

• Qosmio G50 - 10 H - how long expected the last screen LCD?

  Hello

  I'm on my 3rd Qosmio now, this time a G50 - 10 h. My 2 other Qosmio broke out after that the screen is empty and then I have nothing but static "TV as".

  My current Qosmio started broadcasting a very quiet, but noticeable whistling from the lower right of the screen. There is also a black (sometimes white depending on where you're standing) mark on the lower right part of the screen. My research I indicates that the LCD is on its way, so I ordered a replacement one.

  I wonder how long these screens should last?

  I use the laptop an average of 56 hours a week (if not more - I know it's a lot) and I've had since August 2008.

  All thoughts
  James

  Hey Buddy,

  In my opinion, these things can happen and if your laptop is still under warranty any is ok in my opinion. Here, you can get a new free exhibition and from my own experience, I can tell the repair goes very quickly and you get your laptop in a few days only.

  In addition, I have a Qosmio F50. I use it every day for my work, games, etc., also at least eight hours a day, but I t n have no problem still with the LCD. :)

• New screen LCD Satellite 110CS

  Hi all

  My problem is that I have a motherboard EPIA M1000G LVDS and I train to connect and old 11.3 "SHARP LCD for laptop 110CS Toshiba I got in my basement and wanted to build a similar computer as the HP all-in-One Series with that stuff

  The module that I need for my "LVDS-05" epia motherboard is no longer available for sale, as I've looked everywhere on the internet and found nothing in STOCK. If I have to mention the fact that my motherboard has LVDS on it.

  So I came up with the idea that I'm directly connect my monitor to the motherboard, then another problem came out, because the screen I have a 40pin cable that was original connected to my motherboard for laptop, but I can't find the datasheets for the diagram, that the cable is that.

  The SHARP display is a VF0166P01 / LM80C219 model SVGA, color STN LCD 11.3 "

  I hope that this project will rise again, as it is at this time shinking...

  Thank your for your time and the greetings of the Greece,.
  SpawNerGR

  This laptop is old that I think someone here can help you with this.
  I mean, what you need is a professional help. Read your ad once more. Who can give you answer that?

  What you can do is to visit the nearest service Toshiba and explain the situation, pay coffee for the guys out there and I'm sure they can consult the manual for this oldie and help you with this.

• Satellite P200 and screen LCD Samsung T240HD - impossible to get good resolution

  Hello
  I can't force my laptop P200 with radeon 2600hd to work properly with the Samsung T240HD LCD screen.
  Nor with the d - Sub or HDMI output.

  Using d - Sub maximum resolution I can get is 1024 x 768... monitor can go up to 1900 x 1200. With different laptop ex Toshiba P100 with nvidia Go7600, everything is OK - 1920 x 1200 goes like a charm.

  Much worse is to use an HDMI output. Photo is very poor - I can't choose any standard resolution. Worse than common crt tv (SD).

  I have a new Toshiba support web pages display drivers.
  The cables are OK.

  Any help?

  Hello

  I'm really surprised that you can get the resolution of 1024 x 768 only. According to the specifications of the laptop for P200 with ATI graphics support for external monitor resolutions are:
  640 x 480
  800 x 600
  1024 x 768
  1280 x 1024
  1400 x 1050 is not supported.
  1600 x 1200
  1920 x 1440
  2048 x 1536
  Then maybe you should try to use the original driver Samsung