T43 there a fuse or a mosfet (power transistor)

Similar Questions

• is there a fuse for this laptop? is the computer pavilion dv6-2150us laptop

  is there a fuse relpaceable on or near a pavilion dv6-2150us motherboard

  Is the power supply for the pavilion dv6-2150us originally?

  Remove the main battery and connect the AC adapter and try it turn. It is safe to do so.

  If that doesn't work try a hard reset as follows:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your positive or negative results.

• No light when I plug my extreme. Is there a fuse I can check?

  No light when I plug my extreme. Is there a fuse I can check?

  What model of AirPort Extreme?

  "Makes it look like a 'tour', or is it' flat ' and 'square' in shape?

  If it is "flat" and "square" shape, it would really help to get the model number. It's at the bottom of the device, probably incorporated into the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits.

• HP Pavilion 500-199: is there a reason to change the power supply?

  is there a reason to change the stock PSU? Many people have been telling me that the stock of POWER supplies are really bad, especially after I ugraded to a 750 GTX. The card works perfectly. So... is there a reason to change? Also how effective is the current PSU?

  Another way to explain this.  The GT645 stock used 31W, the GTX745 uses 55W.  The 300W PSU stock, as you say, has been powered of the GTX745.  So, it is fair to say that the stock of 300W PSU had enough wattage to spare to run the new card. "GeForce" States that the minimum power should be 300W. Feeding is minimum.

• My laptop does not work on battery even though the indicator said there are 90% of the available power

  original title: laptop BATTERY

  My laptop does not work on battery even though the indicator said there is a 90% power disponiblesLorsque it is plugged in and charging. The battery would be dead even if she says she can still exist?

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• Is there some kind of widget active power to Pinterest available in Muse?

  There are several widgets for Muse available that show your last PIN or a Board, but it is also an available with a stream widget live of what you're pinning?
  I know there are Facebook and Twitter live feed widgets, but none for Pinterest...
  I thought about the idea of connecting Pinterest with Twitter, so if you pin something it shows on Twitter and then automatically to the site via the Twitter widget, right? But it is better to have a direct link to Pinterest...

  Can someone help me with this?

  You can either go with html insert to pinterest or try this widget:

  http://musewidgets.com/products/Pinterest-widgets-Pack

  Thank you

  Sanjit

• When I turn on my computer there is no signal to moniter, but if I turned off the power strip and turn back every thing comes on the property

  See above

  Hello Tdr2970,

  Thank you for your message.  Have you tried using a different power strip?  I know that there are fuses inside power strips, maybe the fuse could go or is released.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a Toshiba Power Saver for Satellite M45 with Vista

  Dear all,

  Is there a version of TOSHIBA Power Saver for windows Vista that do not check the model of the computer before installation because I Satellite M45-S265 and I know that it is not supported for Vista, but I got vista successfully work on GST on it to help I will be grateful.

  Kind regards
  * Fr. Mohamed Hussein *.

  null

  Hello

  You're right about the support of Vista. AFAIK there is no version of universal power saver, but in my opinion you don't need it at all. Tool for Vista does not seem like the old version and Vista many parameters were taken over from Vista itself.

  Because of that I'm sure you didn't need at all. Be happy that Vista works well on your laptop satellite. Optimize the operating system and enjoy.

• Is there a keyboard shortcut for a constant power?

  Is there a keyboard shortcut for constant power, between two clips, in the first CC as cross dissolve (Ctrl + D)?

  Thank you in advance!

  Set it as a audio trans. by default and use shift ctrl d

• SAT P100 wired wrong power

  My friend plugged a power supply 18v to my laptop which, for this model should be 15v. Now when I plug the proper food in, not even the power led lights up. Is there a fuse to replace or reset that needs to be run to make it work again?

  Please help I need my laptop for work!

  Thank you
  .

  As far as I know that nothing can be reset. Probably there is a problem of electronic power and I fear only Toshiba authorised service partner can help you.
  Let them control the electronic power supply.

  You can use your laptop with battery only?

• 3010 - 3 bad switching power supply

  We have 20 Optiplex 3010, bought in 2012.
  I recently had the power out in 3 separate units, on a space of 2 months.

  Anyone has an idea why a diet would go out and why so many of them would be? (There is no light, when I push the test button)

  Is that what I can do to fix a power supply? Is there a fuse in the power supply? Some power supplies in older computers have a fuse, but I do not have a fuse in it.

  Thank you

  Doug

  Honestly, I'd say a normal wear and tear or bad luck?  I have a brand new power SUPPLY Corsair PSU in my computer custom-made who started making noise and its only 4 months :-(

  Regarding the fuses etc, if it doesn't have them it would be HIGHLY recommended to just replace the PSU because no user is fixable in these power supplies.  They are slapped together and as cheap as possible, but it may be possible to replace them.  Sometimes the fuses are covered with a plastic/rubber sleeve so that they can be hidden (from some of the ones I've seen).  Just be sure that the capacitors are drained of power and the power supply died worldwide before tinkering with it beyond.

• Apple Watch loses power

  I stainless steel Apple Watch, of computing power lost and won't take a charge.

  There was no warning of low power, she just died.

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

  • Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -If necessary, then try force it restarts again.

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• Power Mac Pro 2010 problems

  So I just bought a Mac Pro 2010 and it ran fine for a day or two and then I noticed that when he falls asleep the light never blinks and turn even a problem.

  If the unit is off, when I first press the button there is a click but the led stays off and nothing happens. I have to hold down the power button until there is another click. When I press the button once again, there is a click and the power of fans on and the machine finally starts. Although the chime time seems very long.

  However, when he goes to sleep, the monitor turns off, I can hear the fans turns off but never flashes as it should the. Subsequently, the computer cannot be awakened from his sleep. This happens if the timer is active, I press the power button or choose to sleep in the menu. I have to hold the power button to turn it off completely, then start it again. Also, when I press the power button to restart the same as above occurs.

  I ran Onyx to flush all caches that I left my SSD (OWC E2) my Mac Pro 2008. I also reset the SMC and the LANDAU and also ran the Apple Hardware test. Nothing has helped and no errors not found in one of these trials. I tried simply have a HARD classic in this drive and removed all my cards accessories but that does not make a difference. Even when I start windows via boot camp the same problem occurs with sleep.

  Any suggestions?

  I had a similar with a 2010 6 core Mac Pro problem except that the Mac I never sleep, so sleep was not involved. An Apple Store Genius diagnosed as a button battery failure and, eventually, the PS. I asked that the two be replaced since the support for that Mac ends. It's worked OK since then and at Pick-up, engineering was agreed that, while the battery needs replacement, the real problem was the PS.

  Until the repair, one of the things that helped aims to let the Mac disconnected from the AC line for about an hour. Immediately after it by plugging in, he would sometimes start and then work.

• Lower power mode

  Is there any problem in leaving the power down, even if the battery is completely charged?

  There is no "problem" to do, but the functionality will be slightly reduced.

• Power supply selection guide

  This MOD can make a post-IT.

  Here is a general guide on how to select a power supply for your HP desktop computer.  The majority of the standard ATX power supply (PSU) must fit in an envelope of HP.  The exception would be a slim casing or the esoteric Merle.

  Looking for a certification 80 + on the PSU to save electricity.  A PC is normally idle or operate at low load 75% of the time.  Therefore, to find a power supply which is more effective in the range 50 - 90W.  A power supply 80 + 350W reaches the level of efficiency of 80% at the exit of 70W (20% of rated output).  The output must be greater than 140W to achieve the same level of efficiency of a PSU of 700W 80 + equivalent.  So choose a power supply that is rated at 25% more than the maximum load of the ACTUAL spending of the rig you will save more of $ on electricity.

  A modern PSU is designed to achieve maximum efficiency between 20 and 80% of the nominal power.  Running a power supply above 80% charge level will result in excessive heat, noise and premature failure.

  A platform Nvidia GeForce GTX 280 (1024 MB of RAM) will rely on 350W max to the wall.  Taking into account the effectiveness of a block of power SUPPLY 80 +, the actual load on the power supply is only 280W (350 x 0.80).  To calculate the required power supply, multiply the actual load by 1.25 (25% margin).  In this case we only need a PSU 350W (280 x 1.25) to run this GPU.

  Let's apply what we know of a rigging of Radeon HD 4870 (512 MB RAM).  290W max to the wall.  Actual load is 290W x 0.80 or 230W.  Now, apply the 25% margin rule and we come to a requirement of 290W PSU (230W x 1.25).  Even if we apply a safety margin of 50%, the power required is always under 350W (230W x 1.50).

  There are no overspec need the power supply by 50%, unless you run your PC up 24/7.  Don't forget that there is a huge variation in the quality of the PSU and side.  Maybe a good 500W PSU is not able to provide as much energy as a quality 350W.  Antec Earthwatts/NeoPower/TruePower and Corsair Seasonic are widely available at several American retailers of quality units.

  High-end power supplies number will need additional power supply PSU in the form of one or two 6/8 pin plug GPU.  You can buy an adapter to convert a molex 4pin to plug 6-pin power of GPUS.

  http://www.TomsHardware.com/reviews/GeForce-Radeon-power, 2122 - 3.html

  Hi Nautsj,

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  www.Newegg.com has many choices of power supplies. Corsair, OCZ, Rosewill, Thermaltake...

  The typical EVGA GTX 570 in 9 "long.  The adjacent slot on the PCI-E x 16 slot must be vacant.  Open your PC and do some measures so that you know for sure if the card fits.  According to me, it will fit.

  For what is a PSU, Corsair CX600has very little growth, but the Corsair HX650gives you plenty of space to grow.

  I use the HX650 in two PC.  It is a modular model in order to have better options with the selection of cable.

  "How-to" HP articles should be useful.

  TIP: When installing the power supply, unlock the scanner and slide it forward to facilitate the removal and installation of the new power supply.