KERNELBASE.dll blocking SKYPE. Started after critical W7 updated 19/11/2011. Any ideas?

Similar Questions

• Every moment & then my Vista Original fails to start after an automatic update & shutdown.

  I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

  Any Advisor. Should I upgrade to XP?

  Hello

  Make sure that you do not install hardware 3rd party via windows update drivers

  they are normally not up to date and can cause computer problems

  change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ;

• InDesign fails to start after update (on Win7). Any ideas?

  InDesign fails to start after update (on Win7). Any ideas?

  I reinstalled InDesign and also restarted creative Cloud App.

  Had to happen at a crucial time in date limit!

  Help :-) gratefully received

  The program does not start and immediately gives the error "Indesign stopped working and needs to close."

  In the end I contacted support and they had to fix the program.

• APPCRASH-fault Module name: KERNELBASE.dll on Skype and Visual Studio

  I had this problem I tried to solve for awhile, please see here, the problem originally: http://stackoverflow.com/questions/24416708/appcrash-on-kernelbase-dll-visual-studio-2010-with-team-explorer

  However, now even my Skype gives me problem. I use Windows 7 Pro x 64. Here are the event log:

  Name of the failing application: Skype.exe, version: 6.16.59.105, time stamp: 0x536b58dc
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
  Exception code: 0x8000ffff
  Offset: 0x0000c41f
  ID of the process failed: 0x219c
  Start time of application vulnerabilities: 0x01cfac4234dac60d
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 75ba6604-1835-11e4-948e-1803731bb61d

  I'm sure that the 2 are linked, there is the Visual Studio 10 error:

  The failing application name: devenv.exe, version: 10.0.40219.1, time stamp: 0x4d5f2a73
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1116
  Exception code: 0xc06d007f
  Offset: 0x0000c41f
  ID of the process failed: 0 x 3430
  Start time of application vulnerabilities: 0x01cfac421b84ae96
  The failing application path: C:\Program Files (x 86) \Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 68514913-1835-11e4-948e-1803731bb61d

  I am attaching a mini dump here (on Skype error): https://onedrive.live.com/redir?resid=99D011127EBB96C! 1291 & authkey =! AOZwnhusrgOKfdE & ithint = the file % 2cdmp

  Please help me understand this issue and if figure you it out, please tell me how you understand? I tried to learn using WinDbg to analyze the dump and load the appropriate symbols but for some reason, that I can not find the root cause. Thanks in advance!

  I finally solved the problem after playing with crash dump, WinDBG, I tried to uninstall the Service Pack 1 (windows.microsoft.com/uninstallwindows7sp1) and everything works again.

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Portege Z930-118 does not start after the BIOS update

  My PORTEGE Z930-118 failover and wont start after I upgrade in the middle of the upgrade I remove power, then press stop down after I see the power and wireless but the screen stays black?

  Any help please

  In this case the EPROM has to be reflashed once more using crisis disk BIOS.
  Usually this must be done by authorized maker Toshiba. But of course this will be possible only if the EPROM module has not been too bad.

  What to say: try procedure (link above) posted by Bob. In which case it will not work, ASP is your next contact point.

  Good luck

• My Satellite will not start after installing Vista updates

  My Toshiba satellite laptop does not start after the installation of updates. I get the Toshiba screen, then a screen that gives me two options. Start windows normally or repair windows. I tried both but you just Tousez in circles to the same screen.

  I didn't have any rescue CD or save a Vista CD with my computer

  Can someone help me. Do you have ideas how to run again.

  Thank you very much
  Christine

  Hello Christine

  Can you please tell us which laptop model you have?
  Did you start your laptop with F8?
  What happens when you click Repair option?

  Please give us more information.

• L875D-10th satellite no longer starts after the system update

  Hello

  After a Windows Update yesterday my system unbootable - little matter what I try!

  And I tried many things to get it started again.

  think like:

  -Passage uefi depents csm and back on trial
  -Different installation DVD original Windows (Win 7/8 x 64 & x 86)
  -Different USB key
  -Erase the HDD on an external PC
  -Reset the UEFI with F9 while inside - system breaks down right!
  -Remove the BIOS battery and battery hand while it is also removed from power like 2 hours
  -Replace the DVD with another
  -Tested external RAM and HDD - ok status

  I can access the menu of boot with UEFI himself (channels here is saved and system restarts), but past that I just get a black screen with backlit, on NumLock no longer, have powerdown to reset.
  At startup, I see the Toshiba Logo.

  Is there an external means to completely reset the UEFI next to Load Defaults while in there?

  Any other suggestions I can do?

  (Sorry for my bad English and greetings from the Germany)

  Hello

  > Is there an external way to completely reset the UEFI next to Load Defaults while in there?

  There is no other method to change the mode of the UEFI.
  You must do it in the BIOS (press F2)

  In order to boot from the external environment or to install systems as Windows 7 or other, need you to change disable secure startup and must pass the CSM UEFI.

  In which case you would use the Toshiba recovery media, these changes are not necessary.
  Have you tried to reinstall the system using the Toshiba Recovery Disk or Flash Recovery USB stick?
  Did you create this recovery media in the past?

• Z50-75, does not start after the bios update

  Hi all!

  I just baught Z50-75 with AMD FX7500, 8 GB of Ram and FreeDOS. I installed Windows Pro 8.1 and they shot a few drivers during the installation and I went to the view of Lenovo and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and everything was OK The latest drivers I've seen on the site were originally from the BIOS and I downloaded those to and he started the installation, after which he said: "the system will now restart for the changes to take effect" and he did, but it wouldn't start after he did that show me this on the screen:

  And I tried both options (either with the Windows CD inside), but it just stays where it is, no effect.

  I can enter the bios and change the settings, but none of them seem to work because that's the maximum where it will go, the only difference is when I change from AHCI to compatibility mode, it restarts and I get a white screen, I have to use a button recovery to return to the image above...

  I appriciate any help kond, please give me some advice.

  Thanks for the reply!

  I solved the problem after updating the bios, communication between it and the disk hard drive had a few problems and is causing the boot problem. I solved with out the hard drive and install on another laptop, flashed the windows and installed the hard back in my Lenovo, and that worked.

  You tell the truth, I don't really know how it was the solution, but it worked, I guess that Flash just windows helped the hard disk to create the new connection to the bios, that the first was simply corrupted by an error during the update of the bios...

  Now, I know that the bios update is the last solution I'll never use, and of course, save all peace of data I had on the hard drive if possible.

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• brand new HP ENVY 17 Quad TouchSmart t does not start after the BIOS update

  I agree allow a recommended HP BIOS update today and after the update, it requires a reboot.  The system warned me after that I have authorized the restart that the screen would go black and he told me do not turn off the computer.  I obeyed, but then it was never restarted.  I waited 20 minutes and I got a black screen.  I stopped the power and tried to restart, and the power lights (LED keyboard and power button / stop is turned on), but it's just a black screen.

  Looks like others have had this problem.  Any ideas?

  I solved the problem with the help of a few others on the forum.  I had to remove all USB devices and turn on the power and it starts up as it should.

  Thank you.

• Computer does not start after Windows 7 updates

  After the updates this week, Outlook crashed during an attempt to open the html emails.  I noticed that the Start button says to restart to be able to install the updates. Instead of restart, the screen went black.  I turned off and tried to turn on the computer.  Normally clicked and then dormant material.  Never on screen and remains black.  Have tried several times to disconnect all the equipment and power nothing doesn't.

  I have backups on an external hard drive but no ERD for Windows 7.  Read suggestions for open mode without failure etc. but if the SCREEN IS BLACK AND the COMPUTER don't YOU CAN t CHANGE THE PARAMETERS of START!

  Any ideas?

  Hi Joel,

  Thanks for posting your query in Microsoft Community.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2: If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3: If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Bridge is no longer starts after the last update

  Hello

  After the last update of CC 2015.5 bridge will start is no longer. I get the window that shows that "Adobe Bridge CC unexpectedly quit' almost immediately. Of the window:

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x000000000000000c

  Note the exception: EXC_CORPSE_NOTIFY

  Have uninstalled and reinstalled. preferences ransacked without success. I am running the latest version of the operating system. CC of other apps that I use (PS, I, ID) seem to work. 5 Bridge works fine.

  Any help would be appreciated.

  Thank you

  Ted

  Hi all

  We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you will need to update the creative cloud application and restart your computer.

  Thank you

  Deepak Gupta

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>