T440 - problem with built-in camera?

Similar Questions

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Problem with connect Ethernet camera or vision Builder

  Hello world!

  I have Airlive POE-100CAM. It is possible to connect the camera with NIVB?

  I want to receive the image with this cam and inspect in NEITHER.

  I connect the camera to the other computer from my site, but NEITHER Don t see cam.

  Where is the problem?

  Thanks for your advice and sorry for my bad English.

  Frit

  This device is not compatible with IMAQdx. Camera IP (network security cameras) support is currently limited to mark Axis and Basler cameras.

  Eric

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Problems with importing video camera mini dv JVC

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  I turn on my camera and put it on the playback mode. I have IE 1394 plug in my port on the camera and the pc. I open windows dev and click Import from digital video camera. A noise of error made. A message appears "import video is already launched and running on this computer. You cannot start another instance of import video until the first instance has stopped. To correct this issure, wait for the video to be import, close import video, wait a second w fe then start import video. »
  I'm doing this, but I know that I do not have started to import anything. I can sit there all day and wait and try again and again and the same message appears. I also tried to restart the pc and start the process again. Same thing is happening. I tried on my friends laptop same thing occurs. I recorded it before on a destop with another type of fire wire but my laptop cannot use the 1394 cable.

  ==========================================
  Maybe the following will help:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/DLmovies.mspx

  Windows Vista-
  A problem of import
  files in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems
  Windows Vista-
  Importing files into Windows Movie
  Manufacturer: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problems with D7100 and Camera Raw

  I can't open the .nef files saved on my HARD drive with the D7100, happens with CS6, 4.4 LR and LR beta 5.  However, if I have the card connected to the PC I can import into both versions of LR and then be able to edit them in CS6 ranging from LR.  I tried to uninstall and reinstall CS6 and LR 4.4, but no difference.  I use Windows 7 Ultimate.  Any suggestions?

  How you import raw images to the computer? Using Adobe Photodownloader or Nikon Transfer? Older versions of Nikon Transfer give problems with new cameras.

  You probably have the latest version of Camera Raw for CS6? It should be version 7.4 to read D7100 files. Check the version of Photoshop (help > about Plug-ins).

  7.4 update, use the Help menu of Adobe Photoshop/Bridge updates option.

• Problem with settings of camera R3D in first Pro CC2015

  Hello

  I can't go into "DEVICE SETTINGS" on my R3D files. I tried with different footages, it did not work.

  The menu "device settings" is just gray... I can not click.

  I was in RED CINE X Pro, without any problem with the MDM. Same thing with DaVinci Resolve.

  None of the files are corrupt.

  Thank you for you helo!

  iMac (27 inch, at the end of 2013)

  3.2 intel core i5

  24Go ram

  NVIDIA GeFoerce GT755M 1024

  For any clip of R3D (or another format that used to have the Source settings) imported CC, 2015, the settings feature moved to Master Clip effects.

  Excerpt from the doc for help:

  Parameters of source code available in the effect controls panel

  For RED, ARRI, CinemaDNG, DPX and Sony F65 media files, you can set the Source settings using the master tab in the effect controls panel. Previously, the settings of the Source were available in a modal dialog box.

  Summary of new features

• ac170tu: problem with a vga camera

  Hello

  Can someone please help with this problem.

  IAM cannot use my camera and light buttons.

  camera: error message, you do not have the compatible vga hardware or driver to run you cam

  touch of brightness: brightness buttons does not

  I tried to uninstall and install the graphics drivers unresolved problem.

  Please help me solve this problem.

  Hello:

  Try this graphic driver... a 1 on the list.

  https://Downloadcenter.Intel.com/download/25274/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

• HP Elitepad 900 G1 - problem with built in SD card reader.

  Hello.

  IM was a proud owner of HP Elitepad 900 G1 up to the point where I tried to put a 8 GB miniSD card in to built in card reader.

  The map was visible in the windows Explorer 8 for 15 seconds. Then he disappeared.

  After a long battle with drivers, internet solutions etc (nothing worked btw.) I ve installed windows 8.1 update.

  It still does not work.

  My card works perfectly in all the other electronic stuff (laptop computer, mobile phone).

  Can someone help me?

  I think I solved this problem. (Sorry for my English but I'm Italian).

  The solution is very simple, I tried several times and in my opinion, it works.

  It is necessary only to disable 'Quick start' options in Windows 8 / 8.1

  -WIN + X key, then go to 'Power Options'.

  ' - 'Choose what the switch / do"(click on it)

  "-"Change settings that are currently unavaiable"(click)

  -In 'settings Shoutdown', uncheck the 'enable quick start (recommended)'.

  Please tell me if it works for you.

• Problems with my bb8520 camera blackBerry Smartphones

  I can't open my bb8520 camera app. It says that I need to first close all other applications, but the continuous problem. What can I do?

  With the BlackBerry device under voltage, remove the battery for a minute, and then reinsert the battery to restart.

  Now, try the camera again.

• problem with Preview on camera vs what happens in acr

  I don't know if it's my camera or my photoshop cs6, but I pull manually and use AWB. I've never had a problem until recently. My images are superb in my viewfinder cameras, but when I open them in photoshop, everything is too saturated and dark. I opened in Lightroom and the images look the same as my camera. When I adjust in lightroom and click on "change in" photoshop, it reopens in photoshop, but is even darker and too saturated. When I'm outlining for the skin and deliberately overexpose the background, the image seems LARGE in camera, and when I saw it on my mac, but even once as soon as I open it in raw-black... more saturated and extremely difficult to work with all skin tones will eventually be very yellow and just YUCK!

  I'm shooting in raw, so I don't know what the problem is only recently started and I don't know how to fix it. I have not changed the settings on my camera photo/photoshop. I was told that I should change my color on my camera space should be in Adobe RGB and sRGB not. I tried, and I still have the same question. I'm shooting with a Canon 6 d. If anyone knows anything, please let me know!

  Help, please

  If they look good in lightroom, then I'm more likely to think the color profile changing what it looks like in photoshop. You use a standard monitor?

• forms of migration to 11g - problems with built-ins absolete

  Sorry if this is the wrong section, but the nerves are out and I'm lost.
  
  I tried to migrate from an old database 8i probably with his tools and forms in 11g. All the software seems fine, but when I try to run the forms I either get error 'this form was conducted using a generator of old forms", or worse - some enigmatic FRM and ORA (exception 6508) mistakes apparently connected to the lack of a procedure called in the form triggers.
  Now, you'd probably say "just recompile these forms. But I can't do it - I have tons of compilation errors, for the most part from built-ins absolete or try to select the views system. This occurs when you try to recompile the libraries referenced by these forms, which is probably why I get these procedure without error.
  Given that the quantity and the nature of those overwhelmed me that I tried to use Migration Wizard Forms... talk about Paris on the wrong horse. First I had to change the property of "start in" the shortcut assistants where I stored forms libraries either he kept to launch bookstores out of such forms. Then I got a bunch of files, LDP and the most important libraries without change, with no mention of any problem in the newspaper of the assistants. Needless to say that my forms always get these errors from lack of procedure.
  
  I'm sure I can figure it out somehow correct the forms if the libraries were ok, but I can not just deal with these problems:
  -What to do about system view selects in the library of procedures and triggers? The compiler treats just as unknown identifiers. I had the same problem also and it's privileges, but this time I can't identify the user whose privileges are read (actually, isn't one who is using the form at the time?) until now I noticed he's trying to use dba_users and dba_roles
  -What to do to correct a library (which can have dependencies on other libraries) to be compatible or at least compiles ' able with the new constructor of forms without having to spend a year on everything?
  I tried to apply changes mentioned in the journal of the assistants (like changing calls RUN_PRODUCT to RP2RRO. RP2RRO_RUN_PRODUCT), but he did not have a good

  First of all, you are in the right forum.

  database 8i probably with his tools and forms in 11g
  I get tons of compilation errors, for the most part from built-ins absolete

  You can look at Chapter 4 of * [Forms of e10394.pdf] Migrating from thedoc.1111of http://download.oracle.com/docs/cd/E12839_01/ of URLs to 11 g *.

  What to do about system view selects in the library of procedures and triggers? The compiler treats just as unknown identifiers. I had the same problem also and it's privileges, but this time I can't identify the user whose privileges are read (actually, isn't one who is using the form at the time?)

  Since you get the error when compiling, you must have sufficient privileges for all objects that are used in the application.

  More important still, if your version of forms before 6i, you cannot migrate them directly to 11 g. see Chapter 16.

  change of RUN_PRODUCT calls to RP2RRO. RP2RRO_RUN_PRODUCT

  As you deploy these forms on the web, I suggest using builtin RUN_REPORT_OBJECT instead of RP2RRO. RP2RRO_RUN_PRODUCT. And to do this, you must write a very simple code.

  Hope this helps you...

• problem with built-in predefined text animations

  Hello

  I just started my first job with AE.
  I want to do a very simple thing: animate text (to be precise, only 3 short words) with one of the excellent effect built in, which was delivered with the product.

  But I realized, that the end result of the effect, that I chose in the list, is different from that how I saw on the site Adobe Gallery.
  Then I tried other effects too (Flash, Flash blue) and with the AE is not the same, I'd say it's on another comprehensive plan.
  For example, text Pulse exposure effect appears to be a very complex thing on the site, while at AE makes only fade in and out of my text: no outline around the letters. characters also do not in growth and shrinkage, so it lacks almost all the fancy functions, that how the effect shows on the Web site.

  Can you please help me where is the problem? Thank you.

  I just tried exposure pulse, and it works very well for me.

  It is possible that the problem you see is related to this tip/warning of "text animation presets", the page I linked to before:

  "If the animation preset requires a color contour or background, animated works only if you have assigned to your text."

  Pulse exposure works by animating the race.

• Problem with the video camera of Sony and the computer.

  I have a new Dell with Windows 8.  No firewire port.  I have a sony dcr-trv19 camcorder and a box of mini tapes I want to import.  I've used the firewire to import and that worked well.

  Someone has found a way to transfer this unit with the conditions described? Windows 8 is not compatible USB streaming. Is Adobe?

  Would be very happy to help!

  That of why you need to check with camera and computer stores in your area. Kind of specialized
  need and those who should have met the question more often. Of course Sony and their forums
  can be a good resource.

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problem with profiles of camera calibration

  I use Lightroom 4.2 under windows with a Canon 450 d for awhile and I use only raw files.

  On the 'caméra Calibration' tab, I could choose between acr4.4, Adobe Standard and a few presets for canon (landscape, neutral, etc.)

  In my opinion the ACR4.4 profile gives me better and more natural colors most of the time

  Last week, I upgraded to a Canon 650 d. When I import my pictures and go to 'develop', I can only choose between the Standard Adobe and canon presets. There is no profile of x.x ACR (replace the 'x' by whatever it takes for a 650 d)

  It is not the end of the world, but is it possible to download it?  or did remove it completely for the newer models.

  In the window "about adobe photoshop lightroom", it says that I have Camera Raw version 7.3. Reinstall lightroom makes no difference and all my drivers are up to date.

  ACR's legacy profile. It no new cameras. It will not disappear for the older cameras, however.

  Adobe Standard is Adobe, well, the current standard.

  If it is not optimal for your tastes, you can change using the DNG Profile Editor.

  Rob