T500 - BSOD - Win XP

Similar Questions

• T500 and Win 7

  I'm curious to know if/when Lenovo T500 will begin to support ThinkVantage applications on the platform of Win 7?

  I was wondering which application you want to say. 99% of recently published applications are works perfectly with the T500. For me only the scanner digital (I think it's my fault) and function of graphics card switch (catalyst 9.4 modded works almost, just crashes )

  Surprisingly, use native/programs Vista drivers, most of them works. 7 specific updates can be found on: http://www.lenovo.com/windows7beta

• BitLocker with T500 and Win 7 Ultimate activation failure

  Hello

  I am frustrated by the inability to activate Bitlocker on my T500 successfully. The machine seems to work in all respects, and I tested the HD at both the BIOS utility test HD and PC Doctor. Despite this, Bitlocker reports a "Bit Locker has not found the drive of the target system. You may need to manually prepare your Bitlocker Drive.

  Microsoft has been unable to provide effective problem resolution, even if we tried a repair of the operating system. "Microsoft Answers" Forum seems to indicate that there's someone else with a similar problem.

  The machine was bought with XP Ultimate and updated fall last to Win 7 Ultimate (without any difficulty and necessary, wipe the hard drive.)

  I do not have a hibernation file and tried to delete a file without success.

  Someone at - it any other suggestions?

  Thank you

  Gary

  I had the feeling that it was something like that. :-(

  Of course, I can do a re-install and my data are presevered on a network drive, etc, but it's several days of work to install all my programs and data. I wish there was a shortcut.

  The unfortunate aspect is that I "just followed directions" on the CD Win 7 Upgrade and the question is how to prevent that from happenoing yet once and where can I find the time.

  Gary.

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Ntoskrnl.exe - ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY - BSOD - Win 8.1

  I have a laptop ASUS ROG very recent with Win 8.1

  Yesterday, for the first time I had a BSOD ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY.

  It's the first time on this laptop and also the first time that I ever had a BSOD since I moved all my PC to win 8 Win 8 launching.

  I ran the Windows Memory Diagnostic tool and all is well, there no problem with memory.

  I also ran BlueScreenView v1.55 Nirsoft and this is the result:

  Ntoskrnl.exe ntoskrnl.exe + 1ae5fa fffff802 '4be1e000 fffff802' 4c5b2000 0 00794000 0x54c832b2 28/01/2015 x 02:52:02 (winblue_r8.150127 - 1500) Microsoft® Windows® NT Kernel operating system & 6.3.9600.17668 Microsoft Corporation C:\Windows\system32\ntoskrnl.exe

  My PC seems to work very well. Should I worry? What could I do to fix the situation? I mean, since my PC seems to work fine, I'm not taking into consideration the drastic solutions of the time like reinstall Windows 8 or similar. I was wondering if there is a fast action, that I can do to solve this problem of ntoskrnl.exe.

  Thank you very much!

  FWIW...

  [Devices with questions]

  ID_periferica_PNP device Error_code

  Qualcomm-Atheros Bluetooth 4.0 + AR3012 HS-PID_3004\5 & 31B872B & USB\VID_0CF3 & 5 0 the device is disabled.

  PS/2 port ELAN Smart-Pad & 25EEF08 & ACPI\ETD010D\4 0, the device does not exist, is not working properly or the driver installation is not complete.

  You may want to investigate these extra features.

• T500 migrate win 7 32 bit to 64 bit

  Hello

  I know that it is possible to migrate 32 bit OS to 64-bit, I called Lenovo support for discs recovery order,

  They said that, in Poland rcovery media will not be sent,

  My question is how to migrate win 7 32-bit to 64-bit?

  How to get the instalation/recovery Lenovo support?

  I'm assuming that the system was built by Lenovo and Lenovo is an OEM distributor and so Lenovo is responsible

  send installation media, but how when Lenovo Poland sends me to microsoft, and microsoft has sent me to the Lenovo OEM retailer?

  Help me.

  Lenovo has maintained a policy that the user can buy the 64-bit support, perhaps you should call again and tell them you want to buy the 64-bit support to the recovery.

• Shortly after plugging in an Ethernet cable, I get a BSOD (win 7)

  As the title says one or two minutes after I have connect an Ethernet cable into my pc it crashes with a BSOD (see photograph).

  

  I searched online and found several topics covering the same accident that the claim that the TI is caused by Atheros ethernet controller drivers.

  I downloaded the latest drivers Atheros and I bought DriverDoc only to make sure that all my drivers are up to date. Frustrating after installing the latest drivers crash still occurs. I considered buying a dedicated network adapter, but before I tried I thought it might be interesting to ask a question here. I can provide a crashdump or more information system if necessary.

  Any help would be much appreciated!

  Harry

  I'm not familiar with Bulguard but you have Agnitum Firewall.  Please check that you do not have as long as it may be the source of the problem

• Premiere Pro 2015.3 CC, BSOD, win 10, DPC_WATCHDOG_VIOLATION

  Hi - just installed creative cloud, Photoshop and Premier Pro. I got it for first. install goes OK, photoshop works very well, but first BSOD every time with DPC_WATCHDOG_VIOLATION. It has never worked. the machine is Windows 10, recent updates. ASUS P8Z77 - V LX motherboard, Intel processor i7 24 GB of RAM, a 128 GB SSD for C:, D: Velociraptor. generic wifi card. That's all that is in the box. BIOS is reasonably up-to-date, no operational problems of any kind. in the years that I have owned this machine, this is the first and the only BSOD I have seen.

  the behavior of specific failure is:

  * from the cloud creative meta-app

  * Click the button OPEN first

  * splash screen displays

  * mouse move slowly in the middle of "blocking detector", after 100 to 500 mS mouse freezes, CAPSLOCK indicator does not work.

  * 5 to 20 seconds later, BSOD, DPC_WATCHDOG_VIOLATION.

  I figured that my fairly old graphics, MSI Radeon HD 7700 card or driver was the problem, so I bought and configured a GeForce GTX 950 EGVA. using a 27 "Displayport monitor.

  I did RTFM and web research I could before writing. I read audio driver from nvidia, integrated audio system conflicts, etc. my audio device (sole) main is a Native Instruments Komplete Audio 6. all other devices have been disabled in the Windows Device Manager. integrated audio system has been disabled in the UEFI BIOS.

  I'm not overclocking, the machine is immaculate inside (eg. No dust bunnies blocking the air), video performance is subjectively good with any application I can think of except the first.

  I made a support with Rahul cat, which connected to my computer remotely and was unable to find the problem. ticket 0188157584. That was before I installed the card GTX 950 and disabled all the drivers/audio devices unused.

  I'm puzzled. I'm about to ask for my money. any ideas?

  Post edited by: missing info to tom jennings

  problem disappeared. I still don't know why BSOD first with the old Radeon card, but for the new card GTX 950, first load properly, no BSOD, after I removed all the bloatware - NVIDIA PhysX NVIDIA, all these nonsense of 3D games. a quick survey of a it seems that even for the games of the assistance program bloating is not helping. na certainly not here.

  as a side comment, it's bad for all of us that the maintenance and installation of the driver has become a venue for advertising.

• TECRA S5 Nvidia Quadro NVS130M - sudden BSOD - Win 7 Pro 32-bit

  After moving from Vista to Windows 7, everything worked fine until two days ago, when suddenly my laptop stopped working. I had to hard restart it, and then all hell broke loose.

  The problem is the following:

  Info part number: PTS53E-00S009EP - Toshiba Tecra S5 - 2 GB Ram Intel Core 2 Duo T7300 2.0 Ghz - Nivdia Quadro NVS130M

  Windows 7 Professional 32-Bit started to report all of a sudden and the error code 43 for the graphics card (Nvidia Quadro NVS130M). I got the latest nvidia drivers, so I uninstalled the previous and restarted the machine and installed the new. After the restart, the laptop crashed with a blue screen.

  I went back to the last known good configuration (drivers vga adapter default of windows, which does not recognize the Nvidia Quadro NVS130M) and the laptop booted up normally allow me to get back into Windows.

  I went to the Nvidia drivers previous, and arrived the same problem, blue screen, go back to the last known good configuration (by default windows vga adapter driver).

  I went back to the latest drivers for the Nvidia Quadro NVS130M found on the download from Toshiba site, same situation as before.

  I went backwards to the oldest drivers on the Toshiba Support downloads site, and the question remains.

  Since August, I have Windows 7 Professional 32 - Bit and it worked fine, it is completely up to date, and have always used the two wit the factory default Vista and Windows 7 Nvidia drivers.

  I have installed windows updates recently, the latest being early November 2011.

  That recent change, about 15 days ago, it's that I've finally found the drivers for the SD card reader, they where for windows XP it is interesting enough, but Windows 7 immediately recognized the SD reader that she had not until then. He could not yet identify the kind of material, it has been.

  I tried to uninstall the drivers from toshiba for the reader of SD card, but even in this case with this uninstalled and hardware disabled in the management of the material, when I try to use the factory drivers downloaded from Toshiba blue screen happens again.

  Another symptom, I noticed is if the blue screen do not occur (when he does it specifically lists a file from drivers nvidia as the cause), the computer will stay with a black screen and the fan will operate at extremely high speed, but there seems to be no HARD disk activity, as the drive HARD activity on the laptop does not light at all.

  I read there is a problem that can lead to the computer by blocking or gel at least that the latest version of the UPEK software is used. However it does not mention anything on a blue screen. Also, given that the blue screen error message specifies a Nvidia driver file name, he wouldn't do much sense this problem it was the UPEK fingerprint software that was the cause.

  He wouldn't make any sense at all because if I leave the default vga only adapter driver and do not install a driver for the graphics card, everything works well, reader SD, UPEK Figerprinting, etc...

  I had all this work, including the fingerprinting software until exactly two days ago for what the confusing too me.

  I ran Endpoint Protection AV software from Symantec, the computer is perfectly clean, there is no virri and indication as abnormal.

  I'm now totally ideas and I can't seem to find information on this topic.

  Your help is very appreciated and urgent, because if all else fails, I would be forced to go back to Vista, something that I wouldn't really really really like to do, because of the hassle of reinstalling OS, Office and software for a total of more than 50 GB and due to the fact that Vista is significantly lower in so many aspects to Windows 7.

  Thanks in advance for your help and support.

  Post edited by: Jörger

  Post edited by: Jörger - Typos

  Post edited by: Jörger - Typos & lack Party Info

  Hi Jorge,.

  I've also read about pilot of fingerprints that cause a freeze on the Tecra series but as far as I know it was about A11 and M11 series S5 shouldn't be affected, but to be honest, the described issue looks more like a problem of graphics chip
  Eventually it s graphic driver not question but related graphic chip problem

  But have you tried to test the laptop with the new OS preinstalled? Try this and use the operating system has been pre-installed by Toshiba in this case, you might check if he s really a problem or a chip driver problem

• Tecra S11 BSOD after trying to install BIOS v3.1

  Tecra S11 BSOD after trying to install BIOS v3.1

  I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
  Win 7 pro
  Where can I find the minidump to see what file that are the problem?

  C/windows/minidump folder is empty.

  Hello

  Do you get the BSOD during the BIOS update procedure?
  Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

  If you have installed your system, then you should check that the VAP is installed as well.

  Also, I found this info about the update to the BIOS:

  + Attention! +

  + Please close all applications before running the update. +

  + At the end of this process, the computer will be restarted in order to update the EC. +
  + While updating the CE, the screen will not appear and the power LED etc can blink. +
  + The computer may restart several times. There is no abnormal behavior. +
  + Please wait until the computer is restarted fully. +

• Problem with after downgrading fingerprint reader

  After downgrading from Vista to Xp business professional, I have some problems with my fingerprint reader.

  The error message is: 0xe7210005 user cannot be saved. Found no fingeprint reader.

  I have already installed the latest version of the driver software and fingerprinting, but it does not work.

  System information:

  T500 2055W2G Win XP Professional SP 3

  SMBIOS Version: 2.4

  Thx for your help

  I got the conversion kit. I just installed Win XP again and now it works

  Thx for your prompt response!

  See you soon

• Satellite C660 stuck in an infinite loop of BSOD after upgrade to win 10

  Wow what a disaster, this is a machine under windows 7-32 bit Satellite C660 PSC1GA-01E01M stuck in an infinite loop of BSOD.

  The lappy said that it was ok to upgrade to windows 10 so... Yes, I did.
  Now its stuck in a loop without end of BSOD.

  So I decided to use the recover option and reinstall windows 7 and then move from there.
  After mega downloads updates and finally got to the stage where there was no update on the left to get, so I decided to upgrade to windows 10 even once.

  Now stuck in an endless loop of BSOD again.

  Can someone point me to the driver who is a failure, I can get into SafeMode ok, Device Manager has 2 problems

  (1) is under OTHER DEVICES is an unknown device
  (2) is generic pnp monitor

  I tried from Toshiba Web site for updates of drivers for 32-bit windows 8 thinking this could be the best step but the links are bad and the page Web said sorry loser at home...

  Also no network, if I try to logging for the safe mode with networking, he returned to the screens of BSOD...

  HELP PLEASE

  Toshiba has released a list with all Toshiba models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Satellite C660 PSC1GA is not in the list, which means that this model is not supported to win 10 and will not get win 10 drivers.

  However the Win 10 must run on this device, because it meets the essential physical requirements.

  I guess the BSOD loop arise due to some drivers which are not entirely compatible Win 10 and probably these drivers must be removed before making the Win 10 update.

  To check the compatibility follow this procedure:

  • Right-click on the icon 'Get Windows 10' (on the right side of the taskbar), then click on "Check the status of your upgrade".
  • In the app to get Windows 10, click on the menu: (3 lines) and then click on "Check your PC.
  • Now you should see the list of compatibility issues

  Also this kind of problem could be fixed by Microsoft update, as mentioned in this article:
  http://www.Forbes.com/sites/amitchow...s-reboot-loop/

• Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

  Dynabook i7 3D laptop A660.

  OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

  Other wise works perfectly.

  It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

  When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

  I.E.
  If I press 1, 2, 3, its ok.
  But
  If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

  I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

  Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

  Any ideas?

  Hi Roger,
  My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

  I m wondering how you installed the 8.1 to win on this laptop?
  You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

  Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
  [Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

  In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
  When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.

• Satellite A210 - 127 (PSAELE) cut off and BSOD after the fresh install of Win 7

  Hello Toshiba Support Forums.

  I installed Windows 7 Ultimate x32bit 2 weeks ago and I have problems around him.
  The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  The problem is sometimes the laptop shutsdown itself and after I turn it back on it says blue screen and some other information you need, but I closed it.

  Also im gamer and sometimes when I play the game it shutsdown again. When I use Google Chrome or Firefox, the browser hangs and makes the pc of the room with her for at least 10 min. it is really bad and I also want to set.

  Also, I want to ask about memory card reader because I insert a card in the reader, but it does not work I think I need a driver for it but is not in the drivers Toshiba Web page.

  Thank you very much!
  If you need any other information that I will deliver to you order for ifx these annoying problems!

  > The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  Where did you find this ATi driver?
  It could be possible that the installation of this driver ATi the BSOD.

  My girlfriend has the same laptop Satellite A210 with an ATI Mobility Radeon HD 2400 graphics card. The driver version is 8.632.1.2000 and the laptop is preinstalled with Win 7

  It works perfectly without any BSOD.

  By the way: the cardreder works too... you could take a Vista driver or the driver put the A300 series too

• Satellite A500-1 - BSOD appears during the installation of Win XP

  Hello

  When I try to install Windows XP, it displays this screen on my laptop:

  http://img27.imageshack.us/img27/5498/img0159ni.th.jpg

  Greetings

  Hello

  I think that the BSOD appears because the Win XP cannot find the HARD drive due to lack of SATA driver.

  There are two solutions;

  (1) you need to add a SATA driver for Win XP (done SATA driver is part of the Intel Storage Manager)

  (2) or you need to set the Compatibility Mode AHCI SATA mode. This allows you to install the Win XP without the SATA drivers.

  PS: Option of job search Forum and you will find many discussions on this topic