T510 4314-2 and AT &; T Wireless WAN
When I purchsed this unit, I was under the impression that she had the ability built cellular broadband - maybe not needing to add a SIMM card.
Anything can confirm that it is included in this model and where SIMM card is installed (or must be installed).
This model is extensible WWAN, which means that you must buy the WWAN adapter, and of course, you need the SIM card. You need to remove the keyboard to add the adapter and fasten the antenna cables. The SIM location must be located behind the battery.
For models that is not extensible WWAN according to me, that he didn't is no built-in antenna so not cable antenna either. Also the location SIM could miss as well (not 100% sure of the location of the SIM).
-gan
Tags: ThinkPad Notebooks
Similar Questions
-
Wireless WAN T410 turns off after round approve 3 minutes
Hi all
I have a T410 with windows 7 32-bit company. The normal Wi - Fi connection and connection blue tooth are stable and works well. However it seems that Wireless WAN radio turns off after 5 minutes without worrying if I'm logged in or not. I have installed the dial-up connection program and reconstructed profiles with no luck. I also change the power management setting both in the Device Manager in Control Panel.
What else I can try.
Note This is for the mobile card radio.
Concerning
J
Hello guys,.
-
Hello
My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.
-I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:
"The drivers for this device are not installed. (Code 28)
Driver is not intended for this platform.
To reinstall the drivers for this device, click on reinstall the driver. »
Huh?
Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card. This driver has been installed from the following link:
http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999
Seems to me that it should work on this machine. What I am doing wrong?
-Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.
Help!
Thank you very much.
Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.
-
Win7 driver Wireless WAN (HSPA) driver for T400s
Hello
I'm looking for a driver for this device. On the pages of Lenovo, there is one, but it seems to be designed for Vodafone and AT & T. I use it in Norway and need a driver Generic. Can someone point me in the right direction?
Thorbjørn salvation,
don't worry everything what is called the driver, install it to get your card to work. The cards are not locked to Vodafone provider or AT & T. I saw loads of ThinkPads with journaling card in T-Mobile Vodafone, e-Plus...
the really important bit is;
"This package provides the Wireless WAN driver to activate the following adapters.
-Ericsson F3507g minicards Broadband Mobile Composite Device ".Hope this helps
-
Mouse and keyboard Microsoft Wireless Comfort 5050
Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC
With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel
My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.
-
keyboard volume and switch control wireless - HP Pavilion Entertainment Notebook
My volume control keyboard & wireless switch (to touch those at the top of the keyboard) has just left the other day of work. I can't understand how do I know if I disabled something accidentally or what. Reset did not help. The only thing I did differently this day was to connect my laptop via a cable and stops the wireless. (I usually work wireless).
Laptop HP Pavilion dv6-2157sb
Windows 7 64 bit
Thanks in advance for any help.
Hello
Problems with the capacitive band can sometimes be helped by doing a Hard Reset as follows.
Shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery, connect the power adapter and start Notepad.
Kind regards
DP - K
-
problems with a Probook s 4530 and earn 8.1 x 64 and card RALINK Wireless
Good afternoon
I have reported a problem with the installation of Win 8.1 Enterprise on a HP Probook 4530 s which has a RALINK RT3592BC8 wireless card installed. This card has the info printed on it.
Rev: 01:00
SPS:630813 - 001
Release date: 2011/05/21
Mac ID: 68A3C4BBD32E
CT: GBRFA00FK0M86K
SPS: 630813-001
HP part number: 629887-001
WCBN607RH-H1
THE COMIC BOOK ID: 68A3C48947BF
The laptop had already installed a copy of the company to earn 8 x 64. the laptop was working fine on this OS, however we migrate to Win 8.1 Enterprise but this laptop would never apply the inplace upgrade. We were trying to replace the older readers of 5200 RPM in laptops, and I bought an SSD 250 GB EVO 840, and as I was replacing the HARD drive, I also decided to install Win'a 8.1 x 64 business. The installation went well until installing Windows begins loading the drivers. Around 60% the error came that there was an error "irq not less or equal to". I checked the HARD drive in another machine and was able to install a business Win 8.1 x 64 on it, so I wiped the install and tried again. Failed a second time.
At this point, I thought that there was a device that Win 8.1 wasn't satisfied and as by chance the wireless card was easy access to the laptop so it was my 1st point of call. Installation went through after withdrawal of the wireless card and try again the installation of win, fine. I was also able to install our 2013 Office without problems and the 1st round of updates to victory. On the 2nd round, I thought I want to reinstall the wireless card, for cranking up the dreaded irq not less or equal to returned to the top and the machine was in a reboot cycle. During a start/stop cycles, I turned off and removed the wireless card and the machine very well.
It seems that there may be a problem with the card stock RALINK RT that comes with a HP 4530 wireless. At this point, I had to remove the card from the laptop, until I can find an alternative.
I see a lot of messages about the causing problems ralink drivers/device, but I can't seem to find the right driver to use for the x 64 bit 8.1 on a 4530 (map exceed the details) and what the correct procedure is to have this card works correctly for future upgrades of windows? can someone enlighten me please?
Thank you
Mike
Hi, Mike:
The only suggestion I can offer is to try the latest version of the driver Ralink W8.1.
http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_142231_1
If this does not work, I suggest you only replace the card wireless with one of those enrolled in the service manual has a better chance of working with W8.1, such as an Intel wireless card.
When I click on the support page for the 4530 s, I see only a limited amount of W8.1 drivers available which normally isn't a good thing about the compatibility of the device 100% with an operating system.
-
original title: can't see the computer on wireless internet!
I hope that's not too much detail, but I would like that the sequence of events to be clear...
I have a Dell desktop computer that's probably six or seven years now. It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software. It works beautifully.
Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities. I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver. No problems.
The Dell laptop is dead and the DLink receiver has not been used for a long time. Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard. Still no problem.
I got a new ASUS laptop, I also linked using the Windows Wizard. STILL no problem.
Now, here's the problem comes. I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box. Then I can connect correctly, but I don't see this computer on my wireless network. Bad luck... because I want to be able to access share files. When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.
So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows? I uninstalled the software of DLink, but it seems to have no effect at all.
BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7. I can see all the computers on the network with the exception of the original Dell desktop computer wireless.
Any help would be appreciated!
Hi Joe and DonnaLoth,
The network will have to be changed to allow the computer Windows XP join a workgroup.
You can also read the following article.
Networking of computers running different versions of Windows
-
Hi, I have re-installed Windows Vista on my laptop (dell insparon) 1525 and now my wireless does not work. ive tried re installing driver, but it says operating system not supported. I used the disc that came with the computer of the re install and I even tried to install service pack 1. .
original title: Wireless problems after install.I just tried both, the dell is one that says OS not supported"and the intel, it went very well, but my 'network controller' still have a yellow top thing in Device Manager. and I always wireless. any other ideas? Thank you for the help
Question... You have whatever it is listed in the "Network adapters" section of "Device Manager" now?
While ensuring that the exclamation point is not for your wired network device (plausible) or bluetooth (plausible) and you just need to configure your wireless network to connect to * your * wireless network now.
You may have to contact Dell to see why none of their drivers receive your wireless device works on the original operating system, what they included. This could be a hardware problem PURE.
-
Hi all
I have a problem and will apprecaite all the help I can get. I think I will find an answer here.
I have a small network, Linksys WRT350N (wireless router) attached to a modem and then connected to a desktop computer and with 3 wireless laptops connected to the router. All 3 are really great to work and access the internet very well.
Currently, I have the need to expand the network to 3 floors, so I bought 3 Points of access wireless of Linksys (WAP4400N).
I ran 3 cables CAT5e cable from the router and which ends individually all 3 floors, the top floor is less than the router 40meters. With the cables that came in their boxes, I connected the APs to the router and I have correctly set up the 3 Access Points with them attached to the router, all 3 works perfectly (I can access wireless internet via 3-point). However when I take the points of access to the upper floors and connect cables cat5e APs no longer work but connect after some time with the message "limited connectivity".
Why can I connect when the APs are connected to the ground floor via a short cable that came in the box and not when it is connected to put cables from the ground floor to the upper floors but rather make the "LIMITED SERVICE" message and cannot connect to the internet.
Also if I connect the cat5e cables directly to a laptop computer on all the floors, I can connect to the internet (the work of cables fine when connected directly to a laptop computer), but when it is connected to the connection of the APs has failed and I begin to see strange IP addresses from the APs.
Oh, one more piece of important information: when I connect cables CAT5e cable on all floors direct to a laptop I can connect to the internet (the work of cables very well when it is connected directly to a laptop) but when connected to the failed to connect APs and I begin to see strange IP addresses from the APs.
HEPL!
I think I have the forum a status report on my post. As I mentioned in my last post, the problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.
A Board here please be careful and make sure you complete the cable. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.
Network up to & operational: Linksys WRT350N router without wire + 3 Linksys Wireless Access Points WAP4400N + Modem providing access to (1 computer (cable), 6 workstations (wireless), & 5 laptops (wireless).) Network to grow shortly.
Thanks to everyone who helped make this project a reality.
-
Microsoft comfort wireless keyboard 1. 0 and 2.0 wireless optical mouse?
Which driver should I download for Microsoft wireless comfort keyboard 1. 0 and 2.0 wireless optical mouse?
Hi Edward,.
1. What is the number of exact model of your keyboard and mouse?2. you connect your keyboard and mouse for the first time?I suggest to follow the link and try to download the drivers for your mouse and your keyboard and check if it helps.If you have problems to connect your mouse and your keyboard, you can check the items listed below. -
I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.
Thank you
Jim
Lima, Ohio
original title: unable to print attachments from Windows Mail
Hello
The print job goes to the queue?
Method 1:
I suggest you through the Windows 7 steps in this document.Method 2:
Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference. -
My contacts and calendar sync wireless, how can I change this to do with outlook
Hello and welcome to the community!
- In the real Contacts and Calendar applications, check the options for them and make sure wireless synchronization is disabled.
- Then check the configuration of e-mail BIS ensure that also has many Contacts and calendar sync turns off.
- Finally, if your actual data are already completely in Outlook, you must destroy the databases on the BB and then enable synchronization with Outlook (who will first do a one-way synchronization, subsequently, it will be 2-way).
Good luck!
-
Connect a to a USB MS receiver Logitech K520 wireless keyboard and a MS Wireless Mobile Mouse 4000
Is it possible to connect a keyboard to a receiver USB MS Logitech K520 wireless and a MS Wireless Mobile Mouse 4000... all performed on a Toshiba Satellite L455 with Windows 7 Home Premium?
The wireless mobile mouse works, because she and the USB receiver are two Microsoft, but we would like to get the wireless keyboard to connect too.
The keyboard 'works' in that the green light... but only for six or seven seconds and then turns off. The keyboard passes no to the screen during this time, response.
Thank you in advance.
Roger Agness
# They are both two different and opposite manufacturers.
The K520 seems to use unique from Logitech Unifying receiver and Microsoft has their own receiver technology.
-
USB connection and another computer wireless
Can I connect the printer to a computer via USB and the other wireless?
Photonics wrote:
Can I connect the printer to a computer via USB and the other wireless?
Hello
Yes, but what sending 2 printing of 2 computers at the same time, the anti-piracy work will fail. In many cases, it will recover itself, but sometimes this is not possible.
Regars.
Maybe you are looking for
-
How to transfer a json file?
I got a new computer, and I recorded my favorites on a USB key. I need to transfer the json files to my new computer and Firefox Bookmarks. Please advise. Bob Burns
-
the popup tells me the web address in a small box that opens if I hold the pointer over a bookmark for more than a second or so and also told me the bookmark. its just tell me what I already know, its annoying.
-
How do I set up to see if anyone has read the messages that I sent to them. ?
-
HP1212nf scan to E-mail (Windows Live Mail 2011) does not
Printer: HP 1212nf MFP OS: Windows 7 Home 64-bit E-mail: Windows Live Mail 2011 Problem: Scanning for the utility using HP trying to document Scan to Email. Scan process works but when you have to open Windows Live Mail, it fails. in the application
-
Hi when I try to print to a printer network, the error message that comes is "the print spooler service does not. I tried run services.msc and reformulating the spooler but its still does not work, what should I do?