USB connection and another computer wireless

Similar Questions

• How can I connect another computer wireless to my counter top?

  Trying to connect to another computer wireless to my desktop for the internet. HOW?

  Hi KNoftz,

  You can follow these links and check if it helps.

  Set up a wireless network

  To connect to an available wireless network

  Hope the helps of information.

  Please post back and we do know.

• get internet connection through another computer...

  Hello

  I would go straight to the point :)

  I have a desktop running windows vista. I have a normal internet connection through a router that connects to the internet on this desktop computer.

  now, I also have a laptop with windows xp and here is what I do. my laptop's wireless was always bothers me, sometimes it connects, sometimes it doesn't work out... so I saw that there is an Ethernet card installed in the laptop with an Ethernet port.

  My question is this:

  I have a lot of Ethernet cables at home and I was wondering if there is a way to get internet to my laptop via the Ethernet port on my desktop, but without needing the desktop computer to be running, cause I only use my laptop these days and my router is too far to connect from my room. I hope you understand my problem. In theory, I think it's possible to do, but I'm not sure how, so please help me on this one. my laptop also has firewire, but I prefer ethernet for some reason any.

  Thank you

  Hello

  Sorry, but you cannot get a connection via another computer if the computer is off.

  I'm not sure that I understand completely the topology.  However, if the office is connected by cable to a router for Internet connection, you can solve the problem by buying a simple network switch.

  You take the cable from the desktop and connect to the switch. Then you plug the desktop and laptop computer at the switch.

  That this switch network does, it divides a cable to feed many computers.

  Example of a switch that can be connected with a cable to a router and feed 5 computers.

  http://www.Newegg.com/product/product.aspx?item=N82E16833166034-

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• connect to another computer in directory shared

  I have a valid IP and I want to connect to another computer (a valid IP) of shared directory

  Someone correct me if I'm wrong, but I don't think what you're trying to do is easily achievable.

  The best way to make documents shared between two computers is using some sort of cloud like Skydriveonline storage.

• you have been disconnected from gamespy, you have connected on another computer

  on fsx im having truble with lifting a session with a friend we can just connect to fly together and we always get connected to fsx as long as this message (you have been disconnected from gamespy, you have connected on another computer) also noticed that most of the flights free sessions are locked why? Dome one can help me solve this problem please

  Hello

  I suggest you follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/819836

  You can also follow the steps in the link:

  http://support.Microsoft.com/kb/303032

  If the problem persists, you can communicate with FSX (Flight simulator x) support for other assistance and may also post you your request in the Flight simulator community. Please visit the link to contact FSX (Flight simulator x) support for assistance:

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.flightsimulatorx.it/it/index.htm

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

• How to increase the processing speed by connecting to another computer via USB - USB cable

  Share laptop processing power. Windows 8, Windows 7

  Hello

  I was wondering if I could increase my processing power by connecting a portable alternative to mine via a USB to usb cable. If anyone knows how I would go to do that, or if it is possible I would like to know. I searched on google but not found all the answers.
  If this can help, my laptop is running Windows 8 32-bit preview developer, and the portable alternative is running as Windows 7 Ultimate 32 bit.
  Any help would be greatly appreciated.
  Thank you very much
  Mike

  Hi MichaelSenior,

  You will not be able to increase the power of a computer processing by connecting it to another computer via a USB cable or by any other means.

  In order to increase the processing power of your computer I suggest you check with your computer manufacturer to see if you can pass any hardware on your computer.

  Example: Increase the size of the memory on your computer or upgrading the processor etc...

  Hope this information helps you.

• I can't seem to Windows wireless on Lenovo laptop to recognize a USB connection and turn on the wireless radio.

  I use a USB connection to my mobile phone for my internet connection. I want to use wireless mobile radio to connect other devices, but the window wireless services does not recognize that I am connected to the internet. What can I do here, gurus?

  Hello

  Please contact Microsoft Community.

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.

  If the problem persists, proceed from the link below to fix this problem

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• Can I use USB connections and wireless on OfficeJet 6700?

  Only, we have installed a new Prime Minister to 6700 JO e-all-in-one by using the USB, one of our workstations. Is there a reason why we cannot set up wireless also, or do we first abandon the USB connection?

  I love the reliability of USB connection, but I would like to than others in the Office to use the features of the printer/scanner/fax too.

  Hi kreed,

  Yes, you can have the printer connected wireless and USB at the same time. Follow the document below to install the wireless printer. Have a wonderful day.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• Kodak M530's connection on another computer

  I have a Kodak M530 and used to use it with a Vista PC. This hard drive has been corrupted, so I use an XP now. I can't connect the old camera to the computer 'new '. When I try to upload my pictures, I always get a message indicating that the device or the scanner is busy - try again later.

  How can I use the camera with another computer?
  Thank you
  Terri

  I have a Kodak M530 and used to use it with a Vista PC. This hard drive has been corrupted, so I use an XP now. I can't connect the old camera to the computer 'new '. When I try to upload my pictures, I always get a message indicating that the device or the scanner is busy - try again later.

  How can I use the camera with another computer?

  Thank you

  Terri

  ====================================
  Just some thoughts...

  Personally, I think that the best method is to use a USB
  media player with memory card from the camera.

  Something to try...

  Connect the device to your PC via a USB cable and turn
  on the camera... If open windows... Close them.

  According to... to... Start / my computer... the camera can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / desktop media slots...
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Also... you can try to start the scanner and Camera Wizard:

  The executable for the scanner and Camera Wizard is:
  wiaacmgr.exe

  If you connect your camera via USB / light / and go to...
  Start / run... and type or copy / paste the following and press on...
  Enter... must start the wizard:

  C:\Windows\System32\wiaacmgr.exe

  Aside from that... maybe your AutoPlay settings must be
  adjusted... the AutoPlay repair Wizard may be worth a try.

  Microsoft AutoPlay Repair Wizard
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

  More info...

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

• When I connect to another computer, office, I can't access my favorites. Only available bookmarks are the other owners of computers.

  If Mozilla is server-based, why are my bookmarks/favorites not available when I connect to my account? Thanks for any help!

  This must be provided. Firefox is not based on server it is installed on your device.

  It is possible to synchronize the devices using Firefox Sync, but it is not appropriate if you use someone elses computer.

  You might consider taking a copy of your bookmarks with you or placing them available somewhere on the web (or on a medium such as a memory stick).

  • Use bookmarks HTML
    • Export your bookmarks as HTML. Open this file with Firefox. Try it first on your local computer.
    • See Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
    • Noticing no need to import the file it will be readable in Firefox. It is not not searchable from the address bar or bookmarks manager, but it should be a useful list of usable and searchable.
  • Use a Firefox profile on the other computer.
    If you have Firefox installed and the permission of the owner of the other computer (it can be your own additional machine), you will be able to synchronize or migrate the profile details, including bookmarks. Or just restore a set of bookmarks from the other machine.
    • See How can I set up Sync on my computer?
      Profiles - where Firefox stores your bookmarks, passwords and other user data
      Backup and restore Firefox profiles information
      Restore bookmarks from a backup or move them to another computer

• WANT 5540: usb connection and instant ink

  Waiting for the delivery today of ENVY5540 printer. You want to install on wired network via USB printer and also enjoy the option of instant ink. Is this possible or do I have to configure the printer to connect wireless to the router?

  Hi @daveydd

  I think that you don't need to leave the pritner on permanently.

  In fact, when printer is turned on and connected to your home network, whenever it prints, the printer will count pages to the subscription type.

  If you do not have instant ink service after the trial, don't forget to terminate service scared you get charged for the subscription!

  Enjoy!

• to connect to another computer in the same room

  How can I connect to the computer in the same room, I have broadband and use an adapter to run two computers. I want to be able to see what's been done on the other computer

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  You can also configure an ad - hoc network that looks to use the cable above in that it
  only connects the two machines directly however by wireless.

  Do you already use a router?  If so you can network through it.

  ====================================

  You can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I make windows 7 see dial up 3G usb connection and WiFi at the same time?

  When I connect to 3G, he cannot see the wifi and there is no solution to bridge between the dial toward the top and wireless lan.

  Hello
  Welcome to the Microsoft answers site.
   
  It is not possible to connect dial-up connection usb 3G and WiFi connection at the same time.

  For more information, you can contact the manufacturer of your 3G device.
   
  Let us know if you have any questions.
   
   
  Thank you and best regards,
  Azam - Microsoft technical support.