T510 540 m

Similar Questions

• Taken SSD Intel SSD 540 s M.2 supported by the MacBook Pro 13 "retina end? 2013 (11,1)

  You have all the information if the new series of SSD INTEL 540 s 1 TB m2 will work with a MacBook Pro 13 "retina end? 2013 (11,1)

  Intel said it does not support NVMe. Should or would add just performance gain?

  I discovered by the research so far it is not supported. According to the information that I had any player should of NVMe or OS X will not accept or even boot from it.

  If someone have different information or the best life experience - I'd be happy to hear...

• HP jornada 540 Pocket PC

  Hello

  I'm Kara, Bangalore, India. Long back my cousin I gifted a hp jornada 540 series pocket pc wearing a PN product number: F1798-80201 to Singapore. Now I want to use the memory card in the slot for card (Compact flash - Type I) but I do not know what card I should buy because so many cards (CF, SD) are available with the speed and different memory size.  I think that this PDA will not more than 2 GB, support if she please give me the correct card with configuration that supported my PDA.

  At my PDA

  Hitachi SH3 processor 133 MHz
  Windows CE 3.0 operating system
  16 MB of RAM, 16 MB of ROM memory

  Map of Dimensions 43 x 36 x 3.3 mm (Type I)

  Advise please thanks in advance by Kara

  Hello Morgan, welcome to the HP support community.

  I spent almost an hour trying to find a definitive answer for you, but can't seem to find it!

  I read messages telling you can use up to an 8 GB card, a 4 GB card and all the way down to one card of 32 MB...

  Messages that talk about using a carrier of CF that can hold a SD HC card.  Messages that say you can't use a SD HC card!

  If it was my camera, I would try a safer size about 2 GB...

  WyreNut

• Error sending image to zero smart t510 HP spot

  So we have an image t510, we have configured, based on the image of T6X42019 ThinPro 4 most recent of HP. I used HPDM 4.5 to capture the final image, and it works very well to expel this image to any t510 race ThinPro 4 already. However, if I try to send the same hardware, running HP Smart zero Core, it fails with the error below. I want to be able to send this image to all t510 connected to the HPDM or running the other operating system. Someone knows what's the problem?

  2013-02-12 15:55:18 sent special to the device management gateway

  2013-02-12 15:55:19 task has been retrieved by the Agent.

  2013-02-12 15:55:21 image for deployment using master repository repository.

  2013-02-12 15:55:21 failure deployment 2-2 - 2013.dd.gz/Repository/Images/t510_2-12-13.

  2013-02-12 15:55:21 DOES NOT SUPPORT!

  2013-02-12 15:55:21 the common task cannot run.

  2013-02-12 15:55:21 ErrorCode: 14000052, detail of error: unsupported task.

  2013-02-12 15:55:21 the common task cannot run.

  2013-02-12 15:55:21 ErrorCode: 14000052, detail of error: unsupported task.

  Error message (task not supported), sounds like agent on Smart zero is not up-to-date. If you don't the have not already done so, wil you update the agent on the t510 Smart zero prior to sending the image update task.

• HP t510 and t5565z black screen

  Hello

  I have several HP t510 and t5565z thin using HP Smart Client OS we use for VMware View customers. Thin clients for very well most of the time. However occasionally they will get black screens and no longer respond. I would say that this probably occurs during long periods of inactivity may be several hours or more. Has anyone already experienced this? It can occur during a session connected or simply sitting lit all night.

  These thin clients also seem to have a kind of construction in both screen saver. Because they will go in this black screen after 15 minutes of inactivity. They return generally, but I can't find anywhere in the settings options or BIOS to kill this screensaver.

  To anyone reading this, I found a solution. I found myself by opening a ticket with HP about the sleep function screen integrated with Smart Zero Client generation. I was information this feature was not available without the component of profile manager of the HP Server deployment, you can use this thin client.

  I finished the switch back on the ThinPro build because you can control the screen saver and display the power options in the generation of HP. I had a feature request to HP to allow the screen saver and power display options to be greeted with the Smart customer zero built in the future because they added an Admin mode in the last generation, they pulled out for us who do not have enough of them to justify the use of the server component.

• Tecra 540 - BIOS upgrade?

  I am the owner of Tecra 540.
  Details:
  Tecra 540CDT/4.0 system UNIT; Z7013615 model number.

  I just downloaded the latest BIOS for this notebook (bios - 20071126170622.zip)

  Two files inside:
  CHGBIOSA. EXE
  BIOFCE7T.COM

  Now I'm looking for a way to Flash the BIOS. This machine has a floppy but CD player.
  I was looking at the Toshiba site where 'How-to' for upgrading the BIOS is described for one of Toshiba laptops, but not my :(
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  Can you get it someone please let me know what steps I have to upgrade the BIOS more recent?

  Hello

  On the page of the driver Toshiba Tecra 540 section, you will find two packages of BIOS.
  A package 8.00 - TRAD BIOS contains an exe BIOS Tecra 540 and some pdf documents that described how to upgrade the BIOS.

  In addition the document FAQ Toshiba + how to upgrade the BIOS on my Toshiba laptop and where can get the latest version of the BIOS for my machine? + provides a step by step instruction.

  Please check this last point * the 7 BIOS upgrade procedure *.

  It is said:
  For all models except those listed in the procedures (1, 2, 3, 4, 5, & 6)
  So if your model is not in the procedures at the beginning then you will have to use the last procedure 7

• Driver WLAN for Satellite P10-540

  Hi friends...? use a satellite p10 540... the problem is any wireless lan driver? cannot install it from cd and the toshiba site... when? try to download it, there is a failure... it says that:

  drver was not updated!
  ? NF file is invalid or incorrect
  ? sntallation failed

  Press the keys to cont? naked...

  That's all folks... Please help me to install the wireless lan driver...
  my email address is [email protected]

  Thanks in advance

  Hello

  If your device comes preinstalled with recovery CD you n t need any update of the driver. Wireless card in Device Manager and reboot the device. After reboot, wireless card should be detected and installed automatically.

  What kind of problem you have with the wireless card?

• Can I change T510 customer Flexible with Smart zero OS to use thin Pro?

  Hello world

  I have a small batch of T510 Flexible with zero operating system Smart customers on them, I would like to know if it is possible to Flash the BONE thin Pro on these devices or not. We were given these devices by a partner organization, we work with, unfortunately the intercept devices with Smart zero rather than thin Pro.

  Thank you
  Chris

  Download the following from the following link

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5226832 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_125701_1%257CswEnvOID%253D4030%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Please follow the instructions below to create the bootable USB media.
  Step 1: Insert the USB key into any desktop or laptop computer (to create the bootable USB support)
  Step 1: Download the file in any location in the computer.
  Step 2: right-click on the downloaded file and select "run as Administrator" to run this file instead of simply double-click this file.
  Step 3: executing the file you can see a box with 4 options, please select format USB these options (ensure that a USB key is connected to the computer)
  Step 4: Once the bootable USB support is created successfully, the name of the USB media will change to "thin State".
  Step 4: Remove the USB drive and start the client using this USB key and follow the instructions.

  ====================================================

  Although I am an employee of HP, I speak for myself and not for HP. ===

  * Click on the star of CONGRATULATIONS on the left say "thank you."

• HP DesignJet T510: HP DesignJet printer cartridge faulty reports T510

  Hello HP,.

  I have a HP DesignJet t510 giving faulty cartridge error.

  I changed all the cartridges but still does not work.

  I need help to solve the problem.

  Thank you

  John

  Supplies of Havilah
  P. o. Box 185 AM
  Amasaman, Accra
  Ghana
  Te: 00233208433199

  This is the old method that is still used with some inkjet home printers.  Printers Designjet need much ink, so the current design of the print head filled by Assembly of the tube and large ink tanks is common for all designjet printers.  You don't like the design, but it is more economical because the printing heads last longer than ink.  You will have to pay more for ink cartridges that contain the printhead.  Your argument is outdated.

• Can not handle t510 with ThinPro HPDM v4.6 sp2 v5.0

  We have recently updated our HPDM in v4.6 with SP2 and it seems to work perfectly.

  We have one of our customers light t510 upgrade then ThinPro v5, which went well, but now we cannot see or manage HPDM device!

  I hope that this is just an oversight on our part, but anyone can shed some light on what to do to manage the customer updated please?

  Tuned for the moment

  Russell

  I managed to navigate to the file/usr/sbin/but when I run the command hpdmagent I get a "error while loading shared libraries: libdmerrhandle.so: cannot open shared object file: no such file or directory".

  I'm afraid I'm not familiar with the Linux command prompt, etc so do not know how to get the log for you.

  I'll try to reinstall ThinPro 5 on the device to see if that helps.

  Tuned for the moment

  Russell

• T510 default factory reset

  I need to reset a T510 to factory default because he doesn't know the administrator password. I tried various passwords by default, but none of those who work. I don't see an option, reset. Does anyone know how to reset to factory default?

  Please try these steps again this could help you this time:

  1. download the file of the operating system

  2. right click on the file and select "Run as Administrator" [this step is not in the manual]

  3. now, select "Format USB" under deployment options

  4. Select the USB in the list, with the top and down arrows to display the drive letter correct.

  (If the USB does not appear in the list, click on update readers, then scroll down again).

  NOTE: In the next step, the USB drive is reformatted and all data thereon is erased before starting

  image is copied into it. To avoid data loss, make sure you have saved all data from the USB

  on another drive.

  5. click on Format to wait until it finishes formatting

  6. remove the Bootable Flash drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  "I work for Hewlett-Packard.

  Click on the 'Purple Thumbs Up icon in the lower right corner of a post' to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Kind regards

  K N R K

• HP T510 - remove DESKTOP connections the connection with the HP Device Manager Manager remotely

  I can manage, deploy, and send registry updated successfully to all HP T510 customers on my network via HPDM.

  When deploying a RDP connection is successful, but it added the new connection in the connection list.

  I was assuming that other connections would be withdrawn when the deployment of a record of a customer with the correct setting - but the new connection is just added to the existing list of RDP connections and I need to delete the other.

  Please could someone advise me how to remove DESKTOP connections remote connection using HPDM Manager screen.

  I found it! the option delete isn't available when deploying new connections - it's a checkbox at the bottom of the wizard

• HPDM 4.4.1 T5530, T5540 and T510

  Hello!

  There are some known issues with HPDM 4.4.1 and material subject? Do the wes7 image the same way as I do with winCE image? I could run a winCE on T510 image? Are there issues about with mixing these customers with this version of HPDM?

  Kind regards

  It's a licensing issue, if you bought the t510 with WES 7, you can't put this on it and vice versa.
  
  The latest version of WES 7 and the t510 are only supported with HP DM 4.5 MS-2, but it does not support this so you would need 2 HP DM Server to use two different images.

• T510 Citrix FontSmoothingType configuration changes not saved

  Hi all

  We recently bought a T510 because our existing customers (T5565) are now EOL, and we try to configure the T510 with similar parameters.  One of the parameters that the FontSmoothingType change us is in the file All_Regions.ini located in writing/home/user /. ICAClient.  However, the changes we make are not persistent after a reboot.

  That's what we do:

  fsunlock

  CD/writing/home/user /. ICAClient /.

  VI All_Regions.ini

  (Change FontSmoothingType = * to FontSmoothingType = 3)

  : wq

  fslock

  After the reboot, the file All_Regions.ini has been restored and the timestamp of the file is more recent, which suggests that the file is overwritten when starting.

  I can't find any other copy of All_Regions.ini which could be a version of "master".

  Hoping someone can help.

  OS: ThinPro 4 (T6X42019)

  Martin

  You must change the All_Regions.ini in/usr/lib/ICAClient/config. This change should be persistent.

  Concerning

• [T510] Unexpected shutdown

  Hi all, new to this forum.

  I just bought a 4313CTO T510 and it was delivered today.

  One problem, she randomly, quit unexpectedly.

  Don't install anything on this subject yet.

  When I start up after it stops, windows does not recognize a power failure. And starts normally.

  When I'm in the Windows operating system and presses ThinkVantage, it starts the scan and stop just once again, or rather just power.

  I am really frustrated right now.

  Ask yourself what the problem is that I can't yet begin possibly run ThinkVantage.

  Also is there a solution to this?

  Thank you.

  I finally find my motherboard replaced... If the problem is resolved, but when I came back, I had to reinstall the whole system again.

  But my best suggestion is that you ask them to get a new computer.

  But call lenovo instead of lenovo customer service sales on the web...