None of my games will install properly on my Windows 7 64 bit.

Similar Questions

• the kingdoms of amalur recnocking game, I installed on my pc windows 7, it won't open in my system and my friends

  the kingdoms of amalur recnocking game, I installed on my pc windows 7, it won't open in my system and my friends

  Hello

  1. what exactly happens when you try to open this game?

  2. you get any error message?

  Check if the game is compatible with Windows 7 from the following link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  If the game is not compatible with Windows 7, then I suggest you to install the game on Windows 7 by choosing the level of compatibility:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Note: Also I suggest you to check the system requirements with the Publisher of the game.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• I'm unable to install 31.1.2/Windows 7 64-bit Thunderbird lightning calendar

  I'm unable to install 32.0.3/Windows 7 64-bit Thunderbird lightning calendar.
  My original calendar disappeared earlier during an update.
  I tried to download lightning - 3.3.sm+ CT - windows.xpi, but every time I try to run it, it only adds the file as an attachment to a new email.
  Can you help me please?

  Problem has now been solved by another thread.
  Apparently, you will need to use the 'Speed' icon to install it. I didn't know the machine had nothing to do with him, but have used I am now running.
  A big thank you to all.

• Help! Could someone tell me the orders to install drivers with a Windows 7 64 bit on T400 own?

  Help! Could someone tell me the orders to install drivers with a Windows 7 64 bit on T400 own?

  Appreciate for any help!

  The standard response is to install ThinkVantage System Update and let it pull down and install the proper drivers and apps:

  ThinkVantage System Update

  Z.

• Is it possible to install printshop 23 with Windows 7 64 bit?

  Is it possible to install printshop 23 with windows 7 64 bit. The dialog box does not appear again and I have to navigate to AutoPlay, and then to run setup.exe, but nothing happens after that. Not too technical solutions.

  Original title: The Printshop 23

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/printshop-23-compatibility-with-Windows-7-64-bit/f34fd7af-F9DD-460c-8AC5-eaaac3b031cc

• I installed on a desktop Windows 7 (64-bit). I installed the relevant (hence HP inform me) driver for a HP 1022 printer.

  I installed on a desktop Windows 7 (64-bit) and a HP1022 laserjet connected via USB.

  The motherboard is A S Rock 760GM-GS3

  I installed the good Win 7 64 bit driver (according to HP - IE lj1018-1020-1022-HB-pnp-win64-en.exe).

  I tried to print a jpeg file, but no printing occurred, however if I create a simple message test in WordPad it prints some time later.

  The print queue seems to form OK (visible through the Panel, devices and printers), but the printer does not print.

  I need to know what I should be looking at in Windows (or other) to correct problems - any offers on plausible solutions?

  Thanks a lot of impatience.

  HD

  Hi Michael,

  I would be grateful if you could answer the following questions:
  1. you receive an error message when you try to print the JPEG file?
  2. this happens with all JPEG files?

  Here are a few troubleshooting steps that you can try to solve this problem.
  

  Method 1: Let's run the printer troubleshooter.

  Refer to this link:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

  If the method above does not work, proceed to the next method.

  Method 2: You can also try to change the format of JPEG image file and see if you can print. You can read the following steps to change the type of file in JPG format.

  a. right click on the file type.

  b. click on rename.

  c. replace the extension .jpg or .jpeg

  d. and then try to print.

  After completing the methods suggested above, answer us with the State of the question.

• My Virgin Healthmiles GoZone pedometer will install properly (error of the driver)

  Operating system Windows 8 (64-bit)

  I installed the GoZone software (which I don't think that contains drivers) and it runs at startup, but when the pedometer is connected via USB, it will not install the drivers correctly.  I can see the pedometer in my devices window, but the icon is the warning of Exclamation symbol and says he is not properly installed ("pilot error").  Convenience store running only re - installs the same drivers and cannot remedy the problem.  I also tried remove and reinstall the GoZone software several times.  Someone at - there no possible recourse?

  I have a Surface Pro 2 with a USB 3.0 port.  I would like to connect the pedometer, he would do a tone indicating that he was plugged in, but it show up under devices with an exclamation point "driver problems" and I was unable to download my step and it does not automatically connect on the Healthmiles site.  I unplugged the USB 3.0 port pedometer and plugged my USB 2.0 no power into the USB 3.0 hub.  I plugged the pedometer to one of the ports on the USB 2.0 hub and it worked!  He was detected and I could download my steps and automatically connect to the Healthmiles Web site.

• How to install a game of Pandora's box on windows vista 64 bit?

  Hello! I bought this pandora box game in 2000 and since then they have played in my old computer. now, I have the top of the tower with windows vista 64 bit and I can't install it. What should I do?

  Hello

   
  You receive an error message when you try to install the game?
   
  Method 1:

  You can check the game manufacturer's Web site or contact them to check the issue with compatibility.
   
   
  Method 2:
  You try to install the game in compatibility mode and check. Check out the following link to install the game in compatibility mode.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
   
  It will be useful.

• Games will not be open for windows xp?

  Why the habit of the GAME window open for me? It is said that the shape of games is for windows 7, I have windows xp, how to find the right connection for windows xp?

  Hello

  ·         What are the games that you are trying to play on the system and what type, online games or installed games?

  ·         If it's an online game then, are what website you trying to play the game from?

  ·         What is the exact error that you are experiencing?

  ·         Have you been able to play the game before on the system without any problems?

  Please provide details so that we can help you in a better way.

  If you try to install and play the game that is not compatible with Windows XP so, I suggest you to check the below link.

  How to troubleshoot program compatibility issues in Windows XP

  http://support.Microsoft.com/kb/285909/en-us

• Why am I being asked to be "Administrator" when I am the only user and administrator in the Panel, so it will install my programs in Windows 7 Ultimate 64-bit?

  I've updated for Windows 7 Ultimate 64-bit.  Now, I'm trying to install my programs (again!) he continually says: «the installation program has sufficient privileges to access this directory...»  This installation cannot continue.  Log in as Adminisitrator. »
  I am the administrator.  There is no one else.  Control Panel says I have administrator privileges. How can I get around this to install my programs will install?

  Have you tried to do a right click on the file and selecting "run as Administrator"?

• CS6 will install and run on Windows XP Service Pack 2

  We no longer seem to be able to deactivate/activate CS3 on our system. I assumed that this is to do with our network or firewall settings.

  As an alternative, I have watched the replacement of our licences of CS3 with CS6 long but note that the requirements in Service Pack 3 on XP.

  It will install and run the Service Pack 2?

  Adobe has never taken care of XP 64-bit. You try to run software designed for XP-32 bit SP 3 on 64-bit XP SP 2. With Microsoft, abandoning all support and updates for XP in the following months, it seems that the right time to upgrade. You try to run the software CS 6 will be an exercise in soymeal.

• Install HP fails under Windows 7 64 - bit for Printer series CP1020

  Hello!

  I tried to solve this for days, and I've seen a lot of suspense/unresponded to messages about the same topic so I hope that someone sees this!

  Product & number: Color LaserJet CP1025nw CE914A

   

  Operating system: Windows 7 64 bit

   

  Error message: HP LaserJet Installer has stopped working

   

  Changes made to the system before the error occurred: We have updated our info from the router, so I ran the installation disc to reconnect the printer wireless. He uninstall programs initially added to the sleeve of the printer.

  Details:

  -Very well, so 3 days ago we updated our router SSID and password for security reasons. Apparently, there is no easy way to update the details of the network for the CP1025nw so I had to run the installation disc. It prompted me to uninstall the software, reboot, and reinstall. I scoured the guests and then choose 'connect via a wireless network. After searching for the network, I then choose 'installation of Wireless USB '. I have to connect the USB cable when prompted, and as soon as the installation of the drivers I get the Windows error message posted above.  I've attached a screenshot of what appears as well.

  

  Frustrating is that the printer still works after the installation, but only via the USB connection. I need to get wireless working again, but without the software installation work, I can't seem to get there (unless someone knows a hack/work around).

  Event Viewer provides the following details about the error in the application:

  The failing application name: hpbcsiInstaller.exe, version: 1.5.6.4020, time stamp: 0x4bbf9f17
  Name of the failed module: hppccompio. DLL, version: 1.3.0.24, time stamp: 0x4c9685d0
  Exception code: 0xc0000417
  Offset: 0x000073bf
  ID of the process failed: 0 x 970
  Start time of application vulnerabilities: 0x01cdbc45b6632fa1
  The failing application path: D:\Installer\hpbcsiInstaller.exe
  Path of the failing module: C:\Windows\system32\hppccompio. DLL
  Report ID: cb4d353b-2839-11e2-be7e-002564531498

  I tried a wide range of solutions and none of them does not seem to work. Everything from the firmware update, delete all instances of files HP, including .inf files, installation with startup programs and services as the basis because they can get, etc.

  Help, please!

  See you soon,.

  Kirk

  Okay, well that was a beast of a problem to say the least. I am so relieved to be done with this nonsense.

  How it all started - a little recap:

  We changed the password on our wireless network we have updated for security reasons.  I could not find all that helped me update the details of the network (password or the SSID) directly on my printer and said all that I had to uninstall and reinstall everything (and re - run the wifi via USB connection). This is not the case - there is a much simpler solution that I have will cover also the end of this post. Anyway, as mentioned above, during the phase of the installation of device drivers, the installation program plant with the Windows message "HP Installer Setup has stopped working".

  How I fixed it:

  1. print a configuration page by pressing the button "resume" for a few seconds and let go. I have taken note of the following in the upper right:

  Status: Not connected
  Network in use: no
  IP address: 0.0.0.0

  I myself am continued to ask me if I could connect the printer directly via the port ethernet so I...

  2 connect a cat5 from my laptop to the printer.

  3 printed a second Setup page. Now, I got the following information:

  Status: connected

  Network in use: Wired

  IP address: 169.254.71.50

  4. I opened my web browser and tried to 169.254.71.50, but the page wouldn't connect. I recently built a computer game and has found a way to bridge the internet from a laptop wireless to a wired device (http://www.youtube.com/watch?v=96Z1_6rX5qU) so I was wondering if this could work with the printer.

  5 filled my network connections and wireless according to the video above.

  6a open my web browser and once more tried to navigate to 169.254.71.50 and it WORKED! (Not sure if this IP address is unqiue for my printer, but printing a configuration report is the best place to find it.

  7. I clicked on the Networking tab and then select Wireless Configuration.

  8. from there, I was able to activate my wireless connection, my password wireless update and choose I wanted to connect to the wireless network! This is how you can update your wifi information without having to do a complete reinstall!

  9. I now unplugged the ethernet cable (as suggested next to turn on/off radio buttons. My printer wireless power and is light stayed on. I have now connected once again!

  10. I don't think it was a crucial step, but I also implemented printing mobile ePrint

  11. I printed another page of configuration and can now see the following:

  Status: connected

  Periphery in use: wireless

  IP address: 192.168.1.115

  12. I can now navigate to the printer in my browser using this IP address and was able to find and print on my printer wireless through my phone, but still couldn't print from my wireless laptop.

  13. I inserted the original installation CD, held my breath and clicked on install. Hold your breath here is optional.

  14. He asked how I wanted to connect, and as before, I choose wireless. This time, instead of asking me to connect the USB, it FINDS my printer on the network. I chose this, clicked on continue and all installed successfully!

  Everything is now back to normal! I can use my wireless printer once more. Please let me know if anyone has additional information on the steps above need, or if something does not work for you because there is no other solution out there. Believe me, I spent HOURS AND HOURS to research. I hope this helps some of you!

  See you soon,.

  Kirk

• Cannot install drivers for nothing - Windows Vista 64-bit

  I have a laptop Dell - Inspiron, with Windows Vista 64-bit. I just bought a HP Deskjet 3054 A multifunction printer and my computer will not install the drivers.  I had a Canon printer and had removed all software before you try to add the HP.  I even tried to reinstall, and each time to get a message to both say he is unable to install the drivers.  I currently have a windows update waiting for an update for the processor intel and it also will not be installed. This problem does not seem to be specific to the device, but rather a problem with Windows Vista and after reading a lot of discussion seems to be common.  But I still have no idea how to fix this.

  Have you tried to delete the file INFCACHE.1? Deleting the file INFCACHE.1 will force Windows to rebuild the file INFCACHE.1 next time window is looking for drivers.

  See this link:

  Windows Vista / USB device detection issues
  http://www.thedave.ca/geek/Windows-Vista-USB-device-detection-problems/

• Why can´t I make my scanner AGFA SNAPSCAN 1212U work properly, in my windows vista 32 bit

  original title: why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Hi Søren benaceur

  
  You have compatible installed the drivers for the scanner working properly?

  There don't seem to be compatible drivers available for the scanner to work with windows vista. I suggest you try to install drivers available for windows XP in compatibility mode on Windows Vista and verification.

  http://static.Agfa.com/digicam_scanner_drivers/scanner/snapscan_1212u/index.html

   

  So to work around the problem, try to install the drivers for Windows XP in Windows Vista compatibility mode and check if you are able to solve the problem. Compatibility mode may or may not work depending on the specifications of the device.
  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists while you can contact the manufacturer for assistance without a driver, the device may not work properly. Also, pilots can only be provided by the manufacturer of the device.

  I hope this helps.