T510: Thinpro 4.4 to 5.2 upgrade

Similar Questions

• ThinPro issue with wrong overlay Textcursor in XenApp Windows

  Hello

  Text selection cursor is not displayed when connect us to our Citrix server on a t510 ThinPro 4. Here is a picture of the problem:

  http://ImageShack.us/a/img259/2844/fotoyhg.jpg

  We tried to affect CursorStipple ffff, ffff and XRender handicapped for the ICA Client, but without success.

  We hope that you can give us a clue!

  Concerning

  After a few weeks on tier 3 support, here is the solution:

  Set the cursor from text selection to beam_r.cur in mice of Windows. You must do this for each user through settings GUI or a registry key.

  Concerning

• Can not handle t510 with ThinPro HPDM v4.6 sp2 v5.0

  We have recently updated our HPDM in v4.6 with SP2 and it seems to work perfectly.

  We have one of our customers light t510 upgrade then ThinPro v5, which went well, but now we cannot see or manage HPDM device!

  I hope that this is just an oversight on our part, but anyone can shed some light on what to do to manage the customer updated please?

  Tuned for the moment

  Russell

  I managed to navigate to the file/usr/sbin/but when I run the command hpdmagent I get a "error while loading shared libraries: libdmerrhandle.so: cannot open shared object file: no such file or directory".

  I'm afraid I'm not familiar with the Linux command prompt, etc so do not know how to get the log for you.

  I'll try to reinstall ThinPro 5 on the device to see if that helps.

  Tuned for the moment

  Russell

• Upgrading CPU for T510 please help.

  Hello!

  So I have a thinkpad t510 laptop, with a fairly low i5 520 m. I was wondering if I would be able to upgrade my current CPU with a more powerful i7 (quad core) 2760qm because the they share the same socket pga988/G1.

  N ° the 2nd generation of CPU will not work on a 1st gen (T510) motherboard.

• Upgrade SSD or hybrid to my T510

  Hi all

  I am considering upgrading my hard drive to my old T510 to 2 years since my original 300 GB drive fills

  I am considering getting an ssd or a Seagate hybrid drive, but I'm not sure.

  I want a faster startup time and improved performance. Right now it takes more than a minute to boot the system and sometimes seconds to load a large multimedia site. However, I also need big storage because I need a windows and linux dual system and a little store a few movies and a lot of music in the laptop. Because I don't want to replace my DVD with a second hdd, I hesitate between the SSD and hybrid.

  I was wondering if any of you have tried the hybrid drive on Thinkpad. How does perform? And anyone who tries it with a dual system? I'm a little worried the dual-boot will mess up with the ssd 6 GB limited is part of the hybrid drive, since it is so little space for both systems and management becomes much more complicated with two totally different file system.

  Also if I would go with an ssd, any recommendations? I looked at Samsung 830, Intel 520 and Crucial m4, all are good, but the problems that they are all SATA III, while my T510 support only SATA II. A bit of waste. But all the SATA II ssd seems just outdated and with older technology.

  Thanks a lot guys!

  fredhdx wrote:
  Thanks for your message and advice. You need a very good point about the controller improved on the new version of ssd and an option of DVD - RW replaceable hot to install a secondary hard drive. Can you explain more about the replaceable option hot? I know that the DVD player, but do you need to buy something like a ultra-baie adapter for the hard disk?

  Yes... need you the ThinkPad Serial ATA Hard Drive Bay adapter III.

  The reference is 43N3412 detailed here. More information about the adapter here (PS: photo shows one IDE connector that is false.) Someone needs to update this image).

  The Bay adapter is hot in that you can safely remove the material at any time & eject your T510 adapter using the physical button under the chassis. I like the provision of better eject buttons on the first series of T.

• Win7 for Win8 inplace upgrade fails on T510

  We try a Windows 7 Professional upgrade of Windows 8 using the installation Windows 7 running routine to maintain the applications and settings. The machine is a T510, 8 GB of RAM. The installation Gets the compatibility check, and then States that he cannot continue until the Lenovo Auto Scroll utility is uninstalled. Recognizing that reviews causes the Setup program to the end.

  Automatic scrolling of Add/Remove Programs uninstalling has no effect, even after rebooting, as suggested. I also tried to install the latest (compatible Win 7 and Win 8) auto-scroll. That does not work. Others said they have not obtained that it works after you have uninstalled all THE software Lenovo machine. That seems excessive. Is there an official upgrade guide that includes dealing with this issue?

  Check the special interest of Windows 8 discussion in the community of Lenovo. There is a specific section of the material.

  You can find answers here and there was a guide to prepare the installation of window 8 of.

• 4.6.3610 imaging of the failure of 5.0 t510 HP ThinPro HPDM

  I am struck the wall here, I can't understand why I can't image my peripheral t510 HP. I get the error message below. 'Image Operation Failed' - I can't know all the more verbose errors to go off of. Any help?

  

  Hey guys, found the question. This is because the account used for "anonymous" authentication did not have access to write to the repository. Add an account here, went around:

  

• T510: upgrade SSD

  I intend to replace the HARD drive in my T510 with an SSD, because the SMART test is only imminent mechanical failure. After traveling through SSD drives, it seems that the Samsung 840 Pro is the best. Is this compatible with the T510?

  Note that I replace the main HARD with her drive.

  Further reading:

  Endurance of TLC

• Upgrade memory T510 problem

  My machine has 4 GB installed when I bought it and I tried to add more than 4. Bought the module directly from Lenovo for my model. Slot under the top of the notebook was empty, so I installed there, I haven't looked under the keyboard. The unit keeps restarting via the boot sequence. Gets to the point where the windows logo appears, then restarts. When additional memory is removed, it works normally. 8.1 Windows 64 bit. Thanks for any help.

  It's the right specification my guess is that the module is faulty. I would contact Lenovo to get a replacement.

• Error sending image to zero smart t510 HP spot

  So we have an image t510, we have configured, based on the image of T6X42019 ThinPro 4 most recent of HP. I used HPDM 4.5 to capture the final image, and it works very well to expel this image to any t510 race ThinPro 4 already. However, if I try to send the same hardware, running HP Smart zero Core, it fails with the error below. I want to be able to send this image to all t510 connected to the HPDM or running the other operating system. Someone knows what's the problem?

  2013-02-12 15:55:18 sent special to the device management gateway

  2013-02-12 15:55:19 task has been retrieved by the Agent.

  2013-02-12 15:55:21 image for deployment using master repository repository.

  2013-02-12 15:55:21 failure deployment 2-2 - 2013.dd.gz/Repository/Images/t510_2-12-13.

  2013-02-12 15:55:21 DOES NOT SUPPORT!

  2013-02-12 15:55:21 the common task cannot run.

  2013-02-12 15:55:21 ErrorCode: 14000052, detail of error: unsupported task.

  2013-02-12 15:55:21 the common task cannot run.

  2013-02-12 15:55:21 ErrorCode: 14000052, detail of error: unsupported task.

  Error message (task not supported), sounds like agent on Smart zero is not up-to-date. If you don't the have not already done so, wil you update the agent on the t510 Smart zero prior to sending the image update task.

• HP t510 and t5565z black screen

  Hello

  I have several HP t510 and t5565z thin using HP Smart Client OS we use for VMware View customers. Thin clients for very well most of the time. However occasionally they will get black screens and no longer respond. I would say that this probably occurs during long periods of inactivity may be several hours or more. Has anyone already experienced this? It can occur during a session connected or simply sitting lit all night.

  These thin clients also seem to have a kind of construction in both screen saver. Because they will go in this black screen after 15 minutes of inactivity. They return generally, but I can't find anywhere in the settings options or BIOS to kill this screensaver.

  To anyone reading this, I found a solution. I found myself by opening a ticket with HP about the sleep function screen integrated with Smart Zero Client generation. I was information this feature was not available without the component of profile manager of the HP Server deployment, you can use this thin client.

  I finished the switch back on the ThinPro build because you can control the screen saver and display the power options in the generation of HP. I had a feature request to HP to allow the screen saver and power display options to be greeted with the Smart customer zero built in the future because they added an Admin mode in the last generation, they pulled out for us who do not have enough of them to justify the use of the server component.

• T510 Citrix FontSmoothingType configuration changes not saved

  Hi all

  We recently bought a T510 because our existing customers (T5565) are now EOL, and we try to configure the T510 with similar parameters.  One of the parameters that the FontSmoothingType change us is in the file All_Regions.ini located in writing/home/user /. ICAClient.  However, the changes we make are not persistent after a reboot.

  That's what we do:

  fsunlock

  CD/writing/home/user /. ICAClient /.

  VI All_Regions.ini

  (Change FontSmoothingType = * to FontSmoothingType = 3)

  : wq

  fslock

  After the reboot, the file All_Regions.ini has been restored and the timestamp of the file is more recent, which suggests that the file is overwritten when starting.

  I can't find any other copy of All_Regions.ini which could be a version of "master".

  Hoping someone can help.

  OS: ThinPro 4 (T6X42019)

  Martin

  You must change the All_Regions.ini in/usr/lib/ICAClient/config. This change should be persistent.

  Concerning

• Memory for T510

  The T510 does support memory PC3L?

  I want to upgrade fomr 4 GB to 8 GB and find that PC3L is less expensive than the PC3 slightsly.

  Thank you.

  Most of the PC3L (1.35v) modules will support PC3 (1.5V) operation. I do not know of modules that don't work not to 1, 5V, but specifications for modules that you consider should tell you what you need to know.

• Update problem with win 7 to 8 T510

  I have a T510 just reinstalled Win 7 using the Lenovo recovery and now I'm looking to move to Win 8 to give a try.

  I'm lazy, so I just uninstalled programs that are specifically highlighted by the Upgrade Wizard of Windows 8 in the process, not those listed incompatible in the compatibility table, but those that actually prevents the upgrade of the instance Wizard. And apparently just uninstall them is not enough.

  The problem is that I don't know exactly what software is causing problems. Great thinkpad utility software seem to becoming major obstacles to the upgrade. And these drivers. However I really want to uninstall all of them and potentially found out that does not always upgrade. If I have to delete all software from lenovo, I assume a new installation be less obtrusive.

  So I was wondering if someone who has successfully upgraded could give the software or drivers that he or she has uninstalled or share another experience. I appreciate really.

  BTW, I wish Microsoft or Lenovo will come out a better Wizard upgrade who will deal with the problem of uninstalling for users. I know that Lenovo has a list of software that must be uninstalled. Are there opportunities you can make an exe or bat file this unistall all of them at once? I think that most of the thinkpad users like me still have the standard package installed as the machine arrived and it really save a lot of trouble.

  Thank you

  I think the Windows 8 package you downloaded can be used to make a new installation but also upgrade to Windows 7.

  If you run the Windows 8 package you downloaded, it should give you the ability to create a multimedia installation. Then take a 4 GB USB key, run the Windows 8 package, then select the option to install from Media create, or something to that description.

  Select the USB and it will create a Bootable Windows 8 installation.

  You can use this with your key, to create a new installation.

  I'm in dual boot on the same drive, for now while I get used to WIndows 8.

• T510s bricks after network power everything in Imaging

  Imaging remotely while some t510s, have been occasional glitches or latency on the network which has disrupted the process and resulted in arrangements of bricks.  Unfortunately, space limited to these models means that the image cannot be cached during the download.

  In general, the owner of such a device reported that the system was blocked in a progress bar and reboot the system to get anything at startup.

  Now that I have a little, I would like to know how to recover the aircraft.  They can start with errors but end with a console called "BusyBox v1.18.5" with a limited set of commands (and dd is not one of them).

  How can I retrieve these devices?

  Oh Hi

  I faced the same problem for the couple of ThinPro T510s.

  You need:

  1 - the Thinpro image on HP site. (sp61603.exe for T6X44017 version)

  2 - a USB Virgin

  How to:

  1 - Connect the usb key to your computer

  2. run sp61603.exe

  3 - Click on the USB Format and select your USB

  4. start your T510 bricked with this USB key and follow the instructions.

  Good luck