T520 24 '': T520 switching 24 roll on platter

Similar Questions

• T2300 out of notification paper

  I have two different types of paper in my T2300. The default behavior of the machine, when #1 roll is empty, is to automatically switch to roll #2 without any notification.  What I want is tell me when #1 roll is empty, so I can load another roll. Is there a setting somewhere that will prevent the automatic switch to roll #2? The machine will beep at me for several different reasons, I wish it would beep when it is out of paper.

  Hello great Jeniffer,

  To access the Protection Roll option, please follow the menu options listed below.

  Main menu > Setup > advanced printing preference > paper Option > roll of Protection.

  Make sure that the plotter has the latest version of the firmware

• Question simple reversal...

  Hi guys... Simple question...

  I have 1 MC with buttonMode = true. There are 2 text fields that are nested inside the graph 1 button inside the MC. My question is that when I roll my mouse and my switch, the roll effect is gone if I roll over my text fields... the mouse is still inside the button image but the roll effect has gone... see below...

  -------------------

  |  TextField one |

  |  TextField b | <-button

  |                 |

  -------------------

  I hope that I explain myself well... when I roll over to textfield a or b... the effect for my button, the reversal went... ideas? Thank you...

  use:

  yourmc.mouseChildren = false;

• Printing on roll paper using hp designjet t520

  Hello

  I bought a t520 24 "hp designjet printer that can print on a 24" or 600mm roll.

  The problem I have is that I can only select format A1 (594 mm x 840 mm) but I'm not able to select a custom size to really make use of the roller. Does anyone have experience with printing on rolls?

  Thank you

  Jakob

  We have a different designjet, but I may be able to help. Our current designjet is not postscript, and Custom is grayed out in the main menu to print. Enter the Page Setup and choose manage custom paper sizes, we can define the size here. On our printer, the unprintable area must be the moins.25 on the et.67 on the bottom sides, or Setup fails.

  I think that it's related to the absence of postscript because our previous design jet was equipped with postscript, and we were able to define page formats custom in the main window of the print.

• Designjet T520 36 inches (CQ893): Designjet T520 36 - in

  My tracer: HP designjet T520 36 inches (CQ893) start.

  The screen is blue, B87E7114 error code

  Turn off and turn on probably. Power button 15 seconds and powering button 50 seconds also.

  If push yellow power light. power on no beep error.

  End of warranty: 2015.02

  What is my error code?

  Thank you

  Sorry, but your post is very confusing.  You've got an ok error code, after that I do not understand what you mean by switch / stop and seconds.  First thing you need to do is to unplug the plotter of the power source.  Wait about 30 seconds and plug back in and if the power does not turn on by itself, use the power button to turn it on and tell us what appears on the screen.

• Designjet T520: Designjet T520: failure of the printer

  Had Designjet T520 about 18 months. Use it only for printing large format on roll paper. Error message: the printer failed. "There is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. »

  Have made the procedure "on - off" several times including disconnect, allowing the printer to sit idle and then plug it in, turn on and still the same problem. I also removed and checked each ink cartridge and cannot detect all problems.

  Remove all the ink cartridges and turn on the plotter.  When he asks the ink, put them in one at a time and see if the error is displayed when only one of the ink cartridges installed.

• HP Designjet T520 color prints have strips

  The plot of a file prn in an Autodesk product: Revit using HP paper, the color of drawing a 1 4 "strips that lighten a dark color. The stripes running lengthwise through the drawing, in parallel with the wide edge of 36 "of a conspiracy of 24 x 36. If the size of the plot is changed, the bands remain 1 1 4 "wide. Spare bands natural color for 1 1/4 ", then a band that clears up the same color, then color.  No banding occurs on the black and white prints

  It's a problem of correspondence of GIS of paper Type. When a roll of HP Designjet Bright white 24lb paper is used, the type of paper bearing the same name is selected, then the file printed correctly, no strip of color - Revit and Bluebeam.

  If the paper type does not match the paper roll in the HP T520, print quality has visible lines. On the touch screen of the printer, press 'Roll', touch "document Type", "More" touch, touch "Bond and covered with paper" or read the HP manual, page 107

• Designjet t520 36inch spit long paper instead of print

  Product is HP Designjet T520 36 "tracer. 36 "roll paper installed.  Printing from Adobe Acrobat, maps of large size, print to 35 "x 60". Sending of print on the drawing board causes the plotter spit a large white paper instead of print. Do you receive an error message.

  Help ~ it's wasting a whole roll of paper! There is no way to cancel or suspend the plotter when it feeds large blank sheets instead of print.

  We tried different settings. Updated the firmware today. Very frustrated ~ can someone help please?

  I solved my problem by determining there was something wrong with this particular PDF. As another PDF of the same size and similar content files have been feeling very well, I'm focused on PDF export process.

  This 'problem' PDF was created in ArcGIS. To resolve this problem, I have re-exported a new PDF, using graphics tablets vector (deflation LZW) and rasterize all symbols;  the new PDF print very well.

  ALSO, for anyone who uses Pipelogix with ArcGIS, make sure that your toolbar does not work properly. If you get the toolbar alerts, remove the toolbar and start a new session, before exporting a PDF file. This may sometimes cause the problem I mentioned above.

• T520 display blanks and blinks when plug/unplug the power

  the subject says it all.

  brand new t520 with optimus (nvidia + intel) display adapter, display of 1920 x 1080.

  whenever I have more in or unplug the power, the white for about 2 seconds, then flashes back on.

  the problem occurs if the bios setting is integrated, discreet, or optimus and th problem occurs even if the display settings are the same in the profile of AC and battery power.

  is this normal? It's very BAD.

  Thanks in advance.

  George

  Looks like he made the 50 Hz / 60 Hz switch...

• T520 Sales issues; Linux, IPS, fast car and more!

  Hey there! Been a while since I've been back. Did not have many problems with my X 301!

  It is high time that I buy a new PC, however! The T520 is - very - convincing. I have a few questions and comments before you buy it if:

  • 1. I see two ways to save money on my order:
  • 1. outside the cache, is there a substantial difference on real matrix between the i7-2820QM (2.30 GHz, 8 MB L3) and the i7-2630QM Sandy Bridge? I mean, will I miss out on all the features? 300 Mhz does not seem much difference, however, with Turbo Boost technology, I could be wrong.
  • 1B. ThinkPad memory is much too expensive. I found kits DDR3 1333 SO-DIMM 8 GB on NewEgg for $85. Is there a reason that I should pay $240 for the "upgrade"? In addition, you should opt for 1066 Mhz SO-DIMM because the CASE is weaker? I read something to that effect on AnandTech earlier.
  • 1 c. HDD, same thing as 1 b; I can get a 750 GB Scorpio Black for $110, but Lenovo would charge me the same for a 500 GB drive.
  • 1 d. Rapid Drive: Sweet, sweet, sweet. Current software is able to take care of this? I guess it will eventually, but the system has to be different to take care of her if I install the Soda Creek mSATA Intel 310? Theoretically, Lenovo will release an update for the BIOS so it can be flashed to leverage more away, right? In addition, Intel of just came out with a 25nm NAND in 320. Probably a good idea to wait for this upgrade, eh?
  • So, I guess that's two questions; the software may be able, and can I install it myself if I get the right hardware? I made a keyboard disposal facility with my X 301 to install a chip WWAN, wasn't bad at all. »
  • 1E. also related to the fast impulse; which adapter WiFi should I choose for this? Just the ThinkPad b/g/n, right? Because the SSD would be placed in the port of mSATA, it's wireless adapter where would also if I had an a better right? They are even better? (This could be subjective... but could be an interesting question.) I noticed the card lists a lot and a half. Which wireless chip goes into half slot, if any?
  • 1F. from my experience, and what I can tell, Lenovo will not be for lack of me or my warranty for the upgrade of my system, correct? $99 is a * beep * bargain for an extended warranty and peace of mind! AppleCare is $ 349. I have to pay all these geniuses.
  • 2. the FHD 1920 x 1080 is the slab IPS, correct? 95% range and 270 nits, as indicated on the data sheet. The reason why I ask is, it is not published on the generator type screen.
  • Comment; I don't mind 16:9, just put some dock tips and tabs on the side. Firefox 4 is released, it will not be a big deal to switch to Chrome for the tabs on the side; Chrome on: option flags has never worked for me.
  • 3 Linux. What works and what won't? I'm waiting for the fingerprint reader to not be compatible everything which, although I am surprised. I think that the DisplayPort adapter will be fine. Never used eSATA, but I expect it works fine as well. I really wonder about the discreet Quadro. Anyone who has a mobile Quadro might be able to comment on performance and display drivers? In addition, it is not a configuration of Optimus, is it? Terrible support on this issue, from what I can tell.
  • Comment: I much prefer me some Ubuntu, especially with some 11.04 on the horizon. Yes, Yes, the unit is very well. I wish they would have gotten the new Wayland display server works, but I guess it's better if they flesh out all the kinks...
  • It is not a deal breaker if I can't do Linux. Would be just nice, it's such a fun OS, and I use it as my exclusive system on my X 301.
  • 4 power. With the 6-cell battery life is announced as 7.7 hours. Impressive application! I don't know that I could even approach in Windows. I can wish to stay with Windows and Linux not for that reason alone. ... A 9-cell will protrude. Just like a slice.
  • 5. discrete GPU. I want to just comment with 48 CUDA cores, it sounds like a beast of a part. Just curious, is this GDDR3 or GDDR5? I'm assuming that the latter, but you never know with Nvidia. But... I do not know the question that arises is begging: run Crysis?
  ?
• Finally, 6. Is there a way I can get deals on the T520 right now? I have a finger that itches, just not wait... If this isn't the case, I'm cool to pay for more soft material on the market!

In any case, I hope some people here might be able to add their own thoughts on the things I've discussed. I hope that's not too redundant to other threads here, too. If so, link me to the top!
Also, are not obliged to answer all these questions at once. I'd be surprised if a person is Len337 good enough answer to everybody, and I don't expect that. It is the power of a community, after all.

1E. can't remember of the top of my head at 23:40 on the thing all full-slot/half-slot...
1F. the HMM is your friend.
2. as far as I know, there is no other IPS from Panel thing than the X 220 Tablet / X 220.
6. I check RedFlagDeals often because they have a specific page of the Canada. (Is there a strange script that maintains an infinite looping Firefox don't like a lot).

• Designjet t520: designjet t520 error b3d73738

  HP Designjet T520 36 inches gives b3d73738 on the screen, never seen that before and isn't anythong on this subject,

  the printer does not start or let me take any operation

  need urgent hepl on this issue.

  Thank you

  Hello

  Try the following

  -Replace the power cable

  -Connect the printer to a different outlet

  -Isolate the printer, remove the ink cartridges, print head, cable connectivity

  If you still have problems, you may need to replace the APC's hand

• HPDM 4.7 / HP T520: Error Code 34603008 / Imaging with HPDM 4.7

  Hi all

  I have a problem with a T520 HP with HP Device Manager 4.7 SP4 running on the server 2012R2, trying to capture an image from a T520 HP ThinPro 6, version of the 4.7.3671.25484 agent.

  Capture the profile and the settings worked. Server and devices are in the same subnet. Manual on the thin client for server ftp works. There is no activity in the ftp server log when I start the process of the image. The Windows Firewall is disabled. Activating set mode cache does not work because it is not yet supported for ThinPro 6.

  2016-09-19 12:04:43 [Fehlercode: 34603008] [Modul: Agent] [category: 0] 2016-09-19 12:04:43 [Fehlerdetails]: Erfassen Sie das Image in das Master-repository. Fehler beim/Repository/Images/Spegg_T520_ThinPro6 auf his Pracht von Spegg_T520_ThinPro6.dd.gz. Implement von CaptureImage-task fehlgeschlagen. Fehlercode: 34603008, Fehlerinfo:... /... / Task/common/MachiningTask.h@39: failed to manage the image of post. .. /.. / Task/linux/ImageTask_Thinpro.cpp@1583: Imaging operation failed. .. /.. / Task/common/ImageTask.cpp@259: could not get the return code of the update file is returned.

  This problem has been reported once or twice for older versions of hpdm but I was unable to find a solution.

  Greetings

  To Support ThinPro 6.1 on T520, please use the 4.7 Service Pack 5.

• T520: T520 Windows 10, installs updates always up-to-date

  Iamge for T520 Win10 and deployed, clients attempt to install updates windows repeatly when turnrd, fill do Write Filter being on. What is the preferred method of diabling updates on an image of Win10? I think that the base image would have this pre configured?

  HP Win10 IoT Enterprise 64-bit Service difficulty 0001

  Description:

  This package contains a fix of service to address the issue of the Windows Update screens unexpected on thin clients of IoT Enterprise 64-bit of Windows 10 when Windows Update is disabled.
  
  These screens do not actually come from Windows Update, but use the same user interface. This fix prevents the intermittent cases where these screens appear during a reboot.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8604911 & swItemId = vc_169708_1 & swEnvOid = 4195

• Designjet T520: Designjet T520 24 in. don't size printing

  Hello

  I try DJ T520 of my office to print a size D ANSI drawing. We bought this one a few months ago and it works fine, but I found an option that we had in our old office in isn't there anymore. I used to be able to rotate the print 90 degrees manually in the print settings. Because we have 24 in the version of the printer, I need to print the drawing in the portrait which means he needs to rotate 90 degrees, so it can adapt. Is there a way of setting this? Is this just a problem of drivers? I worked with our company this GUY to try to understand this. Thank you!

  Please see the section "Use paper economically" to the following HP web link to use the desired job rotation option:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03559791

  I hope this helps!

• Designjet T520: Designjet T520 PCA main Board

  Why the different part numbers for a 24 "and 36" Designjet T520 hand PCA Council?

  Can I interchange the two parties?

  24 "CQ890-67081

  36 "CQ890-67097

  Hello

  Yes, they use the same hand APC

  Do not use a main ACP USED, you will have other problems.